Commit Graph

2998 Commits

Author SHA1 Message Date
Angus Gratton
8352e7e9ec unit test: Measure test wall time with CCOUNT, so it includes time w/ interrupts off 2017-03-22 15:35:54 +08:00
Angus Gratton
5f3b9876b8 idf_monitor: Fix issues using Ctrl-F/Ctrl-A/gdb with older pyserial
Previously error was "AttributeError: 'Console' object has no attribute 'cancel'"
2017-03-21 16:08:06 +08:00
Angus Gratton
e477ce93e9 idf_monitor: Small fixes (baud rate, EOL, /dev/tty.X on macOS, Ctrl-T on failure)
* "make monitor" not passed the configured baud rate
  Closes #436 https://github.com/espressif/esp-idf/issues/436
* Pass toolchain prefix from sdkconfig into monitor tool
* Allow setting EOL in idf_monitor.py, use CRLF by default
* Detect if /dev/tty.X is used on macOS, warn and replace with /dev/cu.X
* If a build fails or gdb exits, ignore Ctrl-T (allowing Ctrl-T Ctrl-A/F to be same key sequence everywhere)
* Add a note about winpty on Windows
  Ref 02fdf8271d (commitcomment-21369196)
2017-03-21 16:00:32 +08:00
Angus Gratton
02fdf8271d Merge branch 'feature/idf_monitor' into 'master'
Expand  'make monitor' support

New 'make monitor' idf_monitor tool for better monitor output. Running 'make monitor' will now:
* Automatically look up code addresses via addr2line and print function, source file, line number in terminal.
* Can reset the ESP32 by typing Ctrl-T Ctrl-R.
* Can run "make flash" by typing Ctrl-T Ctrl-F.
* Can run "make app-flash" by typing Ctrl-T Ctrl-A.
* If gdb stub starts, monitor will automatically run gdb and connect. When gdb exits, ESP32 resets and monitor resumes.
* Exit is still Ctrl-[

Have some more features I'd like to add (log output to file, crash dump support) but I think this is at the point of being useful.


See merge request !565
2017-03-15 10:41:08 +08:00
Angus Gratton
2156408d45 Merge branch 'feature/aws_iot_sdk' into 'master'
Amazon AWS IoT SDK

Amazon IoT SDK component, plus two examples derived from their Linux samples.


See merge request !132
2017-03-14 10:21:08 +08:00
Angus Gratton
da660b234c AWS IoT Device SDK Support
Use device cert/key embedded in firmware, or loaded from filesystem.
2017-03-13 17:23:29 +08:00
antti
1e2c5cc151 fix unit test app to print tests in the same order they are given in files 2017-03-13 12:06:49 +08:00
Angus Gratton
1544544f8a tools: New idf_monitor 'make monitor' tool for smarter monitor output 2017-03-13 09:31:45 +08:00
Angus Gratton
fd8703bd2a Merge branch 'bugfix/unit_test_parser_only_dirs' into 'master'
unit tests: Make UnitTestParser ignore non-directories inside 'components' dirs

Tiny fix to UnitTestParser script behaviour, if you happen to have any stray files in your "components" directories.

See merge request !561
2017-03-09 06:58:02 +08:00
Angus Gratton
e014d268fe unit tests: Make UnitTestParser ignore non-directories inside 'components' dirs 2017-03-07 10:16:52 +11:00
Ivan Grokhotkov
66552c228c unit-test-app: default to 4MB flash 2017-03-04 14:56:41 +08:00
Ivan Grokhotkov
8911e666a0 Merge branch 'feature/docs_partition_ota_flash' into 'master'
Partition/SPI/OTA docs & OTA new functionality

* Update partition, SPI flash & OTA docs to reflect functionality changes
* Refactor OTA implementation to perform checks mentioned in API doc
* Add new functions to OTA API: esp_ota_get_running_partition() & esp_ota_get_next_update_partition() functions
* Add spi_flash_cache2phys() & spi_flash_phys2cache() functions to support esp_ota_get_running_partition()


See merge request !513
2017-03-03 11:27:01 +08:00
Angus Gratton
f29768c404 Build system: Add new BATCH_BUILD flag to disable interactive parts of the build
Mostly useful for Eclipse (where accidentally running interactive
config hangs the build), but also good for CI and other automated
build systems.
2017-02-22 11:59:37 +11:00
Angus Gratton
c0f155f6ff kconfig: Ignore Windows host-compiled executables 2017-02-22 11:59:37 +11:00
Angus Gratton
8dede8f8a4 Eclipse: Process Windows paths correctly using cygpath
Includes splitting the Windows Eclipse setup doc into a separate page,
as it has so many additional steps.

Addresses github #17 and #166
https://github.com/espressif/esp-idf/issues/17
https://github.com/espressif/esp-idf/issues/166
2017-02-22 11:59:37 +11:00
Angus Gratton
d28ee9a25e build system: Account for Windows behaviour of make wildcard for some dirs
See github #166
2017-02-22 11:59:37 +11:00
Angus Gratton
f687725e97 unit tests: Use a unit test app partition table, configure spi_flash to use data partition 2017-02-22 10:26:04 +11:00
Angus Gratton
473f2cff51 kconfig: Remove gperf 3.1+ incompatible kconf_conf_id forward declaration
Forward declaration was unused. gperf 3.1+ changed parameter type from
'unsigned int' to 'size_t'.
2017-02-14 10:01:44 +11:00
antti
0501507d6b CI: add script for parsing unit test cases for CI from test files
Add python script that parses list of unit test cases for CI from component test folder

Modify .gitlab-ci.yml to run this script as part of build unit tests stage
2017-01-18 17:08:20 +08:00
Ivan Grokhotkov
5b2888e113 unity: fix testcase initializer for compiling with C++ 2017-01-06 14:56:02 +08:00
Jeroen Domburg
6f0a494cae Add testcase, fix executable memory allocated in shared dram/iram region 2016-12-15 15:03:22 +08:00
Angus Gratton
f1390fa7c9 Merge branch 'bugfix/conf_across_mountpoints' into 'master'
Create temp config in the same dir as target

Fixes case where SDK and app are on different mounts

(In our usage of kconfig, dirname is the empty string & basename is the full path to sdkconfig)

Github pull request https://github.com/espressif/esp-idf/pull/151


See merge request !309
2016-12-15 07:07:27 +08:00
Deomid Ryabkov
6380245d3d Create temp config in the same dir as target
Fixes case where SDK and app are on different mounts
2016-12-12 16:16:14 +00:00
Jeroen Domburg
bf57594ebe Merge branch 'feature/intr_alloc' into 'master'
Add dynamic interrupt allocation mechanism

This adds:
- Dynamic allocation of interrupts. Pass it the features of the interrupt you want, it'll set you up with an int.
- Shared interrupts. Enables multiple peripheral drivers to use the same interrupt. 
- Marking what interrupts are fully executable from IRAM; if an int isn't marked like that it will get disabled once flash cache gets disabled.

Also:
- Modifies driver to be in line with these changes

See merge request !254
2016-12-09 14:00:39 +08:00
Jeroen Domburg
cb9ef19d3b Also add intr_alloc magic to rtc code 2016-12-08 12:57:57 +08:00
Jeroen Domburg
ae8c37e0b6 Add disabling/enabling of shared interrupt, add testcase for interrupts 2016-12-08 12:39:33 +08:00
Angus Gratton
b98405f9d9 esp32: ReformatReformat panic.c (remove tabs, etc) 2016-12-07 13:25:56 -08:00
Ivan Grokhotkov
a35e4f5923 Merge branch 'feature/unit_test_app_tweaks' into 'master'
unit-test-app: Don't auto-display menu after test run finishes

Previous code would sometimes display menu multiple times, depending on UART activity.

See merge request !253
2016-12-07 10:28:19 +08:00
Angus Gratton
69df54a28c unit-test-app: Don't auto-display menu after test run finishes
Previous code sometimes menu multiple times, depending on UART activity.
2016-12-06 11:25:31 -08:00
Ivan Grokhotkov
ab3677d64c initial support for generation of ULP coprocessor code 2016-12-01 20:26:47 -08:00
Angus Gratton
a902e2a9de mbedtls tests: Add additional MPI (bignum), SHA tests 2016-11-25 19:21:49 +11:00
antti
15d96eccdb add build all unit tests in project.mk and update doc 2016-11-23 11:42:12 +08:00
antti
d390449371 add unit tests to esp-idf
rename nvs host test folder, modify .gitlab-ci.yml

remove unit-test-app build

re-format unit test files

remove extra newlines in project.mk

some refactoring for unit test part in project.mk

add build files of unit-test-app in gitignore

add README.md for unit test app

correct headings in README.md

remove files and make minor tweaks in unit test app

update .gitlab-ci.yml to use unit test app

delete unused lines in component_wrapper.mk

delete periph_i2s.h and lcd test

add text floating point in components/esp32/test/Kconfig

correct idf test build paths in .gitlab-ci.yml
2016-11-22 14:45:50 +08:00
Angus Gratton
341593f7d2 build system: Remove need for $(Q) macro in recipes, use --silent in MAKEFLAGS instead 2016-11-11 12:32:47 +11:00
Ivan Grokhotkov
c8a43508e5 Merge branch 'bugfix/osx_menuconfig_build' into 'master'
Allow OS X to build without libintl

https://github.com/espressif/esp-idf/pull/42

I have tested this with the following configurations:
- OS X with Xcode command line tools, no macports, no homebrew
- OS X with Xcode command line tools and homebrew
- OS X with Xcode IDE and macports

All three work with this change, without it the first two had issues.

See merge request !172
2016-11-07 12:55:47 +08:00
Ivan Grokhotkov
b6dd8a55cd Fix build with macports/pkgconfig, silence format string warnings on OS X
Extra space is needed in echo -n "-lncurses ", otherwise if pkg-config outputs a directory after that, it will result in "-lncurses-L/opt/local/lib" (without space).
-Wno-format-security flag is needed on macOS to silence warnings about printf(gettext("message")) constructs.
2016-11-07 12:27:53 +08:00
Sandeep Mistry
e96d4a0a32 Allow OS X to build without libintl 2016-11-03 21:40:52 +08:00
Ivan Grokhotkov
b717e44eb2 tools: add code formatter rules for Eclipse
Generated with Eclipse Neon, should work in earlier versions as well.

This file can be imported
- into the workspace via Preferences > C++ > Code Style > Formatter > Import
- or into the project via Project Preferences > C++ General > Formatter > Import

Configuration options in Eclipse are not exactly the same as in astyle.
There may be some discrepancy between the format astyle and Eclipse will produce.
If anyone notices that, please let me know.
2016-11-03 18:41:00 +08:00
Ivan Grokhotkov
6602d6b7f2 docs: add style guide
This adds initial code style guide. Only section on code formatting is written, other sections to be added later.
Also adds scripts to format code using astyle.
2016-11-03 18:41:00 +08:00
Ivan Grokhotkov
f5f625ead5 kconfig: fix build on macOS
macOS version of sed doesn't recognize \r as special character.
Replacing with \x0D substitution which works everywhere.
2016-09-20 11:31:46 +08:00
Angus Gratton
cdd1b95b6e config system: Support Windows when CRLFs used for eol markers
Includes a test in test_build_system.sh to prevent regressions w/
CRLFs in text files.

Fixes Github #10
2016-09-16 18:07:58 +10:00
Angus Gratton
7c58c1e06b Build system: Allow components to add to the global CFLAGS via Makefile.projbuild
Used by mbedTLS to set MBEDTLS_CONFIG_FILE in all components.

This change sets CFLAGS/etc at the project level and then exports those
variables for components, rather than setting them independently each time
a component Makefile is invoked.
2016-09-09 11:08:19 +10:00
Angus Gratton
3e9a76f04d eclipse_make.sh: Fix printing of make directory 2016-09-08 13:39:09 +10:00
Angus Gratton
144ebe5d53 Move bin/eclipse_windows_make.sh to tools/windows_eclipse_make.sh
Moving as bin directory is going away soon
2016-09-08 13:39:09 +10:00
Angus Gratton
f853f94335 Use IDF_PATH instead of SDK_PATH for the environment variable pointing to esp-idf
This will require a matching change in all projects using ESP-IDF.
2016-08-19 15:01:49 +08:00
Angus Gratton
9ec0e1545d Standardise remaining uses of SDK to ESP-IDF 2016-08-19 15:01:15 +08:00
Angus Gratton
9e0c80688b Fix gen_esp32part.py locations & documentation (thanks @wujiangang\!) 2016-08-18 21:42:37 +08:00
Ivan Grokhotkov
bd6ea4393c Initial public version 2016-08-17 23:08:22 +08:00