components/os: Move ETS_T1_WDT_INUM, ETS_CACHEERR_INUM and ETS_DPORT_INUM to l5 interrupt
components/os: high level interrupt(5)
components/os: hli_api: meta queue: fix out of bounds access, check for overflow
components/os: hli: don't spill registers, instead save them to a separate region
Level 4 interrupt has a chance of preempting a window overflow or underflow exception.
Therefore it is not possible to use standard context save functions,
as the SP on entry to Level 4 interrupt may be invalid (e.g. in WindowUnderflow4).
Instead, mask window overflows and save the entire general purpose register file,
plus some of the special registers.
Then clear WindowStart, allowing the C handler to execute without spilling the old windows.
On exit from the interrupt handler, do everything in reverse.
components/bt: using high level interrupt in lc
components/os: Add DRAM_ATTR to avoid feature `Allow .bss segment placed in external memory`
components/bt: optimize code structure
components/os: Modify the BT assert process to adapt to coredump and HLI
components/os: Disable exception mode after saving special registers
To store some registers first, avoid stuck due to live lock after disabling exception mode
components/os: using dport instead of AHB in BT to fix live lock
components/bt: Fix hli queue send error
components/bt: Fix CI fail
# Conflicts:
# components/bt/CMakeLists.txt
# components/bt/component.mk
# components/bt/controller/bt.c
# components/bt/controller/lib
# components/esp_common/src/int_wdt.c
# components/esp_system/port/soc/esp32/dport_panic_highint_hdl.S
# components/soc/esp32/include/soc/soc.h
1. Use correct addresses of Bluetooth Low Power Clock registers on Chip 7.2.8 ESP32-S3
2. Disabled CS-RXDONEMSK to avoid RX interrupt flooding during scan event in coexistence scenario
* add esp-phy-lib submodule
* move libphy.a and phy_init.c from esp_wifi to esp_phy
* move librtc.a from esp_wifi to esp_phy
* move libbtbb.a from bt to esp_phy
* corresponding updates to build system
1. Removed the interrupt lock operation during controller enable/disable/reset, to avoid trigger interrupt watchdog time-out due to use of mutex/semaphore in coex_st_set
2. update libbtbb.a to fix the Rx performance issue for CODED PHY, especially in coexistence scenario
disconnect event. This issue is caused by modem sleep.The sleep interrupt
will come the second time before the CLKN interrupt. If we disable the sleep
interrupt when it comes in the first time, the CLKN will never come.
There was no need for this function as there is already a way present to
fetch own mac address. Own mac addr can be fetched by calling
controller_get_interface().
components/bt: Do not use feature: timer support isr dispatch method
disable controller after wake up finished.
protect critical section of power down
choose clk in sleep
components/coex: mac bb power down in light sleep
components/coex: Macro changed
components/os: protect reserved interrupt number
update phy to phy_version 300,6e46ba7,Jan 25 2021
some bugfix
free osi_funcs struct memory duiring failure of controller_init when necessary
components/bt: use s_lp_stat.phy_enabled to control the on/off of phy module
clean up style for controller_disable
clean up some empty functions and unnecessary comments
Added async wakeup src "BTDM_ASYNC_WAKEUP_SRC_TMR"
remove use of assert in controller_init, set error code upon some exceptions
move stop esp_timer early to phase0, add state variable wakeup_timer_started
Refactor bluetooth hardware PowerUp/PowerDown functions
component/bt: fix use of a deprecated MACRO "CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE"
component/bt: fix sleep wakeup in controller disable procedure
remove use of s_pm_lock_sem
1. Modified the waking up approach from async to sync: post a message to controller task upon vhci downstream packets or controller disable, and in response, controller task goes through the wake-up procedure
2. Added Controller status check for the esp_vhci APIs
3. Adjust the procedure during controller_init, check the validity of arguments first
Some minor modifications for bluetooth sleep control and configuration
1. use variable flag s_btdm_allow_light_sleep to control the use of s_light_sleep_pm_lock
2. use variable btdm_lpclk_sel to choose bluetooth sleep clock, support only for external 32kHz crystal temporarily
component/bt: improve async_wakeup function
1. check power state first and then decide if wakeup needs to be performed
2. change the meaning of the return value, if wakeup request is posted to controller task, then return true, otherwise return false
put sleep control logics in controller init/deinit/enable/disable together
Use s_lp_cntl struct: replace bool-typed variable sleep_backup_en with s_lp_cntl.mac_bb_pd
Use s_lp_cntl struct: replace bool-typed variable s_btdm_allow_light_sleep with s_lp_cntl.no_light_sleep
Use s_lp_cntl struct: replace global variable btdm_lpclk_sel with s_lp_cntl.lpclk_sel
create semaphore s_wakeup_req_sem only when low power mode is required
Use s_lp_cntl struct: use s_lp_cntl.wakeup_timer_required to control the wakeup timer
use s_lp_stat to replace original state variable sleep_backup_done and s_pm_lock_acquired
one minor change for mac_bb_pd settings init: return error status if memeory allocation failed
1.Fix supervision timeout in LLC DISC busy statue can not disconnect issue.
2.Solve the problem that the ble terminate ack packet may lose with a high probability in coex mode.
