* Migrate test cases from IDF test runner to Unity fixture.
* Tighten heap checks in the test case a bit.
* Run formatting script on test_wl.c
* NEW: Define 4 test configurations, including configs with 512 byte
sector size. Previously these configs weren't tested in CI.
* NEW: The test app only runs for ESP32 and ESP32-C3 (one chip for
each architecture). The component is pretty high level so we don't
need to test it for each chip. This reduces the load on CI.
This commit fixes how the USB Host HCD handles sudden disconnections.
Bugs:
- HW channels remain active when the port suddenly disconnects, and
previously the channel would be disabled by setting the disabled bit,
then waiting for a disabled interrupt. However, ISOC channels do not
generate the disabled interrupt when the port is invalid, thus leading
to tasks getting indefinitely blocked in hcd_pipe_command().
Fix:
On a sudden disconnection, forcibly treat all channels as halted even
if their HCCHAR.ChEna bit is still set. We do a soft reset after a port
error anyways, so the channels will eventually be reset.
Closes https://github.com/espressif/esp-idf/issues/7505
This commit addes the 8/16 bit register field access workarounds to
the DWC_OTG peripheral. This workaround was applied to all other
peripherals in commit 874a720286.
During the early start, the virtual eFuse mode can call erase operations when OS is not yet running.
Possible workaround: CONFIG_SPI_FLASH_YIELD_DURING_ERASE=n
Fixed for the legacy flash driver as well.
usb_serial_jtag: Add secondary menu to support using usb_serial port to print when primary is uart
Closes IDF-3525 and IDF-3555
See merge request espressif/esp-idf!14554
FATFS provides a disk status and disk initialize callback which were not
implemented. Implementation has very low impact on SD/MMC speed and
fixes issues, when trying to open file when SD card was removed from
slot and not deinited.
If disk_status returns STA_NOINIT, it will always continue with
disk_initialize. If that returns 0, it will continue like everything is
working normally. So there has to be the same check as in disk_status.
Return of disk_initialize is always checked like this for STA_NOINIT or
STA_PROTECT so if command fails, we return the STA_NOINIT.
stat = disk_initialize(pdrv);
if (stat & STA_NOINIT) return FR_NOT_READY;
if (stat & STA_PROTECT) return FR_WRITE_PROTECTED;
Closes IDF-4125
esp_restart()/panic_restart() never resets the Digital system (so far required only by the Memprot feature) as there's a typo in the corresponding #define:
it checks CONFIG_ESP_SYSTEM_CONFIG_MEMPROT_FEATURE instead of CONFIG_ESP_SYSTEM_MEMPROT_FEATURE.
Issue fixed.
IDF-4094
The following changes have been made:
1. All FreeRTOS kernel source files are now placed in the
freertos/FreeRTOS-Kernel folder to match with the upstream folder structure.
2. All kernel include files are now placed in freertos/FreeRTOS-Kernel/include.
3. All port files are now placed in freertos/FreeRTOS-Kernel/portable.
4. All additions/customizations are placed in freertos/esp_additions.
5. All other miscellaneous files (README, License files etc.) are moved to
freertos/FreeRTOS-Kernel folder to match with the upstream.
6. Updated esp-cryptoauthlib to latest commit to resolve FreeRTOS
include dependencies.
Signed-off-by: Sudeep Mohanty <sudeep.mohanty@espressif.com>
This commit fixes a bug in no-split and allow-split ring buffers free buffer size calculation.
When the free size available in the buffers less than the size of one item header,
the function prvGetCurMaxSizeNoSplit/AllowSplit() incorrectly returned the maxItemSize instead of 0.
This is due to the comparision between a negative and a positive value
where both operands are treated as unsigned during the comparision operation,
thereby treating the negative operand as a large integer.
Also added new unit tests to test buffer-full and almost-full conditions
where this scenario is likely to be hit.
Closes https://github.com/espressif/esp-idf/issues/7344
Closes https://github.com/espressif/esp-idf/pull/7371
The release of the semaphore indicating the item was successfully sent must be the last semaphore released. The receiver may be in another task and may delete the Ringbuffer (such as with a return code across tasks design pattern) if they are through with the Ringbuffer.
The function xRingbufferSendAcquire followed by xRingbufferSendComplete had the semaphores released in the proper order and that same pattern should have been used in xRingbufferSend and xRingbufferSendFromISR. This commit fixes this order.
Issue (IDFGH-6030) #7716 describes the problem in more detail.
Closes IDFGH-6030, https://github.com/espressif/esp-idf/issues/7716
Closes IDFGH-6036, https://github.com/espressif/esp-idf/pull/7721
0 is a valid socket description, so should be accepted after we create a
socket. In IDF, though, it's just a theoretical issue, as customers have
to configure:
* FD_SETSIZE = CONFIG_LWIP_MAX_SOCKETS (from makefiles)
* CONFIG_VFS_SUPPORT_IO = n (from menuconfig)
(this configuration is currently broken, but if we adjust the IDF here
and there we could reproduce the issue)
