This configuration bit is required for ADC operation as well and hence
should not be cleared in the RNG API sequence.
Ideally, the ADC driver should take care of initializing this bit but
still the RNG layer change is required because of interleaved API usage
scenario described in following linked issue.
Closes https://github.com/espressif/esp-idf/issues/14124
Closes https://github.com/espressif/esp-idf/issues/14280
This commit rewrite the 'usb_wrap_ll.h' API as follows:
- All APIs renamed from 'usb_fsls_phy_ll_...()' to 'usb_wrap_ll_...()'
- APIs now match their equivalent counter parts in 'usb_serial_jtag_ll.h'
For targets that only contain a USJ peripheral (and not a DWC OTG), their
'usb_fsls_phy_ll.h' headers only contain a single function
('usb_fsls_phy_ll_int_jtag_enable()') whose feature is already covered by
functions in 'usb_serial_jtag_ll.h'. Thus, this header is redundant.
This commit does the following:
- Remove 'usb_fsls_phy_ll.h' for targets that only contain a USJ peripheral
- Rename 'usb_fsls_phy_[hal|ll].[h|c]' to `usb_wrap_[hal|ll].[h|c]` for targets
that contain a DWC OTG peripheral. This better reflects the underlying peripheral
that the LL header accesses.
This commit renames USB PHY related HAL files from "usb_phy_xxx" to
"usb_fsls_phy_xxx" since they are only designed to support Full-Speed/Low-Speed
Serial USB PHYs. This renmaing is done to accommodate future USB PHYs that use
other PHY interfaces (e.g., UTMI, ULPI etc).
Currently, when flash encryption is enabled, the whole partition gets encrypted.
This can be optimised by encrypting only the app image instead of encrypting the whole partition.
Closes https://github.com/espressif/esp-idf/issues/12576
Fixed the value of the image_length field of the image metadata populated by esp_image_verfiy()
to include the size of the signature sector when Secure Boot V1 is enabled.
* Closes https://github.com/espressif/esp-idf/issues/12849
In former versions of ESP-IDF, the user custom memory data in the retained memory
was taken into account during the CRC calculation. This was changed in a later
commit, the custom memory was ignored, therefore this can seen as a breaking change.
This commit gives the possibility to choose between the former (legacy) or
new way of calculating the CRC.
Secure version in the image header is only available for the application
image. However, for certain security workflows, bootloader verifies
itself (own image) and hence the secure version check during that must be
avoided.
Regression introduced in recent commit-id: 3305cb4d
Tested that both secure boot and flash-enc workflows work correctly
with the anti-rollback scenario.
Some additional checks related to secure version of the application in
anti-rollback case have been added to avoid any attempts to boot lower
security version but valid application (e.g., passive partition image).
- Read secure_version under sha256 protection
- First check has been added in the bootloader to ensure correct secure
version after application verification and loading stage. This check
happens before setting up the flash cache mapping and handling over
the final control to application. This check ensures that application
was not swapped (e.g., to lower security version but valid image) just
before the load stage in bootloader.
- Second check has been added in the application startup code to ensure
that currently booting app has higher security version than the one
programmed in the eFuse for anti-rollback scenario. This will ensure
that only the legit application boots-up on the device for
anti-rollback case.
Added an API to verify the bootloader and app image before revoking the key in Secure Boot V2.
This will help in preventing the device to be bricked if the bootloader/application cannot be
verified by any other keys in efuse
On ESP32-S3 with the default efuse settings, USB PHY is connected to
the USB_SERIAL_JTAG peripheral. If USB OTG peripheral is used for the
console, we need to additionally switch the PHY to USB OTG, otherwise
we won't get any output.
Closes https://github.com/espressif/esp-idf/issues/12437
For the following configuration case:
- CONFIG_SECURE_SIGNED_APPS_RSA_SCHEME
- CONFIG_SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT
- CONFIG_SECURE_BOOT_ALLOW_SHORT_APP_PARTITION
verification of the application was failing because the externally
padded bytes were not considered in the hash (checksum) process.
This commit fixes the problem by enabling relevant code for secure OTA
without secure boot case.
Closes https://github.com/espressif/esp-idf/issues/11995
The commit fixes the case:
If variables in RTC RAM have been moved around by the linker,
they will be filled with garbage data. Any reset other than OTA would work fine
because the variables would still be initialized from the initial bootup.
So now system time will be valid even after OTA.
Closes https://github.com/espressif/esp-idf/issues/9448
* The RNG reading frequency of 200 KHz has been too high for
C6 and H2 since on these chips the RNG output is combined
with the RTC slow clock which is only 150KHz. Reduced the max
reading frequency via esp_random() from 200KHz to 62.5KHz,
which show best results in tests.
Also updated the bootloader_fill_random() max frequency to the
same value to be in line, even though it was just 83KHz.
ADDITIONAL_MAKE_CLEAN_FILES is deprecated and only worked with make.
Replaced with the new ADDITIONAL_CLEAN_FILES (CMake 3.15) which also works with ninja.
