feat(pm): support example deepsleep for esp32c61

This commit is contained in:
Lou Tianhao 2024-08-19 14:36:16 +08:00 committed by BOT
parent 8320e4281b
commit d70f24e414
4 changed files with 30 additions and 8 deletions

View File

@ -103,6 +103,10 @@ config SOC_LP_TIMER_SUPPORTED
bool
default y
config SOC_LP_AON_SUPPORTED
bool
default y
config SOC_CLK_TREE_SUPPORTED
bool
default y
@ -127,6 +131,10 @@ config SOC_LIGHT_SLEEP_SUPPORTED
bool
default y
config SOC_DEEP_SLEEP_SUPPORTED
bool
default y
config SOC_PM_SUPPORTED
bool
default y
@ -291,6 +299,10 @@ config SOC_GPIO_OUT_RANGE_MAX
int
default 21
config SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP
bool
default y
config SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK
int
default 0
@ -751,6 +763,14 @@ config SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH
int
default 12
config SOC_PM_SUPPORT_EXT1_WAKEUP
bool
default y
config SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN
bool
default y
config SOC_PM_SUPPORT_CPU_PD
bool
default y

View File

@ -48,7 +48,7 @@
#define SOC_APM_SUPPORTED 1 /*!< Support for APM peripheral */
#define SOC_PMU_SUPPORTED 1
#define SOC_LP_TIMER_SUPPORTED 1
// \#define SOC_LP_AON_SUPPORTED 1
#define SOC_LP_AON_SUPPORTED 1
// \#define SOC_LP_PERIPHERALS_SUPPORTED 1
#define SOC_CLK_TREE_SUPPORTED 1
// \#define SOC_ASSIST_DEBUG_SUPPORTED 1 //TODO: [ESP32C61] IDF-9269
@ -61,6 +61,7 @@
// \#define SOC_SDIO_SLAVE_SUPPORTED 0
// \#define SOC_PAU_SUPPORTED 0
#define SOC_LIGHT_SLEEP_SUPPORTED 1
#define SOC_DEEP_SLEEP_SUPPORTED 1
#define SOC_PM_SUPPORTED 1
#define SOC_ECDSA_SUPPORTED 1
#define SOC_SPIRAM_SUPPORTED 1
@ -179,7 +180,7 @@
#define SOC_GPIO_OUT_RANGE_MAX 21
// GPIO0~6 on ESP32C61 can support chip deep sleep wakeup
// \#define SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP (1) //TODO: IDF-9245
#define SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP (1) //TODO: IDF-9245
#define SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK (0ULL | BIT0 | BIT1 | BIT2 | BIT3 | BIT4 | BIT5 | BIT6)
#define SOC_GPIO_DEEP_SLEEP_WAKE_SUPPORTED_PIN_CNT (7)
@ -414,8 +415,8 @@
// #define SOC_PM_SUPPORT_WIFI_WAKEUP (1)
// #define SOC_PM_SUPPORT_BEACON_WAKEUP (1)
// #define SOC_PM_SUPPORT_BT_WAKEUP (1)
// #define SOC_PM_SUPPORT_EXT1_WAKEUP (1)
// #define SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN (1) /*!<Supports one bit per pin to configure the EXT1 trigger level */
#define SOC_PM_SUPPORT_EXT1_WAKEUP (1)
#define SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN (1) /*!<Supports one bit per pin to configure the EXT1 trigger level */
#define SOC_PM_SUPPORT_CPU_PD (1)
#define SOC_PM_SUPPORT_MODEM_PD (1)
#define SOC_PM_SUPPORT_XTAL32K_PD (1)
@ -431,8 +432,6 @@
/* macro redefine for pass esp_wifi headers md5sum check */
#define MAC_SUPPORT_PMU_MODEM_STATE SOC_PM_SUPPORT_PMU_MODEM_STATE
// #define SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY (1) /*!<Supports CRC only the stub code in RTC memory */
#define SOC_PM_CPU_RETENTION_BY_SW (1)
#define SOC_PM_MODEM_RETENTION_BY_REGDMA (0)
#define SOC_EXT_MEM_CACHE_TAG_IN_CPU_DOMAIN (1)

View File

@ -1,5 +1,5 @@
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
# Deep Sleep Example

View File

@ -41,6 +41,7 @@ menu "Example Configuration"
default 2 if !IDF_TARGET_ESP32H2
default 10 if IDF_TARGET_ESP32H2
range 0 7 if IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C5
range 0 6 if IDF_TARGET_ESP32C61
range 7 14 if IDF_TARGET_ESP32H2
range 0 21 if IDF_TARGET_ESP32S2
range 0 21 if IDF_TARGET_ESP32S3
@ -116,6 +117,7 @@ menu "Example Configuration"
default 4 if !IDF_TARGET_ESP32H2
default 11 if IDF_TARGET_ESP32H2
range 0 7 if IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C5
range 0 6 if IDF_TARGET_ESP32C61
range 7 14 if IDF_TARGET_ESP32H2
range 0 21 if IDF_TARGET_ESP32S2
range 0 21 if IDF_TARGET_ESP32S3
@ -270,6 +272,7 @@ menu "Example Configuration"
int "Enable wakeup from GPIO"
default 0
range 0 7 if IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C5
range 0 6 if IDF_TARGET_ESP32C61
range 0 15 if IDF_TARGET_ESP32P4
range 0 5 if !IDF_TARGET_ESP32C6 && !IDF_TARGET_ESP32C5