Commit Graph

46 Commits

Author SHA1 Message Date
zhangyanjiao
8abcacd25e esp_wifi: change max connection num on ESP32C3 and ESP32S3
Closes WIFI-5134
2022-12-22 11:45:50 +08:00
jack
43f93678ce reduce the max connection number to 15 2022-12-07 18:04:46 +08:00
zhangyanjiao
5c1ff3d70b Modify maximum softap conn num and espnow encryption peer num 2022-12-07 11:33:00 +08:00
Li Shuai
e4c5e5a701 sleep: beacon loss and noise check timer optimize for wifi power save 2022-08-04 12:11:39 +08:00
Zhang Jun Hao
f490adf800 esp_wifi: support station only mode for code size down 2021-12-06 17:34:56 +08:00
Kapil Gupta
797c7144bd esp_wifi: Add support for GCMP and GMAC ciphers 2021-10-12 20:48:51 +08:00
alex.li
26d8b7ee17 Add HW external coexist api.
Simplify the external coex flow.

And replace gpio of driver interface with hal one.
2021-10-12 14:05:14 +08:00
chenjianxing
564068d5af esp_wifi: support esp32s3 wifi and fix not tx 9M rate issue 2021-07-06 11:38:40 +08:00
Shu Chen
75bd02bd46 esp32h2: add some more fixes and TODOs 2021-07-01 20:36:39 +08:00
Shu Chen
ee23a489b9 esp32h2: code clean up 2021-07-01 19:53:50 +08:00
Shu Chen
be9864fa4b esp_wifi: add CONFIG_WIFI_ENABLED config option
The WIFI_ENABLED option is disabled for esp32h2.
2021-07-01 19:53:11 +08:00
Zhang Jun Hao
4702feeeeb esp_wifi: move unused wifi log to noload section to save binary size 2021-07-01 10:18:37 +08:00
Kapil Gupta
a7713676b8 wpa_supplicant: Fix crypto related bugs
1. Fix aes_unwrap functionality when hardware acceleration is disabled
2. Fix compilation errors when mbedTLS is disabled.
3. Disable WPA3 when mbedTLS is disabled.
2021-06-28 19:50:01 +08:00
Shu Chen
6061a547e5 esp_phy: decouple esp_phy component from esp_wifi and bt
* add esp-phy-lib submodule
* move libphy.a and phy_init.c from esp_wifi to esp_phy
* move librtc.a from esp_wifi to esp_phy
* move libbtbb.a from bt to esp_phy
* corresponding updates to build system
2021-06-03 16:17:31 +08:00
chenjianxing
41882082f7 esp_wifi: re-enable phy calibration data to nvs for esp32c3 & esp32s3 2021-05-20 21:55:59 +08:00
Li Shuai
7fbf7a0d17 modem sleep: optimize wifi station modem sleep percentage 2021-05-12 17:00:01 +08:00
Nachiket Kukade
c93907fb27 wifi/ftm: Move FTM report logging into application and some bugfixes
Move FTM report processing and logging to application
Update wifi lib with below bugfixes
1. Initiator parameters sanity checks
2. Responder config option, fix beacon caps
3. To save space, register FTM modules only when FTM is enabled

Co-Authored-By: Nachiket Kukade <nachiket.kukade@espressif.com>
Co-Authored-By: Zhang Jun Hao <zhangjunhao@espressif.com>
2021-04-20 03:44:51 +00:00
Renz Bagaporo
7d85c42e52 esp32: move brownout and cache err int setup 2021-03-31 19:13:03 +08:00
0xFEEDC0DE64
63a7a8489b Init phy data to default if invalid in flash partition to avoid bootloops
Signed-off-by: ronghulin <ronghulin@espressif.com>

Merges https://github.com/espressif/esp-idf/pull/6610
2021-03-24 15:44:48 +08:00
ninh
deb94f4768 esp_wifi: support sta to sleep at disconnected status 2021-03-12 00:20:09 +08:00
Li Shuai
1595973fe8 light sleep: some default parameters optimization 2021-03-10 18:22:41 +00:00
Xia Xiaotian
ce8b996ca0 esp_wifi: synchronize Wi-Fi adapter between different chips
Support preferring to allocate Wi-Fi memory from PSRAM on ESP32-S3

Support Wi-Fi TX cache buffer on ESP32-S3
2021-02-26 11:29:50 +08:00
baohongde
eef66789d4 Mac BB power down in light sleep
components/bt: Do not use feature: timer support isr dispatch method

disable controller after wake up finished.

protect critical section of power down

choose clk in sleep

components/coex: mac bb power down in light sleep

components/coex: Macro changed

components/os: protect reserved interrupt number

update phy to phy_version 300,6e46ba7,Jan 25 2021

some bugfix
2021-01-28 22:28:04 +08:00
Nachiket Kukade
8de3b31d2d FTM support for ESP32-C3 and connectionless mode
1. Support for FTM to work without any connection
1. Support for ESP32-C3 chip
3. Fix error case handling if FTM fails
4. Fix asynchronization, re-transmission related issues
2021-01-27 20:49:07 +05:30
Nachiket Kukade
acb1143409 Add support for FTM operation
Add FTM support for below configuration -
1. Station(connected) as Initiator with AP as responder
2. SoftAP as responder with the connected Station
Added Station example with runtime FTM configurations.
2021-01-27 10:57:41 +05:30
ninh
659d805411 esp_wifi: light sleep optimization 2021-01-18 15:31:03 +08:00
ronghulin
adfa43a3a4 feature: support tx amsdu 2021-01-15 20:10:18 +08:00
Chen Jian Xing
5b44295cb9 esp_wifi: fix esp32c3 code issues
1. enable wifi clk and rm dport header
2.syn phy_init_data.h from esp32
2021-01-10 16:16:28 +08:00
liu zhifu
fa9a5c0be5 esp_wifi: optimize WiFi TX performance 2020-08-13 12:26:21 +08:00
ChenJianxing
9e45c3c7d8 esp_wifi: remove wifi tx buffer limits 2020-05-27 15:06:53 +08:00
Nachiket Kukade
107cf56e20 esp_wifi: Enable WPA3 & PMF by default
In wifi station example, set PMF(Protected Management Frames)
configuration to capable. Set WPA3 Feature in menuconfig enabled
by default. This will allow device to establish more secured
connection with AP's that support these protocols.
2020-05-04 16:02:14 +05:30
ronghulin
ffd8c26780 feature: support multiple PHY init data 2020-03-05 16:14:00 +08:00
Angus Gratton
eb85cfb9f6 docs: Temporarily mark RF calibration chapter as ESP32 only
Can be re-enabled once ESP32-S2 calibration support is added
2020-02-07 16:37:45 +11:00
baohongde
a2398f0dcc components/esp_wifi: improve coexistence performance according to specific WiFi/BT/BLE scienario
1. Improve WiFi throughput in some Classic BT scienarios(idle, inquire scan,
       connected, sniff, a2dp pause, etc).

    2. Support WiFi + Classic BT + BLE mesh coexistence scienario.

    3. Improve WiFi scan and connect succeed ratio in coexistence scienario.

    4. Do not support to choose software coexistence preference anymore for it is
       determined according to coexistence scienario automatically.

components/lwip: increase TCP send buffer and receive window limitation when TCP window scale is enabled

components/ble_mesh: Fix some bugs about ble mesh

    1. fix send acl pkt after ble have sent terminate ind modify min adv interval to 10ms.
2020-01-10 16:00:12 +08:00
Nachiket Kukade
f2e37c4ca8 wpa_supplicant: Support WPA3 4-way handshake, add config option
1. Add changes in 4-way handshake path to allow SAE key mgmt.
2. Support for configuring WAP3 at init time, added Kconfig option.
3. Handle and propagate error conditions properly.
4. Link changes from WiFi library.
2019-11-26 10:59:55 +05:30
xiehang
b7334b0366 esp_wifi: Turn off wifi iram optimization by default, when using both Bluetooth and psram 2019-11-14 15:20:53 +08:00
xiehang
5e7f43f3d1 esp_wifi: Put some rx code to iram 2019-11-13 11:44:23 +00:00
Ivan Grokhotkov
5830f529d8 Merge branch 'master' into feature/esp32s2beta_merge 2019-10-02 19:01:39 +02:00
Roland Dobai
833822c10b Fix Kconfig issues discovered by upstream Kconfiglib 2019-09-23 16:10:57 +02:00
Angus Gratton
24d26fccde Merge branch 'master' into feature/esp32s2beta_update 2019-08-08 13:44:24 +10:00
Xia Xiaotian
99ef587a05 run WiFi on ESP32SBETA 2019-06-28 11:34:49 +08:00
liu zhifu
5d855fcdef esp_wifi: add limitation for setting maximum WiFi TX power
Limit the WiFi TX power range to 10dBm ~ 20.5 dBm
2019-06-27 17:28:59 +08:00
liu zhifu
d1e7d04f9b esp_wifi/lwip: support TCP window scale
Support enable/disable TCP Window scale feature via menuconfig
2019-06-04 14:09:04 +08:00
Roland Dobai
0ae53691ba Rename Kconfig options (components/esp32) 2019-05-21 09:09:01 +02:00
Roland Dobai
b8111ab1d5 Rename Kconfig options (components/esp_wifi) 2019-05-21 09:09:01 +02:00
suda-morris
958c2792e3 move WiFi-specific Kconfig to esp-wifi component
1. separate Kconfig from esp32 component
2. modify component.mk for esp_wifi a little bit to make it depend on IDF_TARGET
2019-04-11 12:33:15 +08:00