alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

examples: re-enable system/console/advanced_usb_cdc for ESP32-S3

Browse Source 
Closes https://github.com/espressif/esp-idf/issues/9364
This commit is contained in:
Ivan Grokhotkov 2022-08-01 08:15:08 +02:00
parent 9924d9f271
commit def9dadf1e
No known key found for this signature in database
GPG Key ID: 1E050E141B280628
3 changed files with 10 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
examples/system/.build-test-rules.yml
View File

@ -18,10 +18,8 @@ examples/system/console/advanced:
reason: Sufficient to run this app on one chip with each architecture
examples/system/console/advanced_usb_cdc:
enable:
- if: IDF_TARGET == "esp32s2"
temporary: true
reason: the other targets are not tested yet
disable:
- if: SOC_USB_PERIPH_NUM == 0
examples/system/console/basic:
disable_test:

12
examples/system/console/advanced_usb_cdc/README.md
View File

@ -1,5 +1,5 @@
| Supported Targets | ESP32-S2 |
| ----------------- | -------- |
| Supported Targets | ESP32-S2 | ESP32-S3 |
| ----------------- | -------- | -------- |
# USB_OTG CDC Console Example
@ -14,7 +14,11 @@ The interactive shell implemented in this example contains a wide variety of com
### Hardware Required
This example can run on an ESP32-S2 development board, with a USB cable connected to GPIO19 and GPIO20.
This example can run on an ESP32-S2 or ESP32-S3 development board with USB port attached to the built-in USB_OTG controller.
For more details about connecting and configuring USB_OTG (including pin numbers), see the IDF Programming Guide:
* [ESP32-S2 USB_OTG](https://docs.espressif.com/projects/esp-idf/en/stable/esp32s2/api-guides/usb-otg-console.html)
* [ESP32-S3 USB_OTG](https://docs.espressif.com/projects/esp-idf/en/stable/esp32s3/api-guides/usb-otg-console.html)
### Build and Flash
@ -36,7 +40,7 @@ idf.py -p PORT flash
#### Flashing the project for the first time using USB
We can also use the ESP32-S2 built-in USB bootloader to flash the program for the first time.
We can also use the built-in USB bootloader in the ESP chip to flash the program for the first time.
1. Connect the development board using a USB breakout cable to the computer.
2. Put the chip into bootloader (download) mode, by holding "Boot" button (connected to GPIO0) and pressing "Reset" button.

3
examples/system/console/advanced_usb_cdc/sdkconfig.defaults
View File

@ -1,6 +1,3 @@
# Build for ESP32-S2 by default
CONFIG_IDF_TARGET="esp32s2"
# Enable USB console
CONFIG_ESP_CONSOLE_USB_CDC=y