Commit Graph

28 Commits

Author SHA1 Message Date
morris
2fb43820c2 driver_ng: implement new rmt driver
The legacy driver can't handle the breaking change between esp chips

very well.

And it's not elegant to extend new feature like DMA, ETM.

The new driver can return a opaque handle for each RMT channel.

An obvious transaction concept was also introduced.

TX and RX functionalities are splited out.
2022-05-07 10:34:50 +00:00
morris
5bfe873725 driver: deprecate legacy rmt driver
The legacy driver is still available, but new feature won't be added.
Enable RMT_SUPPRESS_DEPRECATE_WARN if you don't want to see the
deprecated warnings.
2022-05-07 10:34:50 +00:00
Song Ruo Jing
e13bb580c7 Merge branch 'refactor/gpio_unit_test' into 'master'
gpio: Clean up unit tests and enable ci ut on some previously disabled test cases

Closes IDF-4620

See merge request espressif/esp-idf!17417
2022-04-01 18:38:19 +08:00
songruojing
8d84033b8c gpio: Clean up unit tests and enable ci ut on some previously disabled test cases
Eliminate UT_T1_GPIO runner requirement by routing internally through gpio matrix and by setting gpio pins to GPIO_MODE_INPUT_OUTPUT mode for all interrupt related test cases.
2022-03-30 15:11:08 +08:00
morris
29e9b5b46a hw_support: move periph_ctrl from driver to hw_support 2022-03-29 11:53:31 +08:00
morris
21e29f285f temp_sensor: avoid coexistence of new and legacy driver 2022-03-08 11:57:53 +08:00
Cao Sen Miao
441900caa2 Temperature_sensor: keep legacy drivers 2022-03-04 17:59:07 +08:00
morris
ec8defaa96 pulse_cnt: new driver for PCNT peripheral 2022-03-03 22:38:32 +08:00
Darian Leung
2f2df82bc5 twai: Enable ESP32 errata workarounds by default 2022-02-23 20:22:02 +08:00
Ivan Grokhotkov
355b501126 driver: show TWAI config menu only if TWAI is supported 2022-01-20 22:23:45 +01:00
morris
5deb83b12d gptimer: new driver for previous timer group 2022-01-07 14:44:50 +08:00
morris
d8f2eaf94e gpio: remove legacy rtc_io description for esp32 2022-01-06 21:43:12 +08:00
morris
83d16aa00c gdma: support IRAM interrupt 2021-11-08 16:14:51 +08:00
SalimTerryLi
e67bcda6d1
mcpwm: ISR can be placed to IRAM by menuconfig
resolves https://github.com/espressif/esp-idf/issues/7449
2021-08-26 15:58:46 +08:00
Darian Leung
2f58060921 TWAI: FIFO overrun handling and errata workarounds
This commit adds handling for FIFO overruns and
adds workarounds for HW errats on the ESP32.

Closes https://github.com/espressif/esp-idf/issues/2519
Closes https://github.com/espressif/esp-idf/issues/4276
2021-03-30 14:17:31 +08:00
ninh
27aa6c289f components/pm: Add slp gpio configure workaround 2021-01-15 15:34:45 +08:00
Ivan Grokhotkov
7f3b16a99d freertos: always enable static allocation
to use it for newlib locks
2020-12-29 16:18:04 +01:00
Darian Leung
4c57f50fe4 TWAI: ISR runs when cache is disabled
This commit adds the feature where the TWAI ISR will continue to
run even if the cache is disabled. Whilst cache is disabled, any
received messages will go into the RX queue, and any pending TX
messages in the TX queue will be transmitted. This feature should
be enabled using the CONFIG_TWAI_ISR_IN_IRAM option.
2020-10-10 14:19:32 +08:00
Roland Dobai
5454c268f7 Docs: Omit kconfig configurations not available for the target 2020-01-30 10:30:06 +01:00
fuzhibo
0c2bf7c8bc rtcio: add hal for driver 2019-11-21 10:40:49 +08:00
suda-morris
f94711c316 uart: add option to put ISR in IRAM 2019-10-02 16:43:02 +00:00
Roland Dobai
e9f1011b1b Rename Kconfig options (components/driver) 2019-05-21 09:09:01 +02:00
Roland Dobai
37126d3451 Correct Kconfigs according to the coding style 2019-01-29 13:37:01 +01:00
Michael (XIAO Xufeng)
8cddfa35b8 spi: fix the crash when callbacks are not in the IRAM
Introduced in 9c23b8e5 and 4f87a62f. To get higher speed, menuconfig
options are added to put ISR and other functions into the IRAM.  The
interrupt flag ESP_INTR_FLAG_IRAM is also mistakenly set when the ISR is
put into the IRAM. However callbacks, which are wrote by the user, are
called in the master and slave ISR. The user may not be aware of that
these callbacks are not disabled during flash operations. Any cache miss
during flash operation will cause panic.

Essentially IRAM functions and intrrupt flag ESP_INTR_FLAG_IRAM are
different, the latter means not disabling the ISR during flash
operations.  New bus_config flag intr_flags is offered to help set the
interrupt attribute, including priority level, SHARED, IRAM (not
disabled during flash operations).  It introduced a small BREAK to
IDFv3.1 (but the same as IDFv3.0) that the user has to manually set IRAM
flag now (therefore he's aware of the IRAM thing) to void the ISR being
disabled during flash operations.
2018-11-20 13:07:13 +08:00
Michael (XIAO Xufeng)
4f87a62f18 spi_slave: add new menuconfig item to decide whether spi slave should be put into IRAM 2018-08-23 05:21:49 +00:00
Michael (XIAO Xufeng)
9c23b8e596 feature(spi_master): allow to place functions into IRAM to get higher efficiency 2018-06-14 20:22:40 +08:00
Michael (Xiao Xufeng)
cef8baf424 bugfix(rtc): make sure peripherals (DAC, HALL) are turned off before conversion.
refactor structure of ``rtc_module.c`` to make it more clearly.

Closes https://github.com/espressif/esp-idf/issues/1517
2018-03-28 17:10:01 +08:00
michael
28e832c37e fix(adc2): fix cct and xpd configurations to improve precision of ADCs 2018-03-26 12:02:26 +00:00