Commit Graph

330 Commits

Author SHA1 Message Date
morris
9b3ae86417 Merge branch 'bugfix/fix_gpio_etm_multi_task_v5.2' into 'release/v5.2'
fix(gpio_etm): allow one GPIO binds to multiple ETM tasks (v5.2)

See merge request espressif/esp-idf!30456
2024-04-25 16:31:22 +08:00
Song Ruo Jing
15962a953a fix(uart): Fix mismatch wakeup rising edges required with the threshold configured
Closes https://github.com/espressif/esp-idf/issues/12586
2024-04-24 16:25:54 +08:00
Song Ruo Jing
373e585bb7 fix(gpio_etm): allow one GPIO binds to multiple ETM tasks 2024-04-24 16:01:34 +08:00
Li Shuai
9c8b54b886 change(esp_hw_support): use new retention api to implement gdma retention 2024-04-22 12:49:33 +08:00
Song Ruo Jing
c55a07bf57 refactor(uart): add support to be able to test LP_UART port
Increase LP_UART_EMPTY_THRESH_DEFAULT value to 4. The original value
could cause the FIFO become empty before filling next data into the FIFO
when the buadrate is high. TX_DONE interrupt would raise before actual
transmission complete in such case.
2024-04-15 19:39:30 +08:00
morris
d56ae4caab Merge branch 'feature/support_i2c_timeout_v5.2' into 'release/v5.2'
feat(i2c_master): Add parameter to config I2C scl await time (backport v5.2)

See merge request espressif/esp-idf!30069
2024-04-07 18:36:55 +08:00
Cao Sen Miao
7c233ebc80 feat(i2c_master): Add parameter to config I2C scl await time 2024-04-07 15:06:31 +08:00
Jeroen Domburg
bf15a29e18 fix(driver): Add docs and driver fix for the case where a full EP does not cause the host to pickup the data 2024-04-03 17:04:59 +08:00
hongshuqing
b3a73d5b63 feat(pmu): set fix voltage to different mode for esp32c6 2024-02-22 14:49:01 +08:00
Darian Leung
f0219b73f9
refactor(hal/usb): Rename usb_fsls_phy API to match header/source names
Note: Also fixed some formatting issues in usb_wrap_struct.h
2024-02-19 15:45:02 +08:00
Darian Leung
f2ede42191
refactor(hal/usb): Rename usb_phy files to usb_fsls_phy
This commit renames USB PHY related HAL files from "usb_phy_xxx" to
"usb_fsls_phy_xxx" since they are only designed to support Full-Speed/Low-Speed
Serial USB PHYs. This renmaing is done to accommodate future USB PHYs that use
other PHY interfaces (e.g., UTMI, ULPI etc).
2024-02-19 15:45:01 +08:00
xiaqilin
c9ead16682 fix(ieee802154): fix the issue of not receiving packets when RSSI is positive in esp32h2 2024-01-04 15:13:49 +08:00
zwx
61379f09cd fix(pm): fix extra retention function to iram
* Also remove unused function on H2
2023-12-28 17:47:30 +08:00
wuzhenghui
6d238cdba2
feat(ulp): add api to get lp_cpu wakeup cause and clear wakeup source at startup
Closes https://github.com/espressif/esp-idf/issues/12651
2023-12-27 19:12:16 +08:00
Jiang Jiang Jian
a80717fbd5 Merge branch 'feature/support_suspend_on_120m_v5.2' into 'release/v5.2'
feat(spi_flash): Enable auto suspend on when flash works under 120M (backport v5.2)

See merge request espressif/esp-idf!27951
2023-12-26 10:42:32 +08:00
Cao Sen Miao
e3a854769a feat(spi_flash): Enable auto suspend on when flash works under 120M 2023-12-15 16:57:53 +08:00
Cao Sen Miao
3d42ac21fa fix(tempertuer_sensor): Fix regs on temperature sensor is not volatile due to GCC bug 2023-12-15 16:36:43 +08:00
wuzhenghui
debcb50fd2
fix(esp_hw_support): re-initialize icg map in modem_clock_module_enable 2023-12-08 14:18:45 +08:00
morris
1fb97c1718 Merge branch 'bugfix/fix_adc_continuous_do_not_rst_apb_clk_v5.2' into 'release/v5.2'
fix(adc): fix adc continuous get less results beacuse do not reset apb clk (v5.2)

See merge request espressif/esp-idf!27600
2023-12-07 15:11:26 +08:00
Cao Sen Miao
191466d824 fix(bod): Reset brownout in configuration to avoid RF cannot be enabled again 2023-12-06 19:46:44 +08:00
gaoxu
ca3bcb18b0 fix(adc): fix adc continuous get less results beacuse do not reset apb clk 2023-12-04 11:56:24 +08:00
Song Ruo Jing
55ed548cc6 fix(console): enable to select UART1 port for console output
This feature was only enabled for esp32, esp32s2, esp32s3 previously.
Now, enabling this feature for all targets.
2023-11-30 11:26:09 +08:00
Lou Tianhao
d7ae1665f1 fix(pm/ext1): fix c6 h2 lp_aon_ll_ext1_set_wakeup_pins func 2023-11-21 11:31:53 +08:00
Jiang Jiang Jian
9d694e40ed Merge branch 'bugfix/clear_ulp_wake_intr_in_wake_source_enable_v5.2' into 'release/v5.2'
fix(esp_hw_support): clear all type ULP wakeup intr status at ulp wakeup source enable (backport v5.2)

See merge request espressif/esp-idf!27187
2023-11-17 11:04:23 +08:00
wuzhenghui
b7f1aa5292 fix(esp_hw_support): fix lightsleep current leakage on usb-phy controlled pad 2023-11-16 17:18:43 +08:00
wuzhenghui
adc8351458 fix(esp_hw_support): clear all type ULP wakeup intr status at ulp wakeup source enable 2023-11-16 11:47:20 +08:00
morris
621acc4d75 Merge branch 'feature/rmt_receive_in_isr_v5.2' into 'release/v5.2'
feat(rmt): support calling rmt_receive in ISR callback (v5.2)

See merge request espressif/esp-idf!26996
2023-11-13 12:22:33 +08:00
morris
be39a0d2aa Merge branch 'bugfix/fix_adc_read_zero_h2_v5.2' into 'release/v5.2'
ADC: fix adc raw data get 0 because of signal delay on ESP32H2(v5.2)

See merge request espressif/esp-idf!26933
2023-11-09 10:10:45 +08:00
morris
2e8cc61af7 feat(rmt): support calling rmt_receive in ISR callback 2023-11-08 14:32:26 +08:00
morris
80997d5860 fix(i2c): read write FIFO memory by volatile 2023-10-30 10:34:43 +08:00
gaoxu
a8e3122866 fix(adc): fix adc read zero after getting done signal on h2 2023-10-26 12:22:09 +08:00
Cao Sen Miao
8d639492f2 feat(i2c_slave): Add new implementation and API for I2C slave 2023-10-24 18:44:49 +08:00
morris
767595a22f Merge branch 'feature/mcpwm_timer_change_freq' into 'master'
feat(mcpwm): support update timer period dynamically

Closes IDFGH-11145

See merge request espressif/esp-idf!26419
2023-10-23 15:51:14 +08:00
morris
0cbcb9f5ea feat(mcpwm): support update timer period dynamically
Implement the requirement asked in
https://www.esp32.com/viewtopic.php?f=13&t=35919
2023-10-20 16:57:25 +08:00
wuzhenghui
1f10c84a4f change(hal): rewrite gpio_ll_set_iomux_pin_ctrl api 2023-10-19 22:24:08 +08:00
Wan Lei
a9b6c98489 Merge branch 'refactor/spi_using_rcc_automic_lock' into 'master'
refac(spi): update periph_module_xxx with rcc_atomic_lock for periph bus

Closes IDF-8159

See merge request espressif/esp-idf!26394
2023-10-18 20:36:51 +08:00
Wan Lei
9f413d5d8d Merge branch 'feature/esp32p4_hp_ledc_support' into 'master'
feat(ledc): support ledc on esp32p4

Closes IDF-6510

See merge request espressif/esp-idf!25356
2023-10-18 15:27:54 +08:00
Mahavir Jain
2407813a67 Merge branch 'feature/update_esp32c6-h2_apm_api' into 'master'
apm: updated APM HAL/LL APIs.

See merge request espressif/esp-idf!26368
2023-10-18 12:26:38 +08:00
Sachin Billore
c106f5caf6 apm: updated APM HAL/LL APIs. 2023-10-17 18:20:36 +05:30
wanlei
57614bbad2 feat(ledc): support ledc on esp32p4 2023-10-17 16:40:04 +08:00
wanlei
b81cafe42e refac(spi): update periph_module_xxx with rcc_automic_lock for periph bus 2023-10-17 11:32:23 +08:00
Mahavir Jain
6b62065b92 Merge branch 'fix/crypto_periphs_use_rcc_atomic_blocks' into 'master'
Use rcc atomic blocks to enable/reset crypto peripherals

See merge request espressif/esp-idf!25811
2023-10-13 22:37:58 +08:00
Song Ruo Jing
321f628ff5 feat(gpio): add a dump API to dump IO configurations
Closes https://github.com/espressif/esp-idf/issues/12176
2023-10-12 17:34:20 +08:00
harshal.patil
43864f7fb4
feat(ds): use RCC atomic block to enable/reset the DS peripheral 2023-10-11 14:59:04 +05:30
harshal.patil
18b93e9564
feat(hmac): use RCC atomic block to enable/reset the HMAC peripheral 2023-10-11 14:59:04 +05:30
harshal.patil
1c6ff8ce9f
feat(ecc): use RCC atomic block to enable/reset the ECC peripheral 2023-10-11 14:59:04 +05:30
harshal.patil
c5cc4f488a
feat(mpi): use RCC atomic block to enable/reset the MPI peripheral 2023-10-11 14:59:03 +05:30
Wan Lei
f92b18053a Merge branch 'feature/esp32p4_hp_spi_support' into 'master'
Feature/esp32p4 hp spi master driver support

Closes IDF-7502

See merge request espressif/esp-idf!24963
2023-10-09 18:37:35 +08:00
wanlei
00fcdce725 feat(spi_master): p4 add master driver supported 2023-10-08 14:45:12 +08:00
gaoxu
bc2a6bd730 feat(uart): spilt LP and HP uart set_baudrate function 2023-10-08 10:10:02 +08:00