The following changes have been made:
1. All FreeRTOS kernel source files are now placed in the
freertos/FreeRTOS-Kernel folder to match with the upstream folder structure.
2. All kernel include files are now placed in freertos/FreeRTOS-Kernel/include.
3. All port files are now placed in freertos/FreeRTOS-Kernel/portable.
4. All additions/customizations are placed in freertos/esp_additions.
5. All other miscellaneous files (README, License files etc.) are moved to
freertos/FreeRTOS-Kernel folder to match with the upstream.
6. Updated esp-cryptoauthlib to latest commit to resolve FreeRTOS
include dependencies.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
0 is a valid socket description, so should be accepted after we create a
socket. In IDF, though, it's just a theoretical issue, as customers have
to configure:
* FD_SETSIZE = CONFIG_LWIP_MAX_SOCKETS (from makefiles)
* CONFIG_VFS_SUPPORT_IO = n (from menuconfig)
(this configuration is currently broken, but if we adjust the IDF here
and there we could reproduce the issue)
Moved FreeRTOSConfig.h from include/freertos to include/esp_additions/freertos.
Updated FreeRTOS.h file to include FreeRTOSConfig.h without the
freertos/ prefix to match with the upstream file.
Renamed architecture specific FreeRTOSConfig.h files to FreeRTOSConfig_arch.h
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
LWIP has two definess for setting max number of sntp servers:
- Total number of handled servers
- max number of sntp's picked via DHCP
by default both values are equal to 1, but could be set separately
Signed-off-by: Emil Muratov <gpm@hotplug.ru>
When client's request refused by sending NAK, its record still resided
in the linked list of pooled addresses. It is okay from the spec
perspective (RFC2131.p16: Server MAY mark the offered address
unavailable), but would consume some memory if the client didn't retry.
Closes https://github.com/espressif/esp-idf/issues/6410
This commit brings two esp-lwip fixes to IDF:
1) Add configuration to disable DHCP client identification
2195f7416f
This config could be used to disable option 61 in DHCP packets, so that
clients will be identified by their chaddr only.
(This is the lwip upstream original behaviour)
2) Fix server_idx increasing to DNS_MAX_SERVERS and trigger the LWIP_ASSERT
5a567d52f7
When lwip doesn't have DNS server and resolve a domain address, the server_idx
will increase to DNS_MAX_SERVERS, which will trigger the LWIP_ASSERT and make device crash.
Closes https://github.com/espressif/esp-idf/issues/6878
If silent assert configuration is enabled, LWIP asserts are now 'silent' also.
Also updates KConfig to note that LWIP asserts are also disabled when asserts
are disabled globally (this was already the behaviour, but the config item
suggested otherwise.)
Progress towards https://github.com/espressif/esp-idf/issues/5873
This caused some unsigned int prints out to be printed as singed integer which made the logs unreadable, for example sequence numbers in TCP packet headers
LWIP_HOOK_FILENAME is used in IDF to define standard and default hooks for IDF port in LWIP.
Added ESP_IDF_LWIP_HOOK_FILENAME to customize additional hooks in lwip
Closes https://github.com/espressif/esp-idf/issues/6261
Include external ram section in the linker template to process it
through linker script generation mechanism. This enables redirection of .bss section to external memory using linker fragments
libnet80211, libpp, libbt, liblwip: Redirect .bss through fragments
Added lwIP hooks which could be optionally overwritten in the
application code. These three options are provided in Kconfig:
* NONE: No hook support
* DEFAULT: Default implementation is provided. If IDF doesn't
have a specific hook implementation, an empty stub is provided, which
could be overwritten by strong implementation in application code.
* CUSTOM: Hooks are declared only to be implemented in application code.
Merges https://github.com/espressif/esp-idf/pull/6034
1) kill_oldest_dhcps_pool() is only called when list has at least two members (assured with kconfig value limit), added assertion to ensure this function is used only when prerequisities are met
2) use after free reported in two places, since the analyzer checks also the scenario when the linked list has loops, added ignore tags
* If CONFIG_VFS_SUPPORT_IO=y, keep everything as it is now
* If CONFIG_VFS_SUPPORT_IO=n, defined syscalls which LwIP can
implement, such as read/write/close
* Make LWIP-only select implementation dependent on
CONFIG_VFS_SUPPORT_SELECT, deprecate CONFIG_LWIP_USE_ONLY_LWIP_SELECT
Make the link local negotiation for IPV6 in PPP optional and
configurable.
This is because some modems do not support the IPV6 negotiation and
sending IPV6CP frames would in some cases break the network
configuration phase, resulting in a timeout during the Phase Network.
Please note that this does not disable the IPV6 support for the outgoing
communication (IPV6 is still enabled even if this option is not
selected) but just for the local link between lwIP and modem.
Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>
Merges https://github.com/espressif/esp-idf/pull/4782
Closes https://github.com/espressif/esp-idf/issues/1065
On startup of the common interface (ethernet, wifi), the lwip netif hostname was assigned to confg value .
Fixed to assign to esp-netif hostname if it exists
Closes https://github.com/espressif/esp-idf/issues/4737
SOMAXCONN is expected to be defined in this header, but for the esp32
port is found in net/if.h from newlib.
Avoid the issue by including the net/if.h header in sys/socket.h so that
compatibility is preserved.
Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>
Merges https://github.com/espressif/esp-idf/pull/4637
Some applications (i.e. Azure IoT SDK) are expecting this header to
exist and to contain the tcp constants and description.
The esp32 did not wrap the lwip/tcp.h header, thus this commit adds a
compatibility layer.
Signed-off-by: Francesco Giancane <francesco.giancane@accenture.com>
Merges https://github.com/espressif/esp-idf/pull/4637
1. Improve WiFi throughput in some Classic BT scienarios(idle, inquire scan,
connected, sniff, a2dp pause, etc).
2. Support WiFi + Classic BT + BLE mesh coexistence scienario.
3. Improve WiFi scan and connect succeed ratio in coexistence scienario.
4. Do not support to choose software coexistence preference anymore for it is
determined according to coexistence scienario automatically.
components/lwip: increase TCP send buffer and receive window limitation when TCP window scale is enabled
components/ble_mesh: Fix some bugs about ble mesh
1. fix send acl pkt after ble have sent terminate ind modify min adv interval to 10ms.
esp_common/esp_compiler: renamed esp_macros file to a more specific one
esp_common/esp_compiler: removed CONTAINER_OF macro, it was a duplicate
components/freertos: placed likely macros around port and critical sections
component/freertos: placed likely macros on lists module
components/freertos: placed unlikely macros inside of assertion points, they likely wont fail
components/freertos: added likely macros on queue modules
FreeRTOS queues are one of most hot code path, because to queues itself tend to
be used a lot by the applications, besides that, queues are the basic primitive
to form both mutexes and semaphores, The focus here is to place likely
macros inside lowest level send and receive routines, since they're common
from all kobjects: semaphores, queues, mutexes and FR internals (like timer queue)
components/lwip: placed likely/unlikey on net-interfaces code
components/fatfs: added unlikely macros on disk drivers code
components/spiffs: added unlikely macros on low level fs driver
components/freertos: added likely/unlikely macros on timers and ticker
freertos/event_group: placed likely/unlikely macros on hot event group code paths
components/sdmmc: placed likely / unlikely macros on lower level path of sdmmc
components/bt: placed unlikely macros around bt HCI functions calling
components/lwip: added likely/unlikely macros on OS port code section
components/freertos: fix code style on tick handler
Added default sdkconfig for qemu build for the mqtt publish example,
Added environment configuration for running the same test on target
or in qemu
Updated missing example tests per latest ttfw refactoring
