Commit Graph

112 Commits

Author SHA1 Message Date
morris
54abf1d0b9 Merge branch 'ci/esp_eth_new_runners' into 'master'
feature/ci/esp_eth: new app_test and runner

Closes IDF-3561 and IDFGH-1736

See merge request espressif/esp-idf!14392
2021-09-09 04:16:08 +00:00
David Čermák
39b7d3e13f Merge branch 'bugfix/eth_dm9051_not_responding' into 'master'
esp_eth: Fix dm9051 Rx interrupt processing

Closes IDFGH-4598

See merge request espressif/esp-idf!15073
2021-09-08 14:25:27 +00:00
SalimTerryLi
14a6ab4a8e
esp_eth: new test_app: emac layer tests 2021-09-08 20:00:14 +08:00
David Cermak
676cd99c42 esp_eth: Fix dm9051 Rx interrupt processing
* Disable Tx interrupts to fix race condition of missing Rx interrupt
* Check if GPIO interrupt is asserted periodically if the ISR event missed

Closes https://github.com/espressif/esp-idf/issues/6414
2021-09-07 16:38:43 +02:00
laokaiyao
04970fe487 iperfUtility: add udp rx bandwidth scan 2021-09-01 19:11:28 +08:00
laokaiyao
8d18a9c614 emac: optimise iperf performane 2021-09-01 19:11:28 +08:00
morris
ab0c5fed25 eth: dont warn nego timeout if link is down 2021-08-27 15:30:46 +08:00
Ondrej Kosta
300618e5be Merge branch 'feature/dual_eth' into 'master'
esp_eth: add support for multiple Ethernets modules at a time

Closes IDFGH-5596

See merge request espressif/esp-idf!14640
2021-08-27 06:11:48 +00:00
Ondrej Kosta
ef30384902 esp_eth: add support for multiple Ethernets modules at a time
Ethernet driver events properly bounded with ESP NETIF actions to support multiple Ethernet modules used at a time.

Components using Ethernet updated to conform with new API.

Closes https://github.com/espressif/esp-idf/issues/7318
2021-08-24 17:10:36 +02:00
Ondrej Kosta
a37e4b18c6 phy_lan87xx: extended Vendor Specific Registers definition
Extended Vendor Specific Registers definition to include definitions for LAN8740A/LAN8741A/LAN8742A

Closes https://github.com/espressif/esp-idf/pull/7269
2021-08-10 15:54:32 +02:00
Ondrej Kosta
404905d5f1 esp_eth: Add support to LAN87xx family
Merges/Related-to https://github.com/espressif/esp-idf/pull/7097
2021-07-28 19:34:05 +08:00
Ondrej Kosta
02a432b8d3 Fix invalid ETH_MAC_DEFAULT_CONFIG macro in C++ 2021-07-19 09:56:07 +02:00
morris
8e069dd755 emac: configure data interface early
Related to https://github.com/espressif/esp-idf/issues/7227
2021-07-13 15:10:23 +08:00
Ondrej Kosta
a6db3a5e77 esp_eth: Change clock mode setting
RMII clock mode is made to be run-time configurable.

Closes https://github.com/espressif/esp-idf/issues/6564
Closes https://github.com/espressif/esp-idf/issues/7107
2021-07-08 14:27:31 +02:00
laokaiyao
fe354f1c50 hal/emac_hal: refactord emac_hal 2021-06-16 09:48:21 +08:00
David Cermak
45846f06cf esp_eth: Improve GPIO interrupt processing in w5500 driver
Increase the interrupt reassert level timing so the chances of missing
two consecutive events are minimal.
Enable only SIR_RECV interrupt event, so the SEND events are not used
for GPIO signal.
2021-05-25 04:52:46 +00:00
David Cermak
0cd021adb1 esp_eth: Recover the w5500 driver from missed io interrupt
If the GPIO interrupt is re-asserted too quickly it could be missed. If this happens the driver goes silent and never receives any data. Recover by periodic checks of the IO signal level
2021-05-25 04:52:46 +00:00
morris
0c25793b06 esp_eth: restart negotiation in esp_eth_start 2021-05-18 11:16:32 +08:00
morris
83f2d802ce esp_eth: fix default PHY reset gpio
Closes https://github.com/espressif/esp-idf/issues/7034
2021-05-18 11:16:05 +08:00
Jon Shallow
154ad2e0e1 esp_eth_mac_openeth.c: Fix issue created by generic check macros update
Merges https://github.com/espressif/esp-idf/pull/6936
2021-04-26 08:40:07 +00:00
David Cermak
1e674f1d20 esp_eth: Update KSZ8851SNL driver to use global error checkers
Also updated KSZ8851SNL per internal code review:
* Removed Link status change interrupt as it's handled with polling
* Added auto negotiation timeout
* Updated typedefs, moved types to appropriate source, updated
  components/esp_eth/src/ksz8851.h to use only inherent device types
* Applied IDF code formatting
* Updated header file order to include first the most generic to more
  specific
2021-04-22 13:55:51 +00:00
Vladimir Chistyakov
c4f131e6ee esp_eth: Add a KSZ8851SNL SPI Ethernet driver
Implement the PHY and MAC layers in the driver similar to
the W5500 driver.

Update Kconfig, CMakeLists.txt, and component.mk to incorporate
the changes.

Resolves: #6542

Merges https://github.com/espressif/esp-idf/pull/6636
Closes https://github.com/espressif/esp-idf/issues/6542
2021-04-22 13:55:51 +00:00
morris
0733adab5e esp_eth: using esp_timer to check link status 2021-04-21 13:08:07 +08:00
morris
537617aec7 esp_eth: support user customized PHY io function
Closes https://www.github.com/espressif/esp-idf/issues/6745
2021-04-21 13:08:07 +08:00
morris
ef344d89ae esp_eth: apply generic error check macros 2021-04-13 10:54:33 +08:00
David Čermák
0f36a2dd16 Merge branch 'bugfix/eth_w5500_4byte_corruption' into 'master'
esp_eth: Fix w5500 read register operations

Closes IDFGH-4776 and IDFGH-4400

See merge request espressif/esp-idf!13060
2021-04-12 14:26:30 +00:00
David Cermak
7af358ed93 esp_eth: Fix w5500 to break from potentially infinite tx loop
The issue typically happens for link-down during Tx. Added two retry levels, one before checking the sanity of the w5500 phy register and another for the Tx done itself (if the device is in the sane state)

Closes https://github.com/espressif/esp-idf/issues/6233
2021-04-12 07:59:40 +00:00
David Cermak
dfe9580967 esp_eth: Fix w5500 to correctly read registers on -Os
Reading SPI data may come in 4-byte units and thus result in unwanted
overwrites if smaller size registers read, especially if multiple placed
one after another. Fixed by using direct reads to `trans` structure for
sizes smaller or equal to 4.

Closes https://github.com/espressif/esp-idf/issues/6579
2021-04-12 07:59:40 +00:00
Omar Chebib
cd79f3907d gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3
When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible
to set pins 18 and 19 as GPIOs. This commit solves this by manually
disabling USB JTAG when using pins 18 or 19.
The functions shall use `gpio_hal_iomux_func_sel` instead of
`PIN_FUNC_SELELECT`.
2021-04-08 14:01:18 +08:00
morris
2a34b0496c esp_eth: refactor ksz8041 driver into ksz80xx 2021-03-30 08:53:15 +00:00
Patrick Wieder
98a4c70af9 Added support for Ethernet PHY KSZ8081
Merges https://github.com/espressif/esp-idf/pull/6578
2021-03-30 08:53:15 +00:00
morris
9d7ba4c49a eth_phy: fix wrong register bit order in ksz8041 2021-03-30 08:53:15 +00:00
morris
006a87557b esp_eth: added option to disable soft flow control when rx buffer is few 2021-02-01 14:14:54 +08:00
suda-morris
0208810eca esp_eth: fix typo in lan8720 driver
Closes https://github.com/espressif/esp-idf/issues/6469
2021-01-27 23:48:10 +08:00
morris
c010f24d8b esp_eth: deprecate esp_eth_receive
Ethernet driver is interrupt driven only, don't support polling mode.
So deprecate esp_eth_receive API.
2021-01-27 23:48:01 +08:00
Axel Lin
2049aa9f68 esp_eth: Add ioctl command for getting duplex mode
Similar to ETH_CMD_G_SPEED, add ETH_CMD_G_DUPLEX_MODE for getting duplex mode.

Merges https://github.com/espressif/esp-idf/pull/6436
2021-01-25 08:40:47 +00:00
morris
753a929525 global: fix sign-compare warnings 2021-01-12 14:05:08 +08:00
morris
c280dc3ac5 eth: added cert for download test 2021-01-07 11:22:23 +08:00
morris
1e905acacf eth: support W5500 MAC RAW mode
W5500 features an Ethernet MAC+PHY, plus a HW SOCKET implementation.
But in IDF, we only use software TCP/IP stack, which means we have
to bypass the HW TCP/IP stack in W5500.
So we enables the MAC RAW mode in W5500.
2020-11-16 13:30:49 +08:00
Angus Gratton
420aef1ffe Updates for riscv support
* Target components pull in xtensa component directly
* Use CPU HAL where applicable
* Remove unnecessary xtensa headers
* Compilation changes necessary to support non-xtensa gcc types (ie int32_t/uint32_t is no
  longer signed/unsigned int).

Changes come from internal branch commit a6723fc
2020-11-13 07:49:11 +11:00
Angus Gratton
66fb5a29bb Whitespace: Automated whitespace fixes (large commit)
Apply the pre-commit hook whitespace fixes to all files in the repo.

(Line endings, blank lines at end of file, trailing whitespace)
2020-11-11 07:36:35 +00:00
Yorick van Pelt
65707cfb41 esp_eth_mac_esp32: optionally setup SMI GPIO's
This enables passing smi_mdio_gpio_num = -1 to disable that signal

Merges https://github.com/espressif/esp-idf/pull/5903
2020-09-25 19:59:41 +08:00
Renz Bagaporo
6462f9bfe1 esp32, esp32s2: create esp_pm component 2020-09-25 05:24:10 +00:00
morris
9fa06719fa global: enable build uinit test for esp32-s3 2020-09-22 15:15:03 +08:00
Ivan Grokhotkov
b6467257b9 Merge branch 'feature/cmock_component' into 'master'
cmock as component replacing unity

See merge request espressif/esp-idf!9859
2020-09-10 16:06:20 +08:00
Jakob Hasse
f7f46905ec esp_eth: moved extern "C" after includes 2020-09-08 17:44:57 +08:00
morris
31aa16bbe6 unit_test: switch icmp test server to taobao 2020-09-06 09:42:44 +08:00
Jakob Hasse
20c068ef3b cmock: added cmock as component
* changing dependencies from unity->cmock
* added component.mk and Makefile.projbuild
* ignore test dir in gen_esp_err_to_name.py
* added some brief introduction of CMock in IDF
2020-09-02 16:38:37 +08:00
morris
76fe489c58 ethernet: support power on timeout
Closes https://github.com/espressif/esp-idf/issues/5425
2020-08-10 18:54:25 +08:00
morris
f4131b9b42 ethernet: handle early rx interrupt 2020-08-10 18:54:25 +08:00