- GCM operation in mbedtls used ECB, which calculated only 16 bytes of data each time.
- Therefore, when processing a large amount of data, it is necessary to frequently set hardware acceleration calculations,
- which could not make good use of the AES DMA function to improve efficiency.
- Hence, GCM implementation is replaced with CTR-based calculation which utilizes AES DMA to improve efficiency.
All the partition handling API functions and data-types were moved from the 'spi_flash' component to the new one named 'esp_partition'. See Storage 5.x migration guide for more details
This fix adds a workaround to disable compiler optimization flag "-ftree-loop-distribute-patterns"
for `mpi_to_mem_block` routine. It was observed that compiler with release configuration was falling
back to `memset` call from ROM library causing an issue in correctly zero initializing MPI peripheral
block.
Please see following linked issue for more discussion and context on this issue.
Closes https://github.com/espressif/esp-idf/issues/8710
Closes https://github.com/espressif/esp-idf/issues/9371
Closes https://github.com/espressif/esp-idf/issues/9256
Closes IDFGH-7102
Closes IDFGH-7842
Closes IDFGH-7714
Closes IDFCI-1452
Closes IDF-6029
Before `test_apps` migration, we had an independent release config,
but we can safely enable it in the default configuration for ESP32
target itself. This helps to catch any potential issues that may
occur in relevant tests because of compiler optimization flags.
- While checking if ciphersuite uses RSA key exchange methods,
the APIs `mbedtls_ssl_get_ciphersuite_id_from_ssl` and
`mbedtls_ssl_ciphersuite_from_id` were used to get the ciphersuite
info.
- However, this is incorrect as we need the ciphersuite info from the
handshake instance and not the ssl_session instance.
ESP32-C2 has a single group timer, thus it will use it for the interrupt watchdog,
which is more critical than the task watchdog. The latter is implement in
software thanks to the `esp_timer`component.
This function removes the following legacy atomic CAS functions:
From compare_set.h (file removed):
- compare_and_set_native()
- compare_and_set_extram()
From portmacro.h
- uxPortCompareSet()
- uxPortCompareSetExtram()
Users should call esp_cpu_compare_and_set() instead as this function hides the details
of atomic CAS on internal and external RAM addresses.
Due to the removal of compare_set.h, some missing header includes are also fixed in this commit.
After refactoring the target components (e.g. esp32) no longer contained any real functionality.
What remained in these components have been moved elsewhere and the component itself deleted from the
build system.
This commit does the following:
- Update existing unit tests that use the TWDT to call the new
esp_task_wdt_init() API
- Add a set of dedicate TWDT unit tests
- Updates the TWDT example
lwip was added to common requirements list to provide "sys/socket.h"
header to all components without additional requirements specified.
However, lwip pulls in a lot of dependencies on other components.
This commit removes lwip from common requirements to reduce the number
of components in G1-only apps.
To compensate for this removal, the following changes are made:
- newlib (which is a common requirement) has a public dependency on
lwip if lwip is present in the build. This ensures that sys/socket.h
is available as long as lwip component is included into the build.
- lwip is now a public requirement of esp-tls since esp_tls.h includes
sys/socket.h header.
- lwip is now a public requirement o esp_http_client because
sys/socket.h is included from esp_http_client.h
- lwip is now a private requirement of esp_wifi for "smartconfig_ack"
- lwip is now a private requirement of mqtt for socket functions
- lwip is now a public requirement of tcp_transport because
esp_transport_tcp.h includes sys/socket.h header.
- mbedtls checks if lwip component is present in the build. If yes,
net_sockets.c is added to the build, along with the dependency on
lwip. Previously lwip was a public requirement of mbedtls
unconditionally.
system/g1_components test app is updated to reflect the changes
Default public dependencies of a component before and after this
change, except common requirements:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
- vfs (public dependency of lwip)
- esp_wifi (public dependency of lwip)
- esp_event (public dependency of esp_wifi)
- esp_netif (public dependency of esp_event)
- esp_eth (public dependency of esp_netif)
- esp_phy (public dependency of esp_wifi)
After:
- esp_timer (public dependency of freertos)
- bootloader_support (public dependency of esp_hw_support)
Altogether, the following components have been always added as
public requirements to all other components, and are not added now
([breaking-change]):
- lwip
- vfs
- esp_wifi
- esp_event
- esp_netif
- esp_eth
- esp_phy
Application components now need to explicitly declare dependencies on
these components.
Some components were including esp_timer.h without declaring a
dependency on esp_timer component. This used to work due to a
transitive public dependency on esp_timer from freertos component.
Add explicit dependencies where needed.
Also some source files were using esp_timer functions without
including the header file. This used to work because esp_timer.h was
included from freertos port header file. This commit adds esp_timer.h
includes where needed.
The "mbedtls_rsa_private" has made f_rng function mandatory for the
operation.
Also updated the MAX_PERFORMANCE values with offset added with blinding
Added the SOC_CCOMP_TIMER_SUPPORTED Check
Purpose:
This will allow for easily automating periodic updates to
"cacrt_all.pem" file.
Note:
For now newly created "cacrt_local.pem" contains single "DST Root CA X3"
which we are keeping to manage compatibility with endpoints like
"howsmyssl.com". Please note this Root CA is expired and is not part of
Mozilla’s NSS root certificate store.
- Resulted in a crash in the handshake stage when
used alongside TLS 1.3 (MBEDTLS_SSL_PROTO_TLS1_3)
- Fix build error when MBEDTLS_HARDWARE_SHA=n &&
MBEDTLS_DYNAMIC_BUFFER=y
- Fix build error when TLS 1.3 is enabled with
MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=n
This commit updates the visibility of various header files and cleans up
some unnecessary inclusions. Also, this commit removes certain header
include paths which were maintained for backward compatibility.
When GEN_FILES is enabled, Perl interpreter should be available. There
is a check in mbedTLS that disables GEN_FILES on Windows (where Perl
is not available by default) but it is broken for recent CMake
versions.
Also set Python interpreter to the one IDF uses, just to avoid calling
into some other Python version which CMake might manage to find.
- Kconfig: Enabled MBEDTLS_HKDF_C by default when TLS 1.3 support is enabled
- esp-tls (mbedtls): Forced client to use TLS 1.3 when TLS 1.3 support is enabled
