Warn if IDF_PYTHON_ENV_PATH set to a suspicious path with
different ESP-IDF version and/or Python version.
Fail if the virtual environment was created for a different ESP-IDF
version.
Closes https://github.com/espressif/esp-idf/issues/13196
According to the application note in SD Card Physical Specification:
> The host shall set ACMD41 timeout more than 1 second to abort repeat
of issuing ACMD41 when the card does not indicate ready. The timeout
count starts from the first ACMD41 which is set voltage window
in the argument.
Previously, the timeout was exactly one second, and this caused
certain larger-capacity cards to "time out", because they couldn't
finish initialization process in time.
ACMD41 argument is different between SD mode and SPI mode.
In SPI mode, the only non-zero bit may be the HCS bit. Unlike the SD
mode, the bits reflecting the host's OCR should be zero.
Previously, we used to set these bits the same way as for the SD mode.
This has caused certain cards to fail initializing, apparently their
controllers have checked the ACMD41 argument more strictly and refused
to finish initialization, resulting in an error such as
sdmmc_common: sdmmc_init_ocr: send_op_cond (1) returned 0x107
(Note that this error may have other causes than the one fixed in
this commit. For example, if the card doesn't have a sufficient and
stable power supply, it may also fail to complete the internal
initialization process, and will never clear the busy flag in R1
response.)
Closes https://github.com/espressif/esp-idf/issues/6686
Closes https://github.com/espressif/esp-idf/issues/10542
Without this include it fails to compile with this error:
```
esp/esp-idf-v5.2/components/esp_rom/include/esp32/rom/uart.h:262:32: error: implicit declaration of function 'UART_STATUS_REG' [-Werror=implicit-function-declaration]
262 | status = READ_PERI_REG(UART_STATUS_REG(uart_no));
```
Merges https://github.com/espressif/esp-idf/pull/13025
- The ROM text and data sections share the address range
(see SOC_I/DROM_MASK_LOW - SOC_I/DROM_MASK_HIGH).
- Initially, we had two PMP entries for this address range - one marking the
region as RX and the other as R.
- However, the latter entry is redundant as the former locks the PMP settings.
- We can divide the ROM region into text and data sections later when we
define boundaries marking these regions from the ROM.
The issue is `esp_flash_write_encryped` function in ROM on ESP32C3, ESP32S3
calls legacy implementation, which uses old configuration. And this causes
write fails.
The solution in this commit is to compile and link this function(and related)
in IRAM instead of the ROM one.
The IRAM cost increases around 1.2KB after the fix
This commit fixes the following build issues when CONFIG_ESP_CONSOLE_NONE is
enabled:
- esp_console_repl.c will have 'defined but unused' warnings on various console
functions.
- esp_console_repl.c does not use "TAG" when CONFIG_ESP_CONSOLE_NONE is
enabled, leading to a "defined by not used" warning.
Closes https://github.com/espressif/esp-idf/issues/12984
This commit fixes a bug where if multiple concurrent USBH API calls trigger
multiple events on the same device, some events will be lost. As a result,
those lost events don't get processed by the subsequent usbh_process() call.
- Even if the config MBEDTLS_HARDWARE_AES is enabled, we now support fallback
to software implementation of GCM operations when non-AES ciphers are used.
All the log messages of espcoredump component used to be in DRAM, which would
lower the available RAM space for the user application. Since the cache is always
enabled after an exception, constants can be put in flash.
1. fix(wifi/mesh): wait for child disconnect when mesh deinit
2. fix(wifi): fix wifi stop cost too much time
3. fix(clk): clear all lpclk source at clk init
4. fix(wifi): fixed scan and home channel change issues
5. fix(wifi):fix issues that in mplen clear and esp_wifi_set_mode
6. fix(wifi): fix qos encapsulated eapol issue
7. fix(wifi): fixed dhcp offer and dhcp ack data rates
8. fix(wifi): fix lmac_stop_hw_txq issue
