https_server: Added WSS server example and some http(s)+ws updates
Closes IDFGH-3822, IDFGH-3668, IDFGH-3766, and IDFGH-3444
See merge request espressif/esp-idf!10262
To be in line with other interfaces, when deleting the driver and it's glue layer to esp-netif, we DO NOT delete the related esp-netif (since is was allocated and created outside of the glue code and it works the same way in esp-eth and esp-wifi driver/glue layers).
Closes https://github.com/espressif/esp-idf/issues/5486
Add TCP port files to provide Modbus TCP interface for communication
Add freemodbus add tcp support for common master/slave iface and tcp example based on socket API
The communication between master and slave checked for each example serial_master, serial_slave (use ModbusPoll TCP)
update tcp example according netif changes, fix ci issues
update TCP slave implementation
update example_test.py to to set IP through stdin
update API documentation
event bit instead of semahore to lock communication resource
update default options and master/slave port files
Closes https://github.com/espressif/esp-idf/issues/858
Closes IDF-452
By default it uses simple client connecting to https address. It is
possible to configure both server and client. As for example test the
configuration of both server and client connecting to each other on
Reuses most of the code from BG96. At this moment, this is not a
perfect support for other modules as the generic handlers for most
common modem functionality is not easily reusable. Refactoring to a
fully independent modem component will solve this.
Closes https://github.com/espressif/esp-idf/issues/5250
Add logic to set `FIN` flag automatically for transmitted WS frames, but
if `fragmented` option set indicating an expert/manual mode, then the
`FIN` flag is set according to the `final` option.
esp-modem netif glue layer implements esp-netif attach callback to setup corresponding driver functions and start the modem. The error code of esp_modem_start_ppp() was ignored and ESP_OK returned in all cases. Fixed by passing esp_modem_start_ppp()'s error code to post_attach callback.
Closes https://github.com/espressif/esp-idf/issues/5430
CoAP component relies on some mbedTLS crypto configuration
options, e.g. DTLS and PSK. These configuration options if
selected, have footprint impact on generic TLS examples like
https_request or https_ota as well.
Footprint of https_request example with/without change is per below:
$ ./tools/idf_size.py new_https_request.map --diff old_https_request.map
<CURRENT> MAP file: new_https_request.map
<REFERENCE> MAP file: old_https_request.map
Difference is counted as <CURRENT> - <REFERENCE>, i.e. a positive number means that <CURRENT> is larger.
Total sizes of <CURRENT>: <REFERENCE> Difference
DRAM .data size: 14796 bytes 14796
DRAM .bss size: 23560 bytes 23680 -120
Used static DRAM: 38356 bytes ( 142380 available, 21.2% used) 38476 -120 ( +120 available, +0 total)
Used static IRAM: 89045 bytes ( 42027 available, 67.9% used) 89045 ( +0 available, +0 total)
Flash code: 554231 bytes 563823 -9592
Flash rodata: 179000 bytes 181224 -2224
Total image size:~ 860632 bytes (.bin may be padded larger) 872568 -11936
This commit moves relevant config options to CoAP specific examples
and also adds some run time warnings if they are kept disabled.
Closes https://github.com/espressif/esp-idf/issues/5262
The interface name can be used in socket API, i.e. setsockopt(). The API esp_netif_get_netif_impl_name() shoudl be used to populate standard
interface structure struct ifreq.
If mdns answer hasn't been received within timeout, Value error would be raised, but the mdns-server-thread would still run, blocking CI jobs. Fixed by moving the raise statement within try-finally block
dut.expect() returns groups of a matching regex, but could be truncated upon reading/buffering. fixed by forcing expect to acquire exactly 8 octets of IPv6 address, i.e. not supporting short-handed entries such as fe80::0000..
Also remove event_queue_size from esp_modem_dte_t because
event_queue_size is only used in esp_modem_dte_init.
Fixes: 817c0e3019 ("esp_modem: UART runtime configuration of esp-modem")
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Basic set of configuration related to UART moved from KConfig
to runtime configuration structure to simplify reusing the component for
testing and examples.
Fixes Guru Meditation Error: Core 0 panic'ed (LoadProhibited) when config with
CONFIG_PM_ENABLE=y && CONFIG_PM_DFS_INIT_AUTO=y.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Merges https://github.com/espressif/esp-idf/pull/4904
pppos_client example used the UART default clock configuration which might
cause issues if power management enabled. Settings updated to UART_SCLK_REF_TICK
Also need to explicitly disable RX interrupts in UART pattern detection
mode.
Closes https://github.com/espressif/esp-idf/issues/4801
Since the recent refactoring of spi bus_lock comonent introduced heavy logging under debug/verbose level of verbosity, the http-server test executed in the CI became less stable due to complicated regex. Fixed by removing the first optional group
check master read write functions with array of registers)
fix master serial processing code and modbus controller to work with register array
modbus_master: add reading and writing of test value array (58 registers) to check failure is gone
remove parameter temporary buffer from modbus controller to allow more than 24 byte writes
driver: fix issue with TOUT feature
driver: fix uart_rx_timeout issue
driver: fix issue with rxfifo_tout_int_raw not triggered when received fifo_len = 120 byte and all bytes read out of fifo as result of rxfifo_full_int_raw
driver: add function uart_internal_set_always_rx_timeout() to always handle tout interrupt
examples: call uart_internal_set_always_rx_timeout() to handle tout interrupt correctly
examples: update examples to use tout feature
driver: reflect changes of uart_set_always_rx_timeout() function, change uart.c
driver: change conditions to trigger workaround for tout feature in uart.c
driver: change uart_set_always_rx_timeout()
freemodbus: fix tabs, remove commented code
driver: remove uart_ll_is_rx_idle()
Fix below build error:
../main/udp_client.c: In function 'udp_client_task':
../main/udp_client.c:58:41: error: 'addr_str' undeclared (first use in this function); did you mean 'caddr_t'?
Fixes: 995ef85e85 ("socket examples: add tests for server and client applications")
Signed-off-by: Axel Lin <axel.lin@gmail.com>
tout_thr - move calculation and masking into hal layer update driver and uart_ll (add uart_ll_set_rx_tout)
move tout calculation into uart_ll
move calculation of time out in bit time for esp32s2 into low level uart_ll.h file
move uart_hal_get_symb_len() into hal
update set_rx_timeout() to warn user about incorrect value
update HAL, LL 1
fix uart_xx_set_rx_tout() to convert symbol time into bit time
update param description
update tout calculation in LL
update uart_hal_get_max_rx_timeout_thrd() and uart_ll_get_max_rx_timeout_thrd()
Implementation of `esp_tls_conn_new_sync` now uses timeout_ms value to
give up retries.
Specified this value to be 10 sec. (10 * 1000 ms).
Signed-off-by: Vikram Dattu <vikram.dattu@espressif.com>
Use buffer to accumulate data of response from event handler and print the response on console
Demonstrate use of user_data field in esp_http_client_config_t to get response body
calling esp_netif_up() and esp_netif_down() was not supported if the
underlying netif wos of ppp type. Updated the code to enable setting
these interfaces up/down and registered actions in moden_netif glue for
connection/disconnection events to set the netif up/down.