- Avoid downgrading TLS ciphersuites when client RSA keys are larger than RSA-2048 bit.
- Note that when using bigger certificates on low-power chips without crypto
hardware acceleration, it is recommended to adjust the task watchdog timer (TWDT)
if it is enabled. For precise information on timing requirements, you can check
performance numbers at https://github.com/espressif/mbedtls/wiki/Performance-Numbers.
Enable FTM Responder mode for ESP32C6. Update wifi libs with below -
1. Break FTM State Machine code into separate functions
2. Use dynamic allocation for FTM session to save memory
3. Add API to get FTM report instead of event based mechanism
4. Add FTM Request retry and comeback support
Closes https://github.com/espressif/esp-idf/issues/6810
This commit replaces the use of portNUM_PROCESSORS and configNUM_CORES
macros in all of ESP-IDF. These macros are needed to realize an SMP
scenario by fetching the number of active cores FreeRTOS is running on.
Instead, a new Kconfig option, CONFIG_FREERTOS_NUMBER_OF_CORES, has been
added as a proxy for the FreeRTOS config option, configNUMBER_OF_CORES.
This new commit is now used to realize an SMP scenario in various places
in ESP-IDF.
[Sudeep Mohanty: Added new Kconfig option CONFIG_FREERTOS_NUMBER_OF_CORES]
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
Removed rogue semicolon from SMARTCONFIG_START_CONFIG_DEFAULT() macro. This
fixes build issues when this macro is used via C++ brace initialization.
Closes https://github.com/espressif/esp-idf/pull/12867
[Darian Leung: Updated commit message]
Signed-off-by: Darian Leung <darian@espressif.com>
- Updated WiFi libraries based on the IDF changes
- Renamed esp_wifi_native.h to esp_wifi_types_native.h
- Reverted forward declarations of native wifi types and HE types
- Forward declare as opaque structs only if we don't have native types (csi and ctrl_packet types)
- Add support for WPA3 + WPA3_EXT_PSK mixed mode
- Improvements in scan and connect path as per specifications along with
minor bugfixes
- When AP advertises all PSK modes (WPA, WPA2 and WPA3), make sure that
station treats it as WPA2_WPA3_PSK mixed mode.
Closes https://github.com/espressif/esp-idf/issues/12517
- WIFI_REASON_NO_AP_FOUND_W_COMPATIBLE_SECURITY will be reported for the following
reasons
-- AP has PMF required but station is not configured for pmf capable/required.
-- Station has PMF required but AP is not configured for pmf capable/required.
-- The AP is using unsupported group management/pairwise ciphers
-- OWE not enabled by station for found OWE AP
-- AP RSNXE parsing failed in supplicant
-- AP is in Independent BSS mode
1. fix the bug that station can't found AP when the authmode is WPA
2. fix wifi mode error when mesh start after station has connected to router
Closes https://github.com/espressif/esp-idf/issues/12646
This commit deprecates the "freertos/xtensa_api.h" and "xtensa/xtensa_api.h"
include paths. Users should use "xtensa_api.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_api.h"
- Replaced some calls with "esp_cpu_..." equivalents
- Add warning to compatibility header
1. Avoid possible crash scenarios while forming datapath
2. Modify peer records structure thus fixing issues in datapath establishment
3. Fix timer out of bound issue causing "No timer handle" warning
4. Fix miscellaneous service discovery and datapath issues
- Fixes issue with connecting and discovering WEP APs
- Expsnds the reasons for trigerring a disconnect using
REASON_NO_AP_FOUND_WITH_COMPATIBLE_SECURITY
-- SAE-PK configured as compulsory in sta config but disabled for the AP
-- SAE-H2e configured as compulsory in sta config but disabled for an AP
that has authmode as WPA3-PSK or WPA3-WPA2-PSK.
-- Open AP found but we have set password or enabled enterprise mode.
-- SAE H2E only ap but we have SAE HnP setup in config.
-- WPA3-EXT_PSK AP but SAE-H2E disabled in config
Adds 3 more ddisconnect reasons in case of No AP found.
1. REASON_NO_AP_FOUND_IN_RSSI_THRESHOLD : AP rejected because it did
not meet rssi threshold.
2. REASON_NO_AP_FOUND_IN_AUTHMODE THRESHOLD : AP rejected because it
did not meet security threshold.
3. REASON_NO_AP_FOUND_WITH_COMPATIBLE_ SECURITY : AP rejected because
of incompatible security configuration. These situations could include
-- bss offerring WEP, but our password is not WEP compliant,
-- Encrypted AP bss but we have no password config set.
-- AP is Enterprise but we have not setup enterprise config and vice versa
Closes https://github.com/espressif/esp-idf/issues/5957
1.Optimize bin size for STA only mode
2.Change fragment threshold to 256
3.Support fragment for LR mode
4.Fix ampdu duration issue
5.Fix rx fragment fail in Open mode.
1.bringup c3 v1.1 and sync func to c3 eco7 rom
2.support to set null&probe lifetime
3.support to adjust listen interval to dtim period
4.support tx pkt w/o wake null
5.allow to tx null0 if requtest to rx data
- Fixes issue wheere beacon timeout would get triggerred multiple times
leading to a m f probe req.
- Fix missing PMKSA flush scenarios.
- Fix wrong AID assigned to station when multiple stations try to connect
simultaneously with mixed order of auth-request and assoc-request frames.
* All components which won't build (yet) on Linux are excluded.
This enables switching to Linux in an application without
explicitly setting COMPONENTS to main in the main
CMakeLists.txt.
* ESP Timer provides headers for Linux now
* automatically disabling LWIP in Kconfig if it is not available
doc(linux): brought section
"Component Linux/Mock Support Overview" up to date
