This commit fixes an issue where in the FreeRTOS port layer would cause
the portASSERT_IF_IN_ISR() assert check to fail even when the system is
not in an interrupt context.
This commit deprecates the "freertos/xtensa_context.h" and "xtensa/xtensa_context.h"
include paths. Users should use "xtensa_context.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_api.h"
- Add warning to compatibility header
This commit deprecates the "freertos/xtensa_api.h" and "xtensa/xtensa_api.h"
include paths. Users should use "xtensa_api.h" instead.
- Replace legacy include paths
- Removed some unnecessary includes of "xtensa_api.h"
- Replaced some calls with "esp_cpu_..." equivalents
- Add warning to compatibility header
This commit mainly targets the ESP32-P4. It adds supports for coprocessors on
RISC-V based targets. The coprocessor save area, describing the used coprocessors
is stored at the end of the stack of each task (highest address) whereas each
coprocessor save area is allocated at the beginning of the task (lowest address).
The context of each coprocessor is saved lazily, by the task that want to use it.
- Move vTaskStartSchedulerOtherCores()
- implementation to freertos_tasks_c_additions.h
- declaration to freertos_idf_additions_priv.h as API is private
- Rename vTaskStartSchedulerOtherCores() -> prvStartSchedulerOtherCores() to
indicate that the function is private.
This commit adds an implicit inclusion of `idf_additions.h` to `FreeRTOS.h` in
preparation for moving some IDf specific API to `idf_additions.h`.
This implict inclusion allows existing code to be continue using these
relocated APIs without any changes in header inclusions.
Also removed "#pragma once" directive from "freertos_tasks_c_additions.h" since
that header is included as a source file.
Previously, if CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP was enabled, users
would provide a definition for a vPortCleanUpTCB() hook function that is called
right before a task's memory is freed in prvDeleteTCB(). However,
vPortCleanUpTCB() will be reclaimed by ESP-IDF for internal use in v6.0.
This commit introduces the following changes...
Introduced a new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option:
- Provides the same pre-deletion hook functionality. But users now define
vTaskPreDeletionHook() instead.
- CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP still exists, but is marked as
deprecated. This is to maintain compatibility with existing applications
that already define vPortCleanUpTCB().
- Removed redundant --wl --wrap workaround with vPortCleanUpTCB()
- Added todo notes to remove support for user defined vPortCleanUpTCB()
completely in v6.0.
- Updated test cases to use new CONFIG_FREERTOS_TASK_PRE_DELETION_HOOK option
Freed up portCLEAN_UP_TCB() to call a new internal vPortTCBPreDeleteHook():
- vPortTCBPreDeleteHook() now replaces the previous "wrapped" implementation
of vPortCleanUpTCB().
- vPortTCBPreDeleteHook() is an internal task pre-delete hook for IDF FreeRTOS
ports to inject some pre-deletion operations.
- Internal pre-delete hook now invokes user provided vTaskPreDeletionHook()
if enabled.
- Relocated vPortTCBPreDeleteHook() to correct section in port.c
portBASE_TYPE is an internal macro defined by the porting layer. This commit
changes all references to BaseType_t which is the official type exposed by
FreeRTOS.
portSTACK_TYPE is an internal macro defined by the porting layer. This commit
changes all references to StackType_t which is the official type exposed by
FreeRTOS.
- add hardware stack guard based on assist-debug module
- enable hardware stack guard by default
- disable hardware stack guard for freertos ci.release test
- refactor rtos_int_enter/rtos_int_exit to change SP register inside them
- fix panic_reason.h header for RISC-V
- update docs to include information about the new feature
This commit refactors the "freertos" component's structure as follows:
- "FreeRTOSConfig.h" related files moved to "./config" directory
- Refactored CMakeLists.txt file in preparation for v10.5.1 upgrade
- Grouped list appends based on component organization
- Removed some unecessarily public "include_dirs"
- Removed FreeRTOS-openocd.c
- uxTopUsedPriority has been added back to tasks.c since v10.4.2
- Thus the workaround in FreeRTOS-openocd.c is no longer needed and can
be removed.
This commit refactors port_systick.c so that all ports (RISC-V vs Xtensa) of
all FreeRTOS implementations (IDF vs Amazon SMP FreeRTOS) use the same set of
tick interrupt functions. Thus, these funcitons are now common:
- vPortSetupTimer() to setup the tick interrupt's timer
- xPortSysTickHandler() that is called on each tick interrupt
* Added a POSIX/Linux simulator that is compatible with the Amazon
FreeRTOS SMP API. Note that the simulator itself is still
single core, like the IDF FreeRTOS POSIX/Linux simulator.
The previous commit moved the OS agnostic files from the IDF FreeRTOS port to
the xtensa component, thus can be accessed by both IDF and Amazon SMP FreeRTOS.
This commit removes the redudant copies in the Amazon SMP FreeRTOS port.
When building for CONFIG_FREERTOS_SMP, "idf_additions.h" was previously
implicitly included by "task.h" so that other ESP-IDF components still have
access to IDF API additions without needing to include "idf_additions.h"
directly.
However, some FreeRTOS headers (e.g., queue.h) will include task.h before
declaring any types (e.g., QueueHandle_t). Thus if any of those types are used
in idf_additions.h, we get a missing type error.
This commit moves the implicity include of idf_additions.h to FreeRTOS.h
This commit merges the "FreeRTOSConfig_smp.h" file into the "FreeRTOSConfig.h".
The configurations for all FreeRTOS implementations are now stored in a single
file.
xTaskRemoveFromUnorderedEventList is a scheduler internal function, thus will
never be called by users. Therefore, the compatbility define is not necessary.
The default implementation of some xtensa vectors were previously moved to
"xtensa_vector_defaults.S" as weak functions so that they could be overriden.
This commit moves these default vectors back into "xtensa_vectors.S" in
preparation for further refactoring of the xtensa component.
Vanilla FreeRTOS expects applications to use one of the heap implementations
provided by FreeRTOS (i.e., heap_x.c), where functions such as pvPortMalloc()
and vPortFree() are defined in the heap implementation.
However, ESP-IDF already provides its own heap implementation
(i.e., esp_heap_caps.h). Thus, the pvPortMallc()/vPortFree() functions were
previously overriden by macro to call esp_heap functions directly.
This commit refactors the FreeRTOS port's heap as such:
- Added a heap_idf.c that implements all of the heap related functions required
by FreeRTOS source
- All dynamic memory allocated by FreeRTOS is from internal memory. Thus, the
FreeRTOS heap is the internal memory subset of the ESP-IDF heap.
- Removed some old macros to reduce diff from upstream source code.
This commit refactors the FPU handling code on the Xtensa port of Amazon SMP
FreeRTOS in the following ways:
Auto-pinning via XT_RTOS_CP_EXC_HOOK
------------------------------------
The "_xt_coproc_exc" exception would previously automatically pin a task that
uses the FPU to the current core (to ensure that we can lazy save the task's FPU
context). However, this would mean that "xtensa_vectors.S" would need to be
OS-aware (to read the task's TCB structure).
This is now refactored so that "_xt_coproc_exc" calls a CP exception hook
function ("XT_RTOS_CP_EXC_HOOK") implemented in "portasm.S", thus allowing
"xtensa_vectors.S" to remain OS agnostic.
Using macros to acquire owner spinlock
--------------------------------------
The taking and relasing of the "_xt_coproc_owner_sa_lock" is now mostly
abstracted as the "spinlock_take" and "spinlock_release" macro. As a result,
"_xt_coproc_release" and "_xt_coproc_exc" are refactored so that:
- They are closer to their upstream (original) versions
- The spinlock is only taken when building for multicore
- The spinlock held region is shortened (now only protects the instructions
that access the "_xt_coproc_owner_sa" array
Other Changes
-------------
- Updated placing and comments of various "offset_..." constants used by
portasm.S
- Update description of "get_cpsa_from_tcb" assembly macro
- Tidied up some typos in the ".S" files
This commit fixes the following FPU/Coprocessor bugs in the Xtensa port of
Amazon SMP FreeRTOS:
- vPortCleanUpCoprocArea() does not calculate the correct pointer to the
task's CPSA (located on the task's stack). This can result in
- _xt_coproc_release() not releasing the task's CP ownership
- The next coprocessor exception will write the current CP owner (i.e., the
deleted task's CPSA) leading to memory corruption
- _xt_coproc_release() writes xCoreID instead of 0 when clearing a CP owner.
This results in the next CP exception trying to load the CP owner's CPSA at
the address of "xCoreID", leading to a double exception.
This commit refactors port_common.c so that it only contains implementation of
FreeRTOS port functions that are common to all FreeRTOS ports (i.e., on all
architectures and on all FreeRTOS implementations).
This commit refactors the OS startup functions as follows:
- Moved the OS/app startup functions listed below to "app_startup.c". Their
implementations are now common to all ports (RISC-V and Xtensa) of all
FreeRTOS implementations (IDF and Amazon SMP).
- esp_startup_start_app()
- esp_startup_start_app_other_cores()
- Removed esp_startup_start_app_common() as app startup functions are now
already common to all ports.
- Added extra logs to "main_task" to help with user debugging
Note: Increased startup delay on "unity_task". The "unity_run_menu()" is non
blocking, thus if the main task or other startup tasks have not been freed
by the time "unity_run_menu()" is run, those tasks will be freed the next time
"unity_task" blocks. This could cause some tests to have a memory leak, thus
the "unity_task" startup delay has increased.
Macros that need to reteurn a value should use GCC statement expression macro
syntax. This commit fixes the portTRY_ENTER_CRITICAL() in the RISC-V port of
SMP FreeRTOS to be a statement expression macro.
The portDISABLE_INTERRUPTS() macro on Xtensa should return only the interrupt
mask/level before the interrupts were disabled. Previously, the entire contents
of PS register were returned (i.e., direct return from RSIL instruction without
any bit masking or shifting).
This commit fixes the portDISABLE_INTERRUPTS() macro to return the INTLEVEL
bitfield of the PS register.
The following changes have been made in this commit:
1. configMINIMAL_STACK_SIZE is now defined as CONFIG_FREERTOS_IDLE_TASK_STACKSIZE.
2. Removed configIDLE_TASK_STACK_SIZE config as it was redundant.
3. Updates the order of allocating the TCB and stack memory to avoid the
stack memory overriding the TCB memory when the stack grows downwards.
4. CONFIG_FREERTOS_IDLE_TASK_STACKSIZE is now incorporated into the
FreeRTOSConfig_smp.h to configure the IDLE0 stack size.
