alex/esp-idf
alex/esp-idf
1
0
Fork 0
mirror of https://github.com/espressif/esp-idf.git synced 2024-10-05 20:47:46 -04:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity

refactor(gpio): add hal gpio driver

Browse Source
This commit is contained in:
xiongyu 2019-07-15 14:44:15 +08:00
parent e4f641f5a9
commit a3b79e9202
17 changed files with 2017 additions and 681 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

592
components/driver/gpio.c
View File

@ -1,9 +1,9 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
@ -11,6 +11,7 @@
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <esp_types.h>
#include "esp_err.h"
#include "freertos/FreeRTOS.h"
@ -19,13 +20,16 @@
#include "driver/rtc_io.h"
#include "soc/soc.h"
#include "soc/periph_defs.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/gpio_periph.h"
#include "esp_log.h"
#if !CONFIG_FREERTOS_UNICORE
#include "esp_ipc.h"
#endif
#include "soc/gpio_caps.h"
#include "soc/gpio_periph.h"
#include "esp_log.h"
#include "hal/gpio_hal.h"
static const char *GPIO_TAG = "gpio";
#define GPIO_CHECK(a, str, ret_val) \
if (!(a)) { \
ESP_LOGE(GPIO_TAG,"%s(%d): %s", __FUNCTION__, __LINE__, str); \
@ -35,7 +39,7 @@
typedef struct {
gpio_isr_t fn; /*!< isr function */
void* args; /*!< isr function args */
void *args; /*!< isr function args */
} gpio_isr_func_t;
// Used by the IPC call to register the interrupt service routine.
@ -48,69 +52,82 @@ typedef struct {
esp_err_t ret;
} gpio_isr_alloc_t;
static const char* GPIO_TAG = "gpio";
static gpio_isr_func_t* gpio_isr_func = NULL;
static gpio_isr_handle_t gpio_isr_handle;
static uint32_t isr_core_id = GPIO_ISR_CORE_ID_UNINIT;
static portMUX_TYPE gpio_spinlock = portMUX_INITIALIZER_UNLOCKED;
typedef struct {
gpio_hal_context_t *gpio_hal;
portMUX_TYPE gpio_spinlock;
uint32_t isr_core_id;
gpio_isr_func_t *gpio_isr_func;
gpio_isr_handle_t gpio_isr_handle;
} gpio_context_t;
static gpio_hal_context_t _gpio_hal = {
.dev = GPIO_HAL_GET_HW(GPIO_PORT_0)
};
static gpio_context_t gpio_context = {
.gpio_hal = &_gpio_hal,
.gpio_spinlock = portMUX_INITIALIZER_UNLOCKED,
.isr_core_id = GPIO_ISR_CORE_ID_UNINIT,
.gpio_isr_func = NULL,
};
esp_err_t gpio_pullup_en(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
if (RTC_GPIO_IS_VALID_GPIO(gpio_num)) {
if (rtc_gpio_is_valid_gpio(gpio_num)) {
rtc_gpio_pullup_en(gpio_num);
} else {
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_pullup_en(gpio_context.gpio_hal, gpio_num);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
#endif
return ESP_OK;
}
esp_err_t gpio_pullup_dis(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
if (RTC_GPIO_IS_VALID_GPIO(gpio_num)) {
if (rtc_gpio_is_valid_gpio(gpio_num)) {
rtc_gpio_pullup_dis(gpio_num);
} else {
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_pullup_dis(gpio_context.gpio_hal, gpio_num);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
#endif
return ESP_OK;
}
esp_err_t gpio_pulldown_en(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
if (RTC_GPIO_IS_VALID_GPIO(gpio_num)) {
if (rtc_gpio_is_valid_gpio(gpio_num)) {
rtc_gpio_pulldown_en(gpio_num);
} else {
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_pulldown_en(gpio_context.gpio_hal, gpio_num);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
#endif
return ESP_OK;
}
esp_err_t gpio_pulldown_dis(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
if (RTC_GPIO_IS_VALID_GPIO(gpio_num)) {
if (rtc_gpio_is_valid_gpio(gpio_num)) {
rtc_gpio_pulldown_dis(gpio_num);
} else {
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_pulldown_dis(gpio_context.gpio_hal, gpio_num);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
#endif
return ESP_OK;
}
@ -118,109 +135,91 @@ esp_err_t gpio_set_intr_type(gpio_num_t gpio_num, gpio_int_type_t intr_type)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
GPIO_CHECK(intr_type < GPIO_INTR_MAX, "GPIO interrupt type error", ESP_ERR_INVALID_ARG);
GPIO.pin[gpio_num].int_type = intr_type;
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_set_intr_type(gpio_context.gpio_hal, gpio_num, intr_type);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
return ESP_OK;
}
static void gpio_intr_status_clr(gpio_num_t gpio_num)
static esp_err_t gpio_intr_enable_on_core(gpio_num_t gpio_num, uint32_t core_id)
{
if (gpio_num < 32) {
GPIO.status_w1tc = BIT(gpio_num);
} else {
GPIO.status1_w1tc.intr_st = BIT(gpio_num - 32);
}
}
static esp_err_t gpio_intr_enable_on_core (gpio_num_t gpio_num, uint32_t core_id)
{
gpio_intr_status_clr(gpio_num);
#if CONFIG_IDF_TARGET_ESP32
if (core_id == 0) {
GPIO.pin[gpio_num].int_ena = GPIO_PRO_CPU_INTR_ENA; //enable pro cpu intr
} else {
GPIO.pin[gpio_num].int_ena = GPIO_APP_CPU_INTR_ENA; //enable pro cpu intr
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
if (core_id == 0) {
GPIO.pin[gpio_num].int_ena = GPIO_PRO_CPU_INTR_ENA; //enable pro cpu intr
}
#endif
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
gpio_hal_intr_enable_on_core(gpio_context.gpio_hal, gpio_num, core_id);
return ESP_OK;
}
esp_err_t gpio_intr_enable(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&gpio_spinlock);
if(isr_core_id == GPIO_ISR_CORE_ID_UNINIT) {
isr_core_id = xPortGetCoreID();
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
if(gpio_context.isr_core_id == GPIO_ISR_CORE_ID_UNINIT) {
gpio_context.isr_core_id = xPortGetCoreID();
}
portEXIT_CRITICAL(&gpio_spinlock);
return gpio_intr_enable_on_core (gpio_num, isr_core_id);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
return gpio_intr_enable_on_core (gpio_num, gpio_context.isr_core_id);
}
esp_err_t gpio_intr_disable(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
GPIO.pin[gpio_num].int_ena = 0; //disable GPIO intr
gpio_intr_status_clr(gpio_num);
gpio_hal_intr_disable(gpio_context.gpio_hal, gpio_num);
return ESP_OK;
}
static esp_err_t gpio_input_disable(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
gpio_hal_input_disable(gpio_context.gpio_hal, gpio_num);
return ESP_OK;
}
static esp_err_t gpio_input_enable(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
gpio_hal_input_enable(gpio_context.gpio_hal, gpio_num);
return ESP_OK;
}
static esp_err_t gpio_output_disable(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
if (gpio_num < 32) {
GPIO.enable_w1tc = (0x1 << gpio_num);
} else {
GPIO.enable1_w1tc.data = (0x1 << (gpio_num - 32));
}
// Ensure no other output signal is routed via GPIO matrix to this pin
REG_WRITE(GPIO_FUNC0_OUT_SEL_CFG_REG + (gpio_num * 4),
SIG_GPIO_OUT_IDX);
gpio_hal_output_disable(gpio_context.gpio_hal, gpio_num);
return ESP_OK;
}
static esp_err_t gpio_output_enable(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "GPIO output gpio_num error", ESP_ERR_INVALID_ARG);
if (gpio_num < 32) {
GPIO.enable_w1ts = (0x1 << gpio_num);
} else {
GPIO.enable1_w1ts.data = (0x1 << (gpio_num - 32));
}
gpio_hal_output_enable(gpio_context.gpio_hal, gpio_num);
gpio_matrix_out(gpio_num, SIG_GPIO_OUT_IDX, false, false);
return ESP_OK;
}
static esp_err_t gpio_od_disable(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
gpio_hal_od_disable(gpio_context.gpio_hal, gpio_num);
return ESP_OK;
}
static esp_err_t gpio_od_enable(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
gpio_hal_od_enable(gpio_context.gpio_hal, gpio_num);
return ESP_OK;
}
esp_err_t gpio_set_level(gpio_num_t gpio_num, uint32_t level)
{
GPIO_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "GPIO output gpio_num error", ESP_ERR_INVALID_ARG);
if (level) {
if (gpio_num < 32) {
GPIO.out_w1ts = (1 << gpio_num);
} else {
GPIO.out1_w1ts.data = (1 << (gpio_num - 32));
}
} else {
if (gpio_num < 32) {
GPIO.out_w1tc = (1 << gpio_num);
} else {
GPIO.out1_w1tc.data = (1 << (gpio_num - 32));
}
}
gpio_hal_set_level(gpio_context.gpio_hal, gpio_num, level);
return ESP_OK;
}
int gpio_get_level(gpio_num_t gpio_num)
{
if (gpio_num < 32) {
return (GPIO.in >> gpio_num) & 0x1;
} else {
return (GPIO.in1.data >> (gpio_num - 32)) & 0x1;
}
return gpio_hal_get_level(gpio_context.gpio_hal, gpio_num);
}
esp_err_t gpio_set_pull_mode(gpio_num_t gpio_num, gpio_pull_mode_t pull)
@ -228,58 +227,66 @@ esp_err_t gpio_set_pull_mode(gpio_num_t gpio_num, gpio_pull_mode_t pull)
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
GPIO_CHECK(pull <= GPIO_FLOATING, "GPIO pull mode error", ESP_ERR_INVALID_ARG);
esp_err_t ret = ESP_OK;
switch (pull) {
case GPIO_PULLUP_ONLY:
gpio_pulldown_dis(gpio_num);
gpio_pullup_en(gpio_num);
break;
case GPIO_PULLDOWN_ONLY:
gpio_pulldown_en(gpio_num);
gpio_pullup_dis(gpio_num);
break;
case GPIO_PULLUP_PULLDOWN:
gpio_pulldown_en(gpio_num);
gpio_pullup_en(gpio_num);
break;
case GPIO_FLOATING:
gpio_pulldown_dis(gpio_num);
gpio_pullup_dis(gpio_num);
break;
default:
ESP_LOGE(GPIO_TAG, "Unknown pull up/down mode,gpio_num=%u,pull=%u", gpio_num, pull);
ret = ESP_ERR_INVALID_ARG;
break;
case GPIO_PULLUP_ONLY:
gpio_pulldown_dis(gpio_num);
gpio_pullup_en(gpio_num);
break;
case GPIO_PULLDOWN_ONLY:
gpio_pulldown_en(gpio_num);
gpio_pullup_dis(gpio_num);
break;
case GPIO_PULLUP_PULLDOWN:
gpio_pulldown_en(gpio_num);
gpio_pullup_en(gpio_num);
break;
case GPIO_FLOATING:
gpio_pulldown_dis(gpio_num);
gpio_pullup_dis(gpio_num);
break;
default:
ESP_LOGE(GPIO_TAG, "Unknown pull up/down mode,gpio_num=%u,pull=%u", gpio_num, pull);
ret = ESP_ERR_INVALID_ARG;
break;
}
return ret;
}
esp_err_t gpio_set_direction(gpio_num_t gpio_num, gpio_mode_t mode)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
if (gpio_num >= 34 && (mode & GPIO_MODE_DEF_OUTPUT)) {
#elif CONFIG_IDF_TARGET_ESP32S2BETA
if (gpio_num >= 46 && (mode & GPIO_MODE_DEF_OUTPUT)) {
#endif
if ((GPIO_IS_VALID_OUTPUT_GPIO(gpio_num) != true) && (mode & GPIO_MODE_DEF_OUTPUT)) {
ESP_LOGE(GPIO_TAG, "io_num=%d can only be input", gpio_num);
return ESP_ERR_INVALID_ARG;
}
esp_err_t ret = ESP_OK;
if (mode & GPIO_MODE_DEF_INPUT) {
PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
gpio_input_enable(gpio_num);
} else {
PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
gpio_input_disable(gpio_num);
}
if (mode & GPIO_MODE_DEF_OUTPUT) {
gpio_output_enable(gpio_num);
} else {
gpio_output_disable(gpio_num);
}
if (mode & GPIO_MODE_DEF_OD) {
GPIO.pin[gpio_num].pad_driver = 1;
gpio_od_enable(gpio_num);
} else {
GPIO.pin[gpio_num].pad_driver = 0;
gpio_od_disable(gpio_num);
}
return ret;
}
@ -293,75 +300,82 @@ esp_err_t gpio_config(const gpio_config_t *pGPIOConfig)
uint8_t od_en = 0;
uint8_t pu_en = 0;
uint8_t pd_en = 0;
if (pGPIOConfig->pin_bit_mask == 0 || pGPIOConfig->pin_bit_mask >= (((uint64_t) 1) << GPIO_PIN_COUNT)) {
ESP_LOGE(GPIO_TAG, "GPIO_PIN mask error ");
return ESP_ERR_INVALID_ARG;
}
#if CONFIG_IDF_TARGET_ESP32
if ((pGPIOConfig->mode) & (GPIO_MODE_DEF_OUTPUT)) {
//GPIO 34/35/36/37/38/39 can only be used as input mode;
if ((gpio_pin_mask & ( GPIO_SEL_34 | GPIO_SEL_35 | GPIO_SEL_36 | GPIO_SEL_37 | GPIO_SEL_38 | GPIO_SEL_39))) {
ESP_LOGE(GPIO_TAG, "GPIO34-39 can only be used as input mode");
if(GPIO_MASK_CONTAIN_INPUT_GPIO(gpio_pin_mask)) {
ESP_LOGE(GPIO_TAG, "GPIO can only be used as input mode");
return ESP_ERR_INVALID_ARG;
}
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
if ( (pGPIOConfig->mode & GPIO_MODE_DEF_OUTPUT) && (gpio_pin_mask & GPIO_SEL_46) ) {
ESP_LOGE(GPIO_TAG, "GPIO46 can only be used as input mode");
return ESP_ERR_INVALID_ARG;
}
#endif
do {
io_reg = GPIO_PIN_MUX_REG[io_num];
if (((gpio_pin_mask >> io_num) & BIT(0))) {
if (!io_reg) {
ESP_LOGE(GPIO_TAG, "IO%d is not a valid GPIO",io_num);
ESP_LOGE(GPIO_TAG, "IO%d is not a valid GPIO", io_num);
return ESP_ERR_INVALID_ARG;
}
if(RTC_GPIO_IS_VALID_GPIO(io_num)){
if (rtc_gpio_is_valid_gpio(io_num)) {
rtc_gpio_deinit(io_num);
}
if ((pGPIOConfig->mode) & GPIO_MODE_DEF_INPUT) {
input_en = 1;
PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[io_num]);
gpio_input_enable(io_num);
} else {
PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[io_num]);
gpio_input_disable(io_num);
}
if ((pGPIOConfig->mode) & GPIO_MODE_DEF_OD) {
od_en = 1;
GPIO.pin[io_num].pad_driver = 1; /*0x01 Open-drain */
gpio_od_enable(io_num);
} else {
GPIO.pin[io_num].pad_driver = 0; /*0x00 Normal gpio output */
gpio_od_disable(io_num);
}
if ((pGPIOConfig->mode) & GPIO_MODE_DEF_OUTPUT) {
output_en = 1;
gpio_output_enable(io_num);
} else {
gpio_output_disable(io_num);
}
if (pGPIOConfig->pull_up_en) {
pu_en = 1;
gpio_pullup_en(io_num);
} else {
gpio_pullup_dis(io_num);
}
if (pGPIOConfig->pull_down_en) {
pd_en = 1;
gpio_pulldown_en(io_num);
} else {
gpio_pulldown_dis(io_num);
}
ESP_LOGI(GPIO_TAG, "GPIO[%d]| InputEn: %d| OutputEn: %d| OpenDrain: %d| Pullup: %d| Pulldown: %d| Intr:%d ", io_num, input_en, output_en, od_en, pu_en, pd_en, pGPIOConfig->intr_type);
gpio_set_intr_type(io_num, pGPIOConfig->intr_type);
if (pGPIOConfig->intr_type) {
gpio_intr_enable(io_num);
} else {
gpio_intr_disable(io_num);
}
PIN_FUNC_SELECT(io_reg, PIN_FUNC_GPIO); /*function number 2 is GPIO_FUNC for each pin */
}
io_num++;
} while (io_num < GPIO_PIN_COUNT);
return ESP_OK;
}
@ -380,106 +394,105 @@ esp_err_t gpio_reset_pin(gpio_num_t gpio_num)
return ESP_OK;
}
static inline void IRAM_ATTR gpio_isr_loop(uint32_t status, const uint32_t gpio_num_start) {
static inline void IRAM_ATTR gpio_isr_loop(uint32_t status, const uint32_t gpio_num_start)
{
while (status) {
int nbit = __builtin_ffs(status) - 1;
status &= ~(1 << nbit);
int gpio_num = gpio_num_start + nbit;
if (gpio_isr_func[gpio_num].fn != NULL) {
gpio_isr_func[gpio_num].fn(gpio_isr_func[gpio_num].args);
if (gpio_context.gpio_isr_func[gpio_num].fn != NULL) {
gpio_context.gpio_isr_func[gpio_num].fn(gpio_context.gpio_isr_func[gpio_num].args);
}
}
}
static void IRAM_ATTR gpio_intr_service(void* arg)
static void IRAM_ATTR gpio_intr_service(void *arg)
{
//GPIO intr process
if (gpio_isr_func == NULL) {
if (gpio_context.gpio_isr_func == NULL) {
return;
}
//read status to get interrupt status for GPIO0-31
uint32_t gpio_intr_status;
#ifdef CONFIG_IDF_TARGET_ESP32
gpio_intr_status = (isr_core_id == 0) ? GPIO.pcpu_int : GPIO.acpu_int;
#else
gpio_intr_status = GPIO.pcpu_int;
#endif
gpio_hal_get_intr_status(gpio_context.gpio_hal, gpio_context.isr_core_id, &gpio_intr_status);
if (gpio_intr_status) {
gpio_isr_loop(gpio_intr_status, 0);
GPIO.status_w1tc = gpio_intr_status;
gpio_hal_clear_intr_status(gpio_context.gpio_hal, gpio_intr_status);
}
//read status1 to get interrupt status for GPIO32-39
uint32_t gpio_intr_status_h;
#ifdef CONFIG_IDF_TARGET_ESP32
gpio_intr_status_h = (isr_core_id == 0) ? GPIO.pcpu_int1.intr : GPIO.acpu_int1.intr;
#else
gpio_intr_status_h = GPIO.pcpu_int1.intr;
#endif
gpio_hal_get_intr_status_high(gpio_context.gpio_hal, gpio_context.isr_core_id, &gpio_intr_status_h);
if (gpio_intr_status_h) {
gpio_isr_loop(gpio_intr_status_h, 32);
GPIO.status1_w1tc.intr_st = gpio_intr_status_h;
gpio_hal_clear_intr_status_high(gpio_context.gpio_hal, gpio_intr_status);
}
}
esp_err_t gpio_isr_handler_add(gpio_num_t gpio_num, gpio_isr_t isr_handler, void* args)
esp_err_t gpio_install_isr_service(int intr_alloc_flags)
{
GPIO_CHECK(gpio_isr_func != NULL, "GPIO isr service is not installed, call gpio_install_isr_service() first", ESP_ERR_INVALID_STATE);
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&gpio_spinlock);
gpio_intr_disable(gpio_num);
if (gpio_isr_func) {
gpio_isr_func[gpio_num].fn = isr_handler;
gpio_isr_func[gpio_num].args = args;
GPIO_CHECK(gpio_context.gpio_isr_func == NULL, "GPIO isr service already installed", ESP_ERR_INVALID_STATE);
esp_err_t ret;
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_context.gpio_isr_func = (gpio_isr_func_t *) calloc(GPIO_NUM_MAX, sizeof(gpio_isr_func_t));
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
if (gpio_context.gpio_isr_func == NULL) {
ret = ESP_ERR_NO_MEM;
} else {
ret = gpio_isr_register(gpio_intr_service, NULL, intr_alloc_flags, &gpio_context.gpio_isr_handle);
}
gpio_intr_enable_on_core (gpio_num, esp_intr_get_cpu(gpio_isr_handle));
portEXIT_CRITICAL(&gpio_spinlock);
return ret;
}
esp_err_t gpio_isr_handler_add(gpio_num_t gpio_num, gpio_isr_t isr_handler, void *args)
{
GPIO_CHECK(gpio_context.gpio_isr_func != NULL, "GPIO isr service is not installed, call gpio_install_isr_service() first", ESP_ERR_INVALID_STATE);
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_intr_disable(gpio_num);
if (gpio_context.gpio_isr_func) {
gpio_context.gpio_isr_func[gpio_num].fn = isr_handler;
gpio_context.gpio_isr_func[gpio_num].args = args;
}
gpio_intr_enable_on_core (gpio_num, esp_intr_get_cpu(gpio_context.gpio_isr_handle));
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
return ESP_OK;
}
esp_err_t gpio_isr_handler_remove(gpio_num_t gpio_num)
{
GPIO_CHECK(gpio_isr_func != NULL, "GPIO isr service is not installed, call gpio_install_isr_service() first", ESP_ERR_INVALID_STATE);
GPIO_CHECK(gpio_context.gpio_isr_func != NULL, "GPIO isr service is not installed, call gpio_install_isr_service() first", ESP_ERR_INVALID_STATE);
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
portENTER_CRITICAL(&gpio_spinlock);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_intr_disable(gpio_num);
if (gpio_isr_func) {
gpio_isr_func[gpio_num].fn = NULL;
gpio_isr_func[gpio_num].args = NULL;
if (gpio_context.gpio_isr_func) {
gpio_context.gpio_isr_func[gpio_num].fn = NULL;
gpio_context.gpio_isr_func[gpio_num].args = NULL;
}
portEXIT_CRITICAL(&gpio_spinlock);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
return ESP_OK;
}
esp_err_t gpio_install_isr_service(int intr_alloc_flags)
{
GPIO_CHECK(gpio_isr_func == NULL, "GPIO isr service already installed", ESP_ERR_INVALID_STATE);
esp_err_t ret;
portENTER_CRITICAL(&gpio_spinlock);
gpio_isr_func = (gpio_isr_func_t*) calloc(GPIO_NUM_MAX, sizeof(gpio_isr_func_t));
portEXIT_CRITICAL(&gpio_spinlock);
if (gpio_isr_func == NULL) {
ret = ESP_ERR_NO_MEM;
} else {
ret = gpio_isr_register(gpio_intr_service, NULL, intr_alloc_flags, &gpio_isr_handle);
}
return ret;
}
void gpio_uninstall_isr_service(void)
{
if (gpio_isr_func == NULL) {
if (gpio_context.gpio_isr_func == NULL) {
return;
}
portENTER_CRITICAL(&gpio_spinlock);
esp_intr_free(gpio_isr_handle);
free(gpio_isr_func);
gpio_isr_func = NULL;
isr_core_id = GPIO_ISR_CORE_ID_UNINIT;
portEXIT_CRITICAL(&gpio_spinlock);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
esp_intr_free(gpio_context.gpio_isr_handle);
free(gpio_context.gpio_isr_func);
gpio_context.gpio_isr_func = NULL;
gpio_context.isr_core_id = GPIO_ISR_CORE_ID_UNINIT;
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
return;
}
static void gpio_isr_register_on_core_static(void *param)
{
gpio_isr_alloc_t *p = (gpio_isr_alloc_t *)param;
@ -487,7 +500,7 @@ static void gpio_isr_register_on_core_static(void *param)
p->ret = esp_intr_alloc(p->source, p->intr_alloc_flags, p->fn, p->arg, p->handle);
}
esp_err_t gpio_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags, gpio_isr_handle_t *handle)
esp_err_t gpio_isr_register(void (*fn)(void *), void *arg, int intr_alloc_flags, gpio_isr_handle_t *handle)
{
GPIO_CHECK(fn, "GPIO ISR null", ESP_ERR_INVALID_ARG);
gpio_isr_alloc_t p;
@ -496,17 +509,17 @@ esp_err_t gpio_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags,
p.fn = fn;
p.arg = arg;
p.handle = handle;
portENTER_CRITICAL(&gpio_spinlock);
if(isr_core_id == GPIO_ISR_CORE_ID_UNINIT) {
isr_core_id = xPortGetCoreID();
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
if(gpio_context.isr_core_id == GPIO_ISR_CORE_ID_UNINIT) {
gpio_context.isr_core_id = xPortGetCoreID();
}
portEXIT_CRITICAL(&gpio_spinlock);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
esp_err_t ret;
#if CONFIG_FREERTOS_UNICORE
gpio_isr_register_on_core_static(&p);
ret = ESP_OK;
#else /* CONFIG_FREERTOS_UNICORE */
ret = esp_ipc_call_blocking(isr_core_id, gpio_isr_register_on_core_static, (void *)&p);
ret = esp_ipc_call_blocking(gpio_context.isr_core_id, gpio_isr_register_on_core_static, (void *)&p);
#endif /* !CONFIG_FREERTOS_UNICORE */
if(ret != ESP_OK || p.ret != ESP_OK) {
return ESP_ERR_NOT_FOUND;
@ -518,154 +531,118 @@ esp_err_t gpio_wakeup_enable(gpio_num_t gpio_num, gpio_int_type_t intr_type)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
esp_err_t ret = ESP_OK;
if (( intr_type == GPIO_INTR_LOW_LEVEL ) || ( intr_type == GPIO_INTR_HIGH_LEVEL )) {
if (RTC_GPIO_IS_VALID_GPIO(gpio_num)) {
if ((intr_type == GPIO_INTR_LOW_LEVEL) || (intr_type == GPIO_INTR_HIGH_LEVEL)) {
if (rtc_gpio_is_valid_gpio(gpio_num)) {
ret = rtc_gpio_wakeup_enable(gpio_num, intr_type);
} else {
GPIO.pin[gpio_num].int_type = intr_type;
GPIO.pin[gpio_num].wakeup_enable = 0x1;
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_wakeup_enable(gpio_context.gpio_hal, gpio_num, intr_type);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
} else {
ESP_LOGE(GPIO_TAG, "GPIO wakeup only supports level mode, but edge mode set. gpio_num:%u", gpio_num);
ret = ESP_ERR_INVALID_ARG;
}
return ret;
}
esp_err_t gpio_wakeup_disable(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
GPIO.pin[gpio_num].wakeup_enable = 0;
return ESP_OK;
esp_err_t ret = ESP_OK;
if (rtc_gpio_is_valid_gpio(gpio_num)) {
ret = rtc_gpio_wakeup_disable(gpio_num);
} else {
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_wakeup_disable(gpio_context.gpio_hal, gpio_num);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
return ret;
}
esp_err_t gpio_set_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t strength)
{
GPIO_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
GPIO_CHECK(strength < GPIO_DRIVE_CAP_MAX, "GPIO drive capability error", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
if (RTC_GPIO_IS_VALID_GPIO(gpio_num)) {
rtc_gpio_set_drive_capability(gpio_num, strength);
esp_err_t ret = ESP_OK;
if (rtc_gpio_is_valid_gpio(gpio_num)) {
ret = rtc_gpio_set_drive_capability(gpio_num, strength);
} else {
SET_PERI_REG_BITS(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, strength, FUN_DRV_S);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_set_drive_capability(gpio_context.gpio_hal, gpio_num, strength);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
SET_PERI_REG_BITS(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, strength, FUN_DRV_S);
#endif
return ESP_OK;
return ret;
}
esp_err_t gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t* strength)
esp_err_t gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t *strength)
{
GPIO_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "GPIO number error", ESP_ERR_INVALID_ARG);
GPIO_CHECK(strength != NULL, "GPIO drive capability pointer error", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32
if (RTC_GPIO_IS_VALID_GPIO(gpio_num)) {
return rtc_gpio_get_drive_capability(gpio_num, strength);
} else {
*strength = GET_PERI_REG_BITS2(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, FUN_DRV_S);
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
*strength = GET_PERI_REG_BITS2(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, FUN_DRV_S);
#endif
return ESP_OK;
}
esp_err_t ret = ESP_OK;
#if CONFIG_IDF_TARGET_ESP32
static const uint32_t GPIO_HOLD_MASK[34] = {
0,
GPIO_SEL_1,
0,
GPIO_SEL_0,
0,
GPIO_SEL_8,
GPIO_SEL_2,
GPIO_SEL_3,
GPIO_SEL_4,
GPIO_SEL_5,
GPIO_SEL_6,
GPIO_SEL_7,
0,
0,
0,
0,
GPIO_SEL_9,
GPIO_SEL_10,
GPIO_SEL_11,
GPIO_SEL_12,
0,
GPIO_SEL_14,
GPIO_SEL_15,
GPIO_SEL_16,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
};
#endif
if (rtc_gpio_is_valid_gpio(gpio_num)) {
ret = rtc_gpio_get_drive_capability(gpio_num, strength);
} else {
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_get_drive_capability(gpio_context.gpio_hal, gpio_num, strength);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
return ret;
}
esp_err_t gpio_hold_en(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "Only output-capable GPIO support this function", ESP_ERR_NOT_SUPPORTED);
esp_err_t r = ESP_OK;
if (RTC_GPIO_IS_VALID_GPIO(gpio_num)) {
r = rtc_gpio_hold_en(gpio_num);
#if CONFIG_IDF_TARGET_ESP32
int ret = ESP_OK;
if (rtc_gpio_is_valid_gpio(gpio_num)) {
ret = rtc_gpio_hold_en(gpio_num);
} else if (GPIO_HOLD_MASK[gpio_num]) {
SET_PERI_REG_MASK(RTC_IO_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_hold_en(gpio_context.gpio_hal, gpio_num);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
} else {
r = ESP_ERR_NOT_SUPPORTED;
ret = ESP_ERR_NOT_SUPPORTED;
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
} else {
SET_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD_REG, BIT(gpio_num - RTC_GPIO_NUMBER));
}
#endif
return r == ESP_OK ? ESP_OK : ESP_ERR_NOT_SUPPORTED;
return ret;
}
esp_err_t gpio_hold_dis(gpio_num_t gpio_num)
{
GPIO_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "Only output-capable GPIO support this function", ESP_ERR_NOT_SUPPORTED);
esp_err_t r = ESP_OK;
if (RTC_GPIO_IS_VALID_GPIO(gpio_num)) {
r = rtc_gpio_hold_dis(gpio_num);
#if CONFIG_IDF_TARGET_ESP32
int ret = ESP_OK;
if (rtc_gpio_is_valid_gpio(gpio_num)) {
ret = rtc_gpio_hold_dis(gpio_num);
}else if (GPIO_HOLD_MASK[gpio_num]) {
CLEAR_PERI_REG_MASK(RTC_IO_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_hold_dis(gpio_context.gpio_hal, gpio_num);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
} else {
r = ESP_ERR_NOT_SUPPORTED;
ret = ESP_ERR_NOT_SUPPORTED;
}
#elif CONFIG_IDF_TARGET_ESP32S2BETA
} else {
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD_REG, BIT(gpio_num - RTC_GPIO_NUMBER));
}
#endif
return r == ESP_OK ? ESP_OK : ESP_ERR_NOT_SUPPORTED;
return ret;
}
void gpio_deep_sleep_hold_en(void)
{
portENTER_CRITICAL(&gpio_spinlock);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
portEXIT_CRITICAL(&gpio_spinlock);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_deep_sleep_hold_en(gpio_context.gpio_hal);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
void gpio_deep_sleep_hold_dis(void)
{
portENTER_CRITICAL(&gpio_spinlock);
#if CONFIG_IDF_TARGET_ESP32
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
#elif CONFIG_IDF_TARGET_ESP32S2BETA
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_CLR_DG_PAD_AUTOHOLD);
#endif
portEXIT_CRITICAL(&gpio_spinlock);
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
gpio_hal_deep_sleep_hold_dis(gpio_context.gpio_hal);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
}
#if CONFIG_IDF_TARGET_ESP32S2BETA
@ -673,30 +650,31 @@ void gpio_deep_sleep_hold_dis(void)
esp_err_t gpio_force_hold_all()
{
rtc_gpio_force_hold_all();
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_HOLD);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
return ESP_OK;
}
esp_err_t gpio_force_unhold_all()
{
rtc_gpio_force_hold_dis_all();
portENTER_CRITICAL(&gpio_context.gpio_spinlock);
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_HOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_FORCE_UNHOLD);
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_CLR_DG_PAD_AUTOHOLD);
portEXIT_CRITICAL(&gpio_context.gpio_spinlock);
return ESP_OK;
}
#endif
void gpio_iomux_in(uint32_t gpio, uint32_t signal_idx)
{
GPIO.func_in_sel_cfg[signal_idx].sig_in_sel = 0;
PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio]);
gpio_hal_iomux_in(gpio_context.gpio_hal, gpio, signal_idx);
}
void gpio_iomux_out(uint8_t gpio_num, int func, bool oen_inv)
{
GPIO.func_out_sel_cfg[gpio_num].oen_sel = 0;
GPIO.func_out_sel_cfg[gpio_num].oen_inv_sel = oen_inv;
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], func);
gpio_hal_iomux_out(gpio_context.gpio_hal, gpio_num, func, (uint32_t)oen_inv);
}

278
components/driver/include/driver/gpio.h
View File

@ -1,4 +1,4 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
@ -12,8 +12,7 @@
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _DRIVER_GPIO_H_
#define _DRIVER_GPIO_H_
#pragma once
#include "esp_err.h"
#include <esp_types.h>
#include <esp_bit_defs.h>
@ -33,268 +32,6 @@
extern "C" {
#endif
#if CONFIG_IDF_TARGET_ESP32
#define GPIO_SEL_0 (BIT(0)) /*!< Pin 0 selected */
#define GPIO_SEL_1 (BIT(1)) /*!< Pin 1 selected */
#define GPIO_SEL_2 (BIT(2)) /*!< Pin 2 selected
@note There are more macros
like that up to pin 39,
excluding pins 20, 24 and 28..31.
They are not shown here
to reduce redundant information. */
/** @cond */
#define GPIO_SEL_3 (BIT(3)) /*!< Pin 3 selected */
#define GPIO_SEL_4 (BIT(4)) /*!< Pin 4 selected */
#define GPIO_SEL_5 (BIT(5)) /*!< Pin 5 selected */
#define GPIO_SEL_6 (BIT(6)) /*!< Pin 6 selected */
#define GPIO_SEL_7 (BIT(7)) /*!< Pin 7 selected */
#define GPIO_SEL_8 (BIT(8)) /*!< Pin 8 selected */
#define GPIO_SEL_9 (BIT(9)) /*!< Pin 9 selected */
#define GPIO_SEL_10 (BIT(10)) /*!< Pin 10 selected */
#define GPIO_SEL_11 (BIT(11)) /*!< Pin 11 selected */
#define GPIO_SEL_12 (BIT(12)) /*!< Pin 12 selected */
#define GPIO_SEL_13 (BIT(13)) /*!< Pin 13 selected */
#define GPIO_SEL_14 (BIT(14)) /*!< Pin 14 selected */
#define GPIO_SEL_15 (BIT(15)) /*!< Pin 15 selected */
#define GPIO_SEL_16 (BIT(16)) /*!< Pin 16 selected */
#define GPIO_SEL_17 (BIT(17)) /*!< Pin 17 selected */
#define GPIO_SEL_18 (BIT(18)) /*!< Pin 18 selected */
#define GPIO_SEL_19 (BIT(19)) /*!< Pin 19 selected */
#define GPIO_SEL_21 (BIT(21)) /*!< Pin 21 selected */
#define GPIO_SEL_22 (BIT(22)) /*!< Pin 22 selected */
#define GPIO_SEL_23 (BIT(23)) /*!< Pin 23 selected */
#define GPIO_SEL_25 (BIT(25)) /*!< Pin 25 selected */
#define GPIO_SEL_26 (BIT(26)) /*!< Pin 26 selected */
#define GPIO_SEL_27 (BIT(27)) /*!< Pin 27 selected */
#define GPIO_SEL_32 ((uint64_t)(((uint64_t)1)<<32)) /*!< Pin 32 selected */
#define GPIO_SEL_33 ((uint64_t)(((uint64_t)1)<<33)) /*!< Pin 33 selected */
#define GPIO_SEL_34 ((uint64_t)(((uint64_t)1)<<34)) /*!< Pin 34 selected */
#define GPIO_SEL_35 ((uint64_t)(((uint64_t)1)<<35)) /*!< Pin 35 selected */
#define GPIO_SEL_36 ((uint64_t)(((uint64_t)1)<<36)) /*!< Pin 36 selected */
#define GPIO_SEL_37 ((uint64_t)(((uint64_t)1)<<37)) /*!< Pin 37 selected */
#define GPIO_SEL_38 ((uint64_t)(((uint64_t)1)<<38)) /*!< Pin 38 selected */
#define GPIO_SEL_39 ((uint64_t)(((uint64_t)1)<<39)) /*!< Pin 39 selected */
#elif CONFIG_IDF_TARGET_ESP32S2BETA
#define GPIO_SEL_0 (BIT(0)) /*!< Pin 0 selected */
#define GPIO_SEL_1 (BIT(1)) /*!< Pin 1 selected */
#define GPIO_SEL_2 (BIT(2)) /*!< Pin 2 selected */
#define GPIO_SEL_3 (BIT(3)) /*!< Pin 3 selected */
#define GPIO_SEL_4 (BIT(4)) /*!< Pin 4 selected */
#define GPIO_SEL_5 (BIT(5)) /*!< Pin 5 selected */
#define GPIO_SEL_6 (BIT(6)) /*!< Pin 6 selected */
#define GPIO_SEL_7 (BIT(7)) /*!< Pin 7 selected */
#define GPIO_SEL_8 (BIT(8)) /*!< Pin 8 selected */
#define GPIO_SEL_9 (BIT(9)) /*!< Pin 9 selected */
#define GPIO_SEL_10 (BIT(10)) /*!< Pin 10 selected */
#define GPIO_SEL_11 (BIT(11)) /*!< Pin 11 selected */
#define GPIO_SEL_12 (BIT(12)) /*!< Pin 12 selected */
#define GPIO_SEL_13 (BIT(13)) /*!< Pin 13 selected */
#define GPIO_SEL_14 (BIT(14)) /*!< Pin 14 selected */
#define GPIO_SEL_15 (BIT(15)) /*!< Pin 15 selected */
#define GPIO_SEL_16 (BIT(16)) /*!< Pin 16 selected */
#define GPIO_SEL_17 (BIT(17)) /*!< Pin 17 selected */
#define GPIO_SEL_18 (BIT(18)) /*!< Pin 18 selected */
#define GPIO_SEL_19 (BIT(19)) /*!< Pin 19 selected */
#define GPIO_SEL_20 (BIT(20)) /*!< Pin 20 selected */
#define GPIO_SEL_21 (BIT(21)) /*!< Pin 21 selected */
#define GPIO_SEL_26 (BIT(26)) /*!< Pin 26 selected */
#define GPIO_SEL_27 (BIT(27)) /*!< Pin 27 selected */
#define GPIO_SEL_28 (BIT(28)) /*!< Pin 28 selected */
#define GPIO_SEL_29 (BIT(29)) /*!< Pin 29 selected */
#define GPIO_SEL_30 (BIT(30)) /*!< Pin 30 selected */
#define GPIO_SEL_31 (BIT(31)) /*!< Pin 31 selected */
#define GPIO_SEL_32 ((uint64_t)(((uint64_t)1)<<32)) /*!< Pin 32 selected */
#define GPIO_SEL_33 ((uint64_t)(((uint64_t)1)<<33)) /*!< Pin 33 selected */
#define GPIO_SEL_34 ((uint64_t)(((uint64_t)1)<<34)) /*!< Pin 34 selected */
#define GPIO_SEL_35 ((uint64_t)(((uint64_t)1)<<35)) /*!< Pin 35 selected */
#define GPIO_SEL_36 ((uint64_t)(((uint64_t)1)<<36)) /*!< Pin 36 selected */
#define GPIO_SEL_37 ((uint64_t)(((uint64_t)1)<<37)) /*!< Pin 37 selected */
#define GPIO_SEL_38 ((uint64_t)(((uint64_t)1)<<38)) /*!< Pin 38 selected */
#define GPIO_SEL_39 ((uint64_t)(((uint64_t)1)<<39)) /*!< Pin 39 selected */
#define GPIO_SEL_40 ((uint64_t)(((uint64_t)1)<<40)) /*!< Pin 40 selected */
#define GPIO_SEL_41 ((uint64_t)(((uint64_t)1)<<41)) /*!< Pin 41 selected */
#define GPIO_SEL_42 ((uint64_t)(((uint64_t)1)<<42)) /*!< Pin 42 selected */
#define GPIO_SEL_43 ((uint64_t)(((uint64_t)1)<<43)) /*!< Pin 43 selected */
#define GPIO_SEL_44 ((uint64_t)(((uint64_t)1)<<44)) /*!< Pin 44 selected */
#define GPIO_SEL_45 ((uint64_t)(((uint64_t)1)<<45)) /*!< Pin 45 selected */
#define GPIO_SEL_46 ((uint64_t)(((uint64_t)1)<<46)) /*!< Pin 46 selected */
#endif
#if CONFIG_IDF_TARGET_ESP32
#define GPIO_PIN_REG_0 IO_MUX_GPIO0_REG
#define GPIO_PIN_REG_1 IO_MUX_GPIO1_REG
#define GPIO_PIN_REG_2 IO_MUX_GPIO2_REG
#define GPIO_PIN_REG_3 IO_MUX_GPIO3_REG
#define GPIO_PIN_REG_4 IO_MUX_GPIO4_REG
#define GPIO_PIN_REG_5 IO_MUX_GPIO5_REG
#define GPIO_PIN_REG_6 IO_MUX_GPIO6_REG
#define GPIO_PIN_REG_7 IO_MUX_GPIO7_REG
#define GPIO_PIN_REG_8 IO_MUX_GPIO8_REG
#define GPIO_PIN_REG_9 IO_MUX_GPIO9_REG
#define GPIO_PIN_REG_10 IO_MUX_GPIO10_REG
#define GPIO_PIN_REG_11 IO_MUX_GPIO11_REG
#define GPIO_PIN_REG_12 IO_MUX_GPIO12_REG
#define GPIO_PIN_REG_13 IO_MUX_GPIO13_REG
#define GPIO_PIN_REG_14 IO_MUX_GPIO14_REG
#define GPIO_PIN_REG_15 IO_MUX_GPIO15_REG
#define GPIO_PIN_REG_16 IO_MUX_GPIO16_REG
#define GPIO_PIN_REG_17 IO_MUX_GPIO17_REG
#define GPIO_PIN_REG_18 IO_MUX_GPIO18_REG
#define GPIO_PIN_REG_19 IO_MUX_GPIO19_REG
#define GPIO_PIN_REG_20 IO_MUX_GPIO20_REG
#define GPIO_PIN_REG_21 IO_MUX_GPIO21_REG
#define GPIO_PIN_REG_22 IO_MUX_GPIO22_REG
#define GPIO_PIN_REG_23 IO_MUX_GPIO23_REG
#define GPIO_PIN_REG_25 IO_MUX_GPIO25_REG
#define GPIO_PIN_REG_26 IO_MUX_GPIO26_REG
#define GPIO_PIN_REG_27 IO_MUX_GPIO27_REG
#define GPIO_PIN_REG_32 IO_MUX_GPIO32_REG
#define GPIO_PIN_REG_33 IO_MUX_GPIO33_REG
#define GPIO_PIN_REG_34 IO_MUX_GPIO34_REG
#define GPIO_PIN_REG_35 IO_MUX_GPIO35_REG
#define GPIO_PIN_REG_36 IO_MUX_GPIO36_REG
#define GPIO_PIN_REG_37 IO_MUX_GPIO37_REG
#define GPIO_PIN_REG_38 IO_MUX_GPIO38_REG
#define GPIO_PIN_REG_39 IO_MUX_GPIO39_REG
#elif CONFIG_IDF_TARGET_ESP32S2BETA
#define GPIO_PIN_REG_0 IO_MUX_GPIO0_REG
#define GPIO_PIN_REG_1 IO_MUX_GPIO1_REG
#define GPIO_PIN_REG_2 IO_MUX_GPIO2_REG
#define GPIO_PIN_REG_3 IO_MUX_GPIO3_REG
#define GPIO_PIN_REG_4 IO_MUX_GPIO4_REG
#define GPIO_PIN_REG_5 IO_MUX_GPIO5_REG
#define GPIO_PIN_REG_6 IO_MUX_GPIO6_REG
#define GPIO_PIN_REG_7 IO_MUX_GPIO7_REG
#define GPIO_PIN_REG_8 IO_MUX_GPIO8_REG
#define GPIO_PIN_REG_9 IO_MUX_GPIO9_REG
#define GPIO_PIN_REG_10 IO_MUX_GPIO10_REG
#define GPIO_PIN_REG_11 IO_MUX_GPIO11_REG
#define GPIO_PIN_REG_12 IO_MUX_GPIO12_REG
#define GPIO_PIN_REG_13 IO_MUX_GPIO13_REG
#define GPIO_PIN_REG_14 IO_MUX_GPIO14_REG
#define GPIO_PIN_REG_15 IO_MUX_GPIO15_REG
#define GPIO_PIN_REG_16 IO_MUX_GPIO16_REG
#define GPIO_PIN_REG_17 IO_MUX_GPIO17_REG
#define GPIO_PIN_REG_18 IO_MUX_GPIO18_REG
#define GPIO_PIN_REG_19 IO_MUX_GPIO19_REG
#define GPIO_PIN_REG_20 IO_MUX_GPIO20_REG
#define GPIO_PIN_REG_21 IO_MUX_GPIO21_REG
#define GPIO_PIN_REG_22 IO_MUX_GPIO22_REG
#define GPIO_PIN_REG_23 IO_MUX_GPIO23_REG
#define GPIO_PIN_REG_24 IO_MUX_GPIO24_REG
#define GPIO_PIN_REG_25 IO_MUX_GPIO25_REG
#define GPIO_PIN_REG_26 IO_MUX_GPIO26_REG
#define GPIO_PIN_REG_27 IO_MUX_GPIO27_REG
#define GPIO_PIN_REG_28 IO_MUX_GPIO28_REG
#define GPIO_PIN_REG_29 IO_MUX_GPIO29_REG
#define GPIO_PIN_REG_30 IO_MUX_GPIO30_REG
#define GPIO_PIN_REG_31 IO_MUX_GPIO31_REG
#define GPIO_PIN_REG_32 IO_MUX_GPIO32_REG
#define GPIO_PIN_REG_33 IO_MUX_GPIO33_REG
#define GPIO_PIN_REG_34 IO_MUX_GPIO34_REG
#define GPIO_PIN_REG_35 IO_MUX_GPIO35_REG
#define GPIO_PIN_REG_36 IO_MUX_GPIO36_REG
#define GPIO_PIN_REG_37 IO_MUX_GPIO37_REG
#define GPIO_PIN_REG_38 IO_MUX_GPIO38_REG
#define GPIO_PIN_REG_39 IO_MUX_GPIO39_REG
#define GPIO_PIN_REG_40 IO_MUX_GPIO40_REG
#define GPIO_PIN_REG_41 IO_MUX_GPIO41_REG
#define GPIO_PIN_REG_42 IO_MUX_GPIO42_REG
#define GPIO_PIN_REG_43 IO_MUX_GPIO43_REG
#define GPIO_PIN_REG_44 IO_MUX_GPIO44_REG
#define GPIO_PIN_REG_45 IO_MUX_GPIO45_REG
#define GPIO_PIN_REG_46 IO_MUX_GPIO46_REG
#define GPIO_PIN_REG_47 IO_MUX_GPIO47_REG
#endif
#if CONFIG_IDF_TARGET_ESP32
#define GPIO_APP_CPU_INTR_ENA (BIT(0))
#define GPIO_APP_CPU_NMI_INTR_ENA (BIT(1))
#define GPIO_PRO_CPU_INTR_ENA (BIT(2))
#define GPIO_PRO_CPU_NMI_INTR_ENA (BIT(3))
#define GPIO_SDIO_EXT_INTR_ENA (BIT(4))
#elif CONFIG_IDF_TARGET_ESP32S2BETA
#define GPIO_PRO_CPU_INTR_ENA (BIT(0))
#define GPIO_PRO_CPU_NMI_INTR_ENA (BIT(1))
#endif
#define GPIO_MODE_DEF_DISABLE (0)
#define GPIO_MODE_DEF_INPUT (BIT0)
#define GPIO_MODE_DEF_OUTPUT (BIT1)
#define GPIO_MODE_DEF_OD (BIT2)
/** @endcond */
#define GPIO_IS_VALID_GPIO(gpio_num) ((gpio_num < GPIO_PIN_COUNT && GPIO_PIN_MUX_REG[gpio_num] != 0)) /*!< Check whether it is a valid GPIO number */
#if CONFIG_IDF_TARGET_ESP32
#define GPIO_IS_VALID_OUTPUT_GPIO(gpio_num) ((GPIO_IS_VALID_GPIO(gpio_num)) && (gpio_num < 34)) /*!< Check whether it can be a valid GPIO number of output mode */
#elif CONFIG_IDF_TARGET_ESP32S2BETA
#define GPIO_IS_VALID_OUTPUT_GPIO(gpio_num) ((GPIO_IS_VALID_GPIO(gpio_num)) && (gpio_num < 46)) /*!< Check whether it can be a valid GPIO number of output mode */
#endif
typedef enum {
GPIO_INTR_DISABLE = 0, /*!< Disable GPIO interrupt */
GPIO_INTR_POSEDGE = 1, /*!< GPIO interrupt type : rising edge */
GPIO_INTR_NEGEDGE = 2, /*!< GPIO interrupt type : falling edge */
GPIO_INTR_ANYEDGE = 3, /*!< GPIO interrupt type : both rising and falling edge */
GPIO_INTR_LOW_LEVEL = 4, /*!< GPIO interrupt type : input low level trigger */
GPIO_INTR_HIGH_LEVEL = 5, /*!< GPIO interrupt type : input high level trigger */
GPIO_INTR_MAX,
} gpio_int_type_t;
typedef enum {
GPIO_MODE_DISABLE = GPIO_MODE_DEF_DISABLE, /*!< GPIO mode : disable input and output */
GPIO_MODE_INPUT = GPIO_MODE_DEF_INPUT, /*!< GPIO mode : input only */
GPIO_MODE_OUTPUT = GPIO_MODE_DEF_OUTPUT, /*!< GPIO mode : output only mode */
GPIO_MODE_OUTPUT_OD = ((GPIO_MODE_DEF_OUTPUT)|(GPIO_MODE_DEF_OD)), /*!< GPIO mode : output only with open-drain mode */
GPIO_MODE_INPUT_OUTPUT_OD = ((GPIO_MODE_DEF_INPUT)|(GPIO_MODE_DEF_OUTPUT)|(GPIO_MODE_DEF_OD)), /*!< GPIO mode : output and input with open-drain mode*/
GPIO_MODE_INPUT_OUTPUT = ((GPIO_MODE_DEF_INPUT)|(GPIO_MODE_DEF_OUTPUT)), /*!< GPIO mode : output and input mode */
} gpio_mode_t;
typedef enum {
GPIO_PULLUP_DISABLE = 0x0, /*!< Disable GPIO pull-up resistor */
GPIO_PULLUP_ENABLE = 0x1, /*!< Enable GPIO pull-up resistor */
} gpio_pullup_t;
typedef enum {
GPIO_PULLDOWN_DISABLE = 0x0, /*!< Disable GPIO pull-down resistor */
GPIO_PULLDOWN_ENABLE = 0x1, /*!< Enable GPIO pull-down resistor */
} gpio_pulldown_t;
/**
* @brief Configuration parameters of GPIO pad for gpio_config function
*/
typedef struct {
uint64_t pin_bit_mask; /*!< GPIO pin: set with bit mask, each bit maps to a GPIO */
gpio_mode_t mode; /*!< GPIO mode: set input/output mode */
gpio_pullup_t pull_up_en; /*!< GPIO pull-up */
gpio_pulldown_t pull_down_en; /*!< GPIO pull-down */
gpio_int_type_t intr_type; /*!< GPIO interrupt type */
} gpio_config_t;
typedef enum {
GPIO_PULLUP_ONLY, /*!< Pad pull up */
GPIO_PULLDOWN_ONLY, /*!< Pad pull down */
GPIO_PULLUP_PULLDOWN, /*!< Pad pull up + pull down*/
GPIO_FLOATING, /*!< Pad floating */
} gpio_pull_mode_t;
typedef enum {
GPIO_DRIVE_CAP_0 = 0, /*!< Pad drive capability: weak */
GPIO_DRIVE_CAP_1 = 1, /*!< Pad drive capability: stronger */
GPIO_DRIVE_CAP_2 = 2, /*!< Pad drive capability: default value */
GPIO_DRIVE_CAP_DEFAULT = 2, /*!< Pad drive capability: default value */
GPIO_DRIVE_CAP_3 = 3, /*!< Pad drive capability: strongest */
GPIO_DRIVE_CAP_MAX,
} gpio_drive_cap_t;
typedef void (*gpio_isr_t)(void*);
typedef intr_handle_t gpio_isr_handle_t;
/**
@ -470,7 +207,7 @@ esp_err_t gpio_wakeup_disable(gpio_num_t gpio_num);
* - ESP_ERR_INVALID_ARG GPIO error
* - ESP_ERR_NOT_FOUND No free interrupt found with the specified flags
*/
esp_err_t gpio_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags, gpio_isr_handle_t *handle);
esp_err_t gpio_isr_register(void (*fn)(void *), void *arg, int intr_alloc_flags, gpio_isr_handle_t *handle);
/**
* @brief Enable pull-up on GPIO.
@ -562,7 +299,7 @@ void gpio_uninstall_isr_service(void);
* - ESP_ERR_INVALID_STATE Wrong state, the ISR service has not been initialized.
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t gpio_isr_handler_add(gpio_num_t gpio_num, gpio_isr_t isr_handler, void* args);
esp_err_t gpio_isr_handler_add(gpio_num_t gpio_num, gpio_isr_t isr_handler, void *args);
/**
* @brief Remove ISR handler for the corresponding GPIO pin.
@ -598,7 +335,7 @@ esp_err_t gpio_set_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t streng
* - ESP_OK Success
* - ESP_ERR_INVALID_ARG Parameter error
*/
esp_err_t gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t* strength);
esp_err_t gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t *strength);
/**
* @brief Enable gpio pad hold function.
@ -626,7 +363,7 @@ esp_err_t gpio_hold_en(gpio_num_t gpio_num);
* @brief Disable gpio pad hold function.
*
* When the chip is woken up from Deep-sleep, the gpio will be set to the default mode, so, the gpio will output
* the default level if this function is called. If you dont't want the level changes, the gpio should be configured to
* the default level if this function is called. If you don't want the level changes, the gpio should be configured to
* a known state before this function is called.
* e.g.
* If you hold gpio18 high during Deep-sleep, after the chip is woken up and `gpio_hold_dis` is called,
@ -670,7 +407,7 @@ void gpio_iomux_in(uint32_t gpio_num, uint32_t signal_idx);
* @param gpio_num gpio_num GPIO number of the pad.
* @param func The function number of the peripheral pin to output pin.
* One of the ``FUNC_X_*`` of specified pin (X) in ``soc/io_mux_reg.h``.
* @param oen_inv True if the output enable needs to be inversed, otherwise False.
* @param oen_inv True if the output enable needs to be inverted, otherwise False.
*/
void gpio_iomux_out(uint8_t gpio_num, int func, bool oen_inv);
@ -692,4 +429,3 @@ esp_err_t gpio_force_unhold_all(void);
}
#endif
#endif /* _DRIVER_GPIO_H_ */

1
components/soc/CMakeLists.txt
View File

@ -28,6 +28,7 @@ list(APPEND srcs
"src/hal/ledc_hal_iram.c"
"src/hal/i2c_hal.c"
"src/hal/i2c_hal_iram.c"
"src/hal/gpio_hal.c"
)
# TODO: SPI Flash HAL for ESP32S2Beta also

43
components/soc/esp32/gpio_periph.c
View File

@ -56,3 +56,46 @@ const uint32_t GPIO_PIN_MUX_REG[GPIO_PIN_COUNT] = {
IO_MUX_GPIO38_REG,
IO_MUX_GPIO39_REG,
};
const uint32_t GPIO_HOLD_MASK[GPIO_PIN_COUNT] = {
0,
BIT(1),
0,
BIT(0),
0,
BIT(8),
BIT(2),
BIT(3),
BIT(4),
BIT(5),
BIT(6),
BIT(7),
0,
0,
0,
0,
BIT(9),
BIT(10),
BIT(11),
BIT(12),
0,
BIT(14),
BIT(15),
BIT(16),
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
};

411
components/soc/esp32/include/hal/gpio_ll.h Normal file
View File

@ -0,0 +1,411 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use in application code.
* See readme.md in soc/include/hal/readme.md
******************************************************************************/
// The LL layer for ESP32 GPIO register operations
#pragma once
#include "soc/soc.h"
#include "soc/gpio_periph.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/rtc_io_reg.h"
#include "hal/gpio_types.h"
#ifdef __cplusplus
extern "C" {
#endif
// Get GPIO hardware instance with giving gpio num
#define GPIO_LL_GET_HW(num) (((num) == 0) ? (&GPIO) : NULL)
/**
* @brief Enable pull-up on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pullup_en(gpio_dev_t *hw, gpio_num_t gpio_num)
{
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
}
/**
* @brief Disable pull-up on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pullup_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
{
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
}
/**
* @brief Enable pull-down on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pulldown_en(gpio_dev_t *hw, gpio_num_t gpio_num)
{
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
}
/**
* @brief Disable pull-down on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pulldown_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
{
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
}
/**
* @brief GPIO set interrupt trigger type
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to set the trigger type of e.g. of GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param intr_type Interrupt type, select from gpio_int_type_t
*/
static inline void gpio_ll_set_intr_type(gpio_dev_t *hw, gpio_num_t gpio_num, gpio_int_type_t intr_type)
{
hw->pin[gpio_num].int_type = intr_type;
}
/**
* @brief Get GPIO interrupt status
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id interrupt core id
* @param status interrupt status
*/
static inline void gpio_ll_get_intr_status(gpio_dev_t *hw, uint32_t core_id, uint32_t *status)
{
*status = (core_id == 0) ? hw->pcpu_int : hw->acpu_int;
}
/**
* @brief Get GPIO interrupt status high
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id interrupt core id
* @param status interrupt status high
*/
static inline void gpio_ll_get_intr_status_high(gpio_dev_t *hw, uint32_t core_id, uint32_t *status)
{
*status = (core_id == 0) ? hw->pcpu_int1.intr : hw->acpu_int1.intr;
}
/**
* @brief Clear GPIO interrupt status
*
* @param hw Peripheral GPIO hardware instance address.
* @param mask interrupt status clear mask
*/
static inline void gpio_ll_clear_intr_status(gpio_dev_t *hw, uint32_t mask)
{
hw->status_w1tc = mask;
}
/**
* @brief Clear GPIO interrupt status high
*
* @param hw Peripheral GPIO hardware instance address.
* @param mask interrupt status high clear mask
*/
static inline void gpio_ll_clear_intr_status_high(gpio_dev_t *hw, uint32_t mask)
{
hw->status1_w1tc.intr_st = mask;
}
/**
* @brief Enable GPIO module interrupt signal
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id Interrupt enabled CPU to corresponding ID
* @param gpio_num GPIO number. If you want to enable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
*/
static inline void gpio_ll_intr_enable_on_core(gpio_dev_t *hw, uint32_t core_id, gpio_num_t gpio_num)
{
if (core_id == 0) {
hw->pin[gpio_num].int_ena = GPIO_PRO_CPU_INTR_ENA; //enable pro cpu intr
} else {
hw->pin[gpio_num].int_ena = GPIO_APP_CPU_INTR_ENA; //enable pro cpu intr
}
}
/**
* @brief Disable GPIO module interrupt signal
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to disable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
*/
static inline void gpio_ll_intr_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
hw->pin[gpio_num].int_ena = 0; //disable GPIO intr
}
/**
* @brief Disable input mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_input_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable input mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_input_enable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable output mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_output_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
if (gpio_num < 32) {
hw->enable_w1tc = (0x1 << gpio_num);
} else {
hw->enable1_w1tc.data = (0x1 << (gpio_num - 32));
}
// Ensure no other output signal is routed via GPIO matrix to this pin
REG_WRITE(GPIO_FUNC0_OUT_SEL_CFG_REG + (gpio_num * 4),
SIG_GPIO_OUT_IDX);
}
/**
* @brief Enable output mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_output_enable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
if (gpio_num < 32) {
hw->enable_w1ts = (0x1 << gpio_num);
} else {
hw->enable1_w1ts.data = (0x1 << (gpio_num - 32));
}
}
/**
* @brief Disable open-drain mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_od_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
hw->pin[gpio_num].pad_driver = 0;
}
/**
* @brief Enable open-drain mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_od_enable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
hw->pin[gpio_num].pad_driver = 1;
}
/**
* @brief GPIO set output level
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to set the output level of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param level Output level. 0: low ; 1: high
*/
static inline void gpio_ll_set_level(gpio_dev_t *hw, gpio_num_t gpio_num, uint32_t level)
{
if (level) {
if (gpio_num < 32) {
hw->out_w1ts = (1 << gpio_num);
} else {
hw->out1_w1ts.data = (1 << (gpio_num - 32));
}
} else {
if (gpio_num < 32) {
hw->out_w1tc = (1 << gpio_num);
} else {
hw->out1_w1tc.data = (1 << (gpio_num - 32));
}
}
}
/**
* @brief GPIO get input level
*
* @warning If the pad is not configured for input (or input and output) the returned value is always 0.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to get the logic level of e.g. pin GPIO16, gpio_num should be GPIO_NUM_16 (16);
*
* @return
* - 0 the GPIO input level is 0
* - 1 the GPIO input level is 1
*/
static inline int gpio_ll_get_level(gpio_dev_t *hw, gpio_num_t gpio_num)
{
if (gpio_num < 32) {
return (hw->in >> gpio_num) & 0x1;
} else {
return (hw->in1.data >> (gpio_num - 32)) & 0x1;
}
}
/**
* @brief Enable GPIO wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number.
* @param intr_type GPIO wake-up type. Only GPIO_INTR_LOW_LEVEL or GPIO_INTR_HIGH_LEVEL can be used.
*/
static inline void gpio_ll_wakeup_enable(gpio_dev_t *hw, gpio_num_t gpio_num, gpio_int_type_t intr_type)
{
hw->pin[gpio_num].int_type = intr_type;
hw->pin[gpio_num].wakeup_enable = 0x1;
}
/**
* @brief Disable GPIO wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_wakeup_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
hw->pin[gpio_num].wakeup_enable = 0;
}
/**
* @brief Set GPIO pad drive capability
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Drive capability of the pad
*/
static inline void gpio_ll_set_drive_capability(gpio_dev_t *hw, gpio_num_t gpio_num, gpio_drive_cap_t strength)
{
SET_PERI_REG_BITS(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, strength, FUN_DRV_S);
}
/**
* @brief Get GPIO pad drive capability
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Pointer to accept drive capability of the pad
*/
static inline void gpio_ll_get_drive_capability(gpio_dev_t *hw, gpio_num_t gpio_num, gpio_drive_cap_t *strength)
{
*strength = GET_PERI_REG_BITS2(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, FUN_DRV_S);
}
/**
* @brief Enable all digital gpio pad hold function during Deep-sleep.
*
* @param hw Peripheral GPIO hardware instance address.
*/
static inline void gpio_ll_deep_sleep_hold_en(gpio_dev_t *hw)
{
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
}
/**
* @brief Disable all digital gpio pad hold function during Deep-sleep.
*
* @param hw Peripheral GPIO hardware instance address.
*/
static inline void gpio_ll_deep_sleep_hold_dis(gpio_dev_t *hw)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
}
/**
* @brief Enable gpio pad hold function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
static inline void gpio_ll_hold_en(gpio_dev_t *hw, gpio_num_t gpio_num)
{
SET_PERI_REG_MASK(RTC_IO_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
}
/**
* @brief Disable gpio pad hold function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
static inline void gpio_ll_hold_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
{
CLEAR_PERI_REG_MASK(RTC_IO_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
}
/**
* @brief Set pad input to a peripheral signal through the IOMUX.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number of the pad.
* @param signal_idx Peripheral signal id to input. One of the ``*_IN_IDX`` signals in ``soc/gpio_sig_map.h``.
*/
static inline void gpio_ll_iomux_in(gpio_dev_t *hw, uint32_t gpio, uint32_t signal_idx)
{
hw->func_in_sel_cfg[signal_idx].sig_in_sel = 0;
PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio]);
}
/**
* @brief Set peripheral output to an GPIO pad through the IOMUX.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num gpio_num GPIO number of the pad.
* @param func The function number of the peripheral pin to output pin.
* One of the ``FUNC_X_*`` of specified pin (X) in ``soc/io_mux_reg.h``.
* @param oen_inv True if the output enable needs to be inverted, otherwise False.
*/
static inline void gpio_ll_iomux_out(gpio_dev_t *hw, uint8_t gpio_num, int func, uint32_t oen_inv)
{
hw->func_out_sel_cfg[gpio_num].oen_sel = 0;
hw->func_out_sel_cfg[gpio_num].oen_inv_sel = oen_inv;
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], func);
}
#ifdef __cplusplus
}
#endif

172
components/soc/esp32/include/soc/gpio_caps.h Normal file
View File

@ -0,0 +1,172 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
// ESP32 has 1 GPIO peripheral
#define GPIO_PORT_0 (0) /*!< GPIO port 0 */
#define GPIO_PORT_MAX (1) /*!< GPIO port max */
#define SOC_GPIO_PORT (GPIO_PORT_MAX)
#define GPIO_PIN_COUNT (40)
#define GPIO_SEL_0 (BIT(0)) /*!< Pin 0 selected */
#define GPIO_SEL_1 (BIT(1)) /*!< Pin 1 selected */
#define GPIO_SEL_2 (BIT(2)) /*!< Pin 2 selected
@note There are more macros
like that up to pin 39,
excluding pins 20, 24 and 28..31.
They are not shown here
to reduce redundant information. */
/** @cond */
#define GPIO_SEL_3 (BIT(3)) /*!< Pin 3 selected */
#define GPIO_SEL_4 (BIT(4)) /*!< Pin 4 selected */
#define GPIO_SEL_5 (BIT(5)) /*!< Pin 5 selected */
#define GPIO_SEL_6 (BIT(6)) /*!< Pin 6 selected */
#define GPIO_SEL_7 (BIT(7)) /*!< Pin 7 selected */
#define GPIO_SEL_8 (BIT(8)) /*!< Pin 8 selected */
#define GPIO_SEL_9 (BIT(9)) /*!< Pin 9 selected */
#define GPIO_SEL_10 (BIT(10)) /*!< Pin 10 selected */
#define GPIO_SEL_11 (BIT(11)) /*!< Pin 11 selected */
#define GPIO_SEL_12 (BIT(12)) /*!< Pin 12 selected */
#define GPIO_SEL_13 (BIT(13)) /*!< Pin 13 selected */
#define GPIO_SEL_14 (BIT(14)) /*!< Pin 14 selected */
#define GPIO_SEL_15 (BIT(15)) /*!< Pin 15 selected */
#define GPIO_SEL_16 (BIT(16)) /*!< Pin 16 selected */
#define GPIO_SEL_17 (BIT(17)) /*!< Pin 17 selected */
#define GPIO_SEL_18 (BIT(18)) /*!< Pin 18 selected */
#define GPIO_SEL_19 (BIT(19)) /*!< Pin 19 selected */
#define GPIO_SEL_21 (BIT(21)) /*!< Pin 21 selected */
#define GPIO_SEL_22 (BIT(22)) /*!< Pin 22 selected */
#define GPIO_SEL_23 (BIT(23)) /*!< Pin 23 selected */
#define GPIO_SEL_25 (BIT(25)) /*!< Pin 25 selected */
#define GPIO_SEL_26 (BIT(26)) /*!< Pin 26 selected */
#define GPIO_SEL_27 (BIT(27)) /*!< Pin 27 selected */
#define GPIO_SEL_32 ((uint64_t)(((uint64_t)1)<<32)) /*!< Pin 32 selected */
#define GPIO_SEL_33 ((uint64_t)(((uint64_t)1)<<33)) /*!< Pin 33 selected */
#define GPIO_SEL_34 ((uint64_t)(((uint64_t)1)<<34)) /*!< Pin 34 selected */
#define GPIO_SEL_35 ((uint64_t)(((uint64_t)1)<<35)) /*!< Pin 35 selected */
#define GPIO_SEL_36 ((uint64_t)(((uint64_t)1)<<36)) /*!< Pin 36 selected */
#define GPIO_SEL_37 ((uint64_t)(((uint64_t)1)<<37)) /*!< Pin 37 selected */
#define GPIO_SEL_38 ((uint64_t)(((uint64_t)1)<<38)) /*!< Pin 38 selected */
#define GPIO_SEL_39 ((uint64_t)(((uint64_t)1)<<39)) /*!< Pin 39 selected */
#define GPIO_PIN_REG_0 IO_MUX_GPIO0_REG
#define GPIO_PIN_REG_1 IO_MUX_GPIO1_REG
#define GPIO_PIN_REG_2 IO_MUX_GPIO2_REG
#define GPIO_PIN_REG_3 IO_MUX_GPIO3_REG
#define GPIO_PIN_REG_4 IO_MUX_GPIO4_REG
#define GPIO_PIN_REG_5 IO_MUX_GPIO5_REG
#define GPIO_PIN_REG_6 IO_MUX_GPIO6_REG
#define GPIO_PIN_REG_7 IO_MUX_GPIO7_REG
#define GPIO_PIN_REG_8 IO_MUX_GPIO8_REG
#define GPIO_PIN_REG_9 IO_MUX_GPIO9_REG
#define GPIO_PIN_REG_10 IO_MUX_GPIO10_REG
#define GPIO_PIN_REG_11 IO_MUX_GPIO11_REG
#define GPIO_PIN_REG_12 IO_MUX_GPIO12_REG
#define GPIO_PIN_REG_13 IO_MUX_GPIO13_REG
#define GPIO_PIN_REG_14 IO_MUX_GPIO14_REG
#define GPIO_PIN_REG_15 IO_MUX_GPIO15_REG
#define GPIO_PIN_REG_16 IO_MUX_GPIO16_REG
#define GPIO_PIN_REG_17 IO_MUX_GPIO17_REG
#define GPIO_PIN_REG_18 IO_MUX_GPIO18_REG
#define GPIO_PIN_REG_19 IO_MUX_GPIO19_REG
#define GPIO_PIN_REG_20 IO_MUX_GPIO20_REG
#define GPIO_PIN_REG_21 IO_MUX_GPIO21_REG
#define GPIO_PIN_REG_22 IO_MUX_GPIO22_REG
#define GPIO_PIN_REG_23 IO_MUX_GPIO23_REG
#define GPIO_PIN_REG_25 IO_MUX_GPIO25_REG
#define GPIO_PIN_REG_26 IO_MUX_GPIO26_REG
#define GPIO_PIN_REG_27 IO_MUX_GPIO27_REG
#define GPIO_PIN_REG_32 IO_MUX_GPIO32_REG
#define GPIO_PIN_REG_33 IO_MUX_GPIO33_REG
#define GPIO_PIN_REG_34 IO_MUX_GPIO34_REG
#define GPIO_PIN_REG_35 IO_MUX_GPIO35_REG
#define GPIO_PIN_REG_36 IO_MUX_GPIO36_REG
#define GPIO_PIN_REG_37 IO_MUX_GPIO37_REG
#define GPIO_PIN_REG_38 IO_MUX_GPIO38_REG
#define GPIO_PIN_REG_39 IO_MUX_GPIO39_REG
#define GPIO_APP_CPU_INTR_ENA (BIT(0))
#define GPIO_APP_CPU_NMI_INTR_ENA (BIT(1))
#define GPIO_PRO_CPU_INTR_ENA (BIT(2))
#define GPIO_PRO_CPU_NMI_INTR_ENA (BIT(3))
#define GPIO_SDIO_EXT_INTR_ENA (BIT(4))
#define GPIO_MODE_DEF_DISABLE (0)
#define GPIO_MODE_DEF_INPUT (BIT0)
#define GPIO_MODE_DEF_OUTPUT (BIT1)
#define GPIO_MODE_DEF_OD (BIT2)
/** @endcond */
#define GPIO_IS_VALID_GPIO(gpio_num) ((gpio_num < GPIO_PIN_COUNT && GPIO_PIN_MUX_REG[gpio_num] != 0)) /*!< Check whether it is a valid GPIO number */
#define GPIO_IS_VALID_OUTPUT_GPIO(gpio_num) ((GPIO_IS_VALID_GPIO(gpio_num)) && (gpio_num < 34)) /*!< Check whether it can be a valid GPIO number of output mode */
#define GPIO_MASK_CONTAIN_INPUT_GPIO(gpio_mask) ((gpio_mask & (GPIO_SEL_34 | GPIO_SEL_35 | GPIO_SEL_36 | GPIO_SEL_37 | GPIO_SEL_38 | GPIO_SEL_39))) /*!< Check whether it contains input io */
#define GPIO_NUM_NC (-1) /*!< Use to signal not connected to S/W */
#define GPIO_NUM_0 (0) /*!< GPIO0, input and output */
#define GPIO_NUM_1 (1) /*!< GPIO1, input and output */
#define GPIO_NUM_2 (2) /*!< GPIO2, input and output
@note There are more enumerations like that
up to GPIO39, excluding GPIO20, GPIO24 and GPIO28..31.
They are not shown here to reduce redundant information.
@note GPIO34..39 are input mode only. */
/** @cond */
#define GPIO_NUM_3 (3) /*!< GPIO3, input and output */
#define GPIO_NUM_4 (4) /*!< GPIO4, input and output */
#define GPIO_NUM_5 (5) /*!< GPIO5, input and output */
#define GPIO_NUM_6 (6) /*!< GPIO6, input and output */
#define GPIO_NUM_7 (7) /*!< GPIO7, input and output */
#define GPIO_NUM_8 (8) /*!< GPIO8, input and output */
#define GPIO_NUM_9 (9) /*!< GPIO9, input and output */
#define GPIO_NUM_10 (10) /*!< GPIO10, input and output */
#define GPIO_NUM_11 (11) /*!< GPIO11, input and output */
#define GPIO_NUM_12 (12) /*!< GPIO12, input and output */
#define GPIO_NUM_13 (13) /*!< GPIO13, input and output */
#define GPIO_NUM_14 (14) /*!< GPIO14, input and output */
#define GPIO_NUM_15 (15) /*!< GPIO15, input and output */
#define GPIO_NUM_16 (16) /*!< GPIO16, input and output */
#define GPIO_NUM_17 (17) /*!< GPIO17, input and output */
#define GPIO_NUM_18 (18) /*!< GPIO18, input and output */
#define GPIO_NUM_19 (19) /*!< GPIO19, input and output */
#define GPIO_NUM_21 (21) /*!< GPIO21, input and output */
#define GPIO_NUM_22 (22) /*!< GPIO22, input and output */
#define GPIO_NUM_23 (23) /*!< GPIO23, input and output */
#define GPIO_NUM_25 (25) /*!< GPIO25, input and output */
#define GPIO_NUM_26 (26) /*!< GPIO26, input and output */
#define GPIO_NUM_27 (27) /*!< GPIO27, input and output */
#define GPIO_NUM_32 (32) /*!< GPIO32, input and output */
#define GPIO_NUM_33 (33) /*!< GPIO33, input and output */
#define GPIO_NUM_34 (34) /*!< GPIO34, input mode only */
#define GPIO_NUM_35 (35) /*!< GPIO35, input mode only */
#define GPIO_NUM_36 (36) /*!< GPIO36, input mode only */
#define GPIO_NUM_37 (37) /*!< GPIO37, input mode only */
#define GPIO_NUM_38 (38) /*!< GPIO38, input mode only */
#define GPIO_NUM_39 (39) /*!< GPIO39, input mode only */
#define GPIO_NUM_MAX (40)
/** @endcond */
#ifdef __cplusplus
}
#endif

28
components/soc/esp32/include/soc/gpio_pins.h
View File

@ -1,28 +0,0 @@
// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _GPIO_PINS_H
#define _GPIO_PINS_H
#ifdef __cplusplus
extern "C"
{
#endif
#define GPIO_PIN_COUNT 40
#ifdef __cplusplus
}
#endif
#endif // _GPIO_PINS_H

51
components/soc/esp32s2beta/gpio_periph.c
View File

@ -64,3 +64,54 @@ const uint32_t GPIO_PIN_MUX_REG[GPIO_PIN_COUNT] = {
IO_MUX_GPIO46_REG,
0,
};
const uint32_t GPIO_HOLD_MASK[GPIO_PIN_COUNT] = {
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
BIT(1),
BIT(2),
BIT(3),
BIT(4),
BIT(5),
BIT(6),
BIT(7),
BIT(8),
BIT(9),
BIT(10),
BIT(11),
BIT(12),
BIT(13),
BIT(14),
BIT(15),
BIT(16),
BIT(17),
BIT(18),
BIT(19),
BIT(20),
BIT(21),
BIT(22),
BIT(23),
BIT(24),
BIT(25),
BIT(26),
};

409
components/soc/esp32s2beta/include/hal/gpio_ll.h Normal file
View File

@ -0,0 +1,409 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use in application code.
* See readme.md in soc/include/hal/readme.md
******************************************************************************/
// The LL layer for ESP32 GPIO register operations
#pragma once
#include "soc/soc.h"
#include "soc/gpio_periph.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/rtc_io_reg.h"
#include "hal/gpio_types.h"
#ifdef __cplusplus
extern "C" {
#endif
// Get GPIO hardware instance with giving gpio num
#define GPIO_LL_GET_HW(num) (((num) == 0) ? (&GPIO) : NULL)
/**
* @brief Enable pull-up on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pullup_en(gpio_dev_t *hw, gpio_num_t gpio_num)
{
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
}
/**
* @brief Disable pull-up on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pullup_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
{
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PU);
}
/**
* @brief Enable pull-down on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pulldown_en(gpio_dev_t *hw, gpio_num_t gpio_num)
{
REG_SET_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
}
/**
* @brief Disable pull-down on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_pulldown_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
{
REG_CLR_BIT(GPIO_PIN_MUX_REG[gpio_num], FUN_PD);
}
/**
* @brief GPIO set interrupt trigger type
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to set the trigger type of e.g. of GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param intr_type Interrupt type, select from gpio_int_type_t
*/
static inline void gpio_ll_set_intr_type(gpio_dev_t *hw, gpio_num_t gpio_num, gpio_int_type_t intr_type)
{
hw->pin[gpio_num].int_type = intr_type;
}
/**
* @brief Get GPIO interrupt status
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id interrupt core id
* @param status interrupt status
*/
static inline void gpio_ll_get_intr_status(gpio_dev_t *hw, uint32_t core_id, uint32_t *status)
{
*status = hw->pcpu_int;
}
/**
* @brief Get GPIO interrupt status high
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id interrupt core id
* @param status interrupt status high
*/
static inline void gpio_ll_get_intr_status_high(gpio_dev_t *hw, uint32_t core_id, uint32_t *status)
{
*status = hw->pcpu_int1.intr;
}
/**
* @brief Clear GPIO interrupt status
*
* @param hw Peripheral GPIO hardware instance address.
* @param mask interrupt status clear mask
*/
static inline void gpio_ll_clear_intr_status(gpio_dev_t *hw, uint32_t mask)
{
hw->status_w1tc = mask;
}
/**
* @brief Clear GPIO interrupt status high
*
* @param hw Peripheral GPIO hardware instance address.
* @param mask interrupt status high clear mask
*/
static inline void gpio_ll_clear_intr_status_high(gpio_dev_t *hw, uint32_t mask)
{
hw->status1_w1tc.intr_st = mask;
}
/**
* @brief Enable GPIO module interrupt signal
*
* @param hw Peripheral GPIO hardware instance address.
* @param core_id Interrupt enabled CPU to corresponding ID
* @param gpio_num GPIO number. If you want to enable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
*/
static inline void gpio_ll_intr_enable_on_core(gpio_dev_t *hw, uint32_t core_id, gpio_num_t gpio_num)
{
if (core_id == 0) {
GPIO.pin[gpio_num].int_ena = GPIO_PRO_CPU_INTR_ENA; //enable pro cpu intr
}
}
/**
* @brief Disable GPIO module interrupt signal
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to disable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
*/
static inline void gpio_ll_intr_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
hw->pin[gpio_num].int_ena = 0; //disable GPIO intr
}
/**
* @brief Disable input mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_input_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
PIN_INPUT_DISABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Enable input mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_input_enable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio_num]);
}
/**
* @brief Disable output mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_output_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
if (gpio_num < 32) {
hw->enable_w1tc = (0x1 << gpio_num);
} else {
hw->enable1_w1tc.data = (0x1 << (gpio_num - 32));
}
// Ensure no other output signal is routed via GPIO matrix to this pin
REG_WRITE(GPIO_FUNC0_OUT_SEL_CFG_REG + (gpio_num * 4),
SIG_GPIO_OUT_IDX);
}
/**
* @brief Enable output mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_output_enable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
if (gpio_num < 32) {
hw->enable_w1ts = (0x1 << gpio_num);
} else {
hw->enable1_w1ts.data = (0x1 << (gpio_num - 32));
}
}
/**
* @brief Disable open-drain mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_od_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
hw->pin[gpio_num].pad_driver = 0;
}
/**
* @brief Enable open-drain mode on GPIO.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_od_enable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
hw->pin[gpio_num].pad_driver = 1;
}
/**
* @brief GPIO set output level
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to set the output level of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param level Output level. 0: low ; 1: high
*/
static inline void gpio_ll_set_level(gpio_dev_t *hw, gpio_num_t gpio_num, uint32_t level)
{
if (level) {
if (gpio_num < 32) {
hw->out_w1ts = (1 << gpio_num);
} else {
hw->out1_w1ts.data = (1 << (gpio_num - 32));
}
} else {
if (gpio_num < 32) {
hw->out_w1tc = (1 << gpio_num);
} else {
hw->out1_w1tc.data = (1 << (gpio_num - 32));
}
}
}
/**
* @brief GPIO get input level
*
* @warning If the pad is not configured for input (or input and output) the returned value is always 0.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number. If you want to get the logic level of e.g. pin GPIO16, gpio_num should be GPIO_NUM_16 (16);
*
* @return
* - 0 the GPIO input level is 0
* - 1 the GPIO input level is 1
*/
static inline int gpio_ll_get_level(gpio_dev_t *hw, gpio_num_t gpio_num)
{
if (gpio_num < 32) {
return (hw->in >> gpio_num) & 0x1;
} else {
return (hw->in1.data >> (gpio_num - 32)) & 0x1;
}
}
/**
* @brief Enable GPIO wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number.
* @param intr_type GPIO wake-up type. Only GPIO_INTR_LOW_LEVEL or GPIO_INTR_HIGH_LEVEL can be used.
*/
static inline void gpio_ll_wakeup_enable(gpio_dev_t *hw, gpio_num_t gpio_num, gpio_int_type_t intr_type)
{
hw->pin[gpio_num].int_type = intr_type;
hw->pin[gpio_num].wakeup_enable = 0x1;
}
/**
* @brief Disable GPIO wake-up function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number
*/
static inline void gpio_ll_wakeup_disable(gpio_dev_t *hw, gpio_num_t gpio_num)
{
hw->pin[gpio_num].wakeup_enable = 0;
}
/**
* @brief Set GPIO pad drive capability
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Drive capability of the pad
*/
static inline void gpio_ll_set_drive_capability(gpio_dev_t *hw, gpio_num_t gpio_num, gpio_drive_cap_t strength)
{
SET_PERI_REG_BITS(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, strength, FUN_DRV_S);
}
/**
* @brief Get GPIO pad drive capability
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Pointer to accept drive capability of the pad
*/
static inline void gpio_ll_get_drive_capability(gpio_dev_t *hw, gpio_num_t gpio_num, gpio_drive_cap_t *strength)
{
*strength = GET_PERI_REG_BITS2(GPIO_PIN_MUX_REG[gpio_num], FUN_DRV_V, FUN_DRV_S);
}
/**
* @brief Enable all digital gpio pad hold function during Deep-sleep.
*
* @param hw Peripheral GPIO hardware instance address.
*/
static inline void gpio_ll_deep_sleep_hold_en(gpio_dev_t *hw)
{
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_DG_PAD_AUTOHOLD_EN_M);
}
/**
* @brief Disable all digital gpio pad hold function during Deep-sleep.
*
* @param hw Peripheral GPIO hardware instance address.
*/
static inline void gpio_ll_deep_sleep_hold_dis(gpio_dev_t *hw)
{
SET_PERI_REG_MASK(RTC_CNTL_DIG_ISO_REG, RTC_CNTL_CLR_DG_PAD_AUTOHOLD);
}
/**
* @brief Enable gpio pad hold function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
static inline void gpio_ll_hold_en(gpio_dev_t *hw, gpio_num_t gpio_num)
{
SET_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
}
/**
* @brief Disable gpio pad hold function.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number, only support output GPIOs
*/
static inline void gpio_ll_hold_dis(gpio_dev_t *hw, gpio_num_t gpio_num)
{
CLEAR_PERI_REG_MASK(RTC_CNTL_DIG_PAD_HOLD_REG, GPIO_HOLD_MASK[gpio_num]);
}
/**
* @brief Set pad input to a peripheral signal through the IOMUX.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num GPIO number of the pad.
* @param signal_idx Peripheral signal id to input. One of the ``*_IN_IDX`` signals in ``soc/gpio_sig_map.h``.
*/
static inline void gpio_ll_iomux_in(gpio_dev_t *hw, uint32_t gpio, uint32_t signal_idx)
{
hw->func_in_sel_cfg[signal_idx].sig_in_sel = 0;
PIN_INPUT_ENABLE(GPIO_PIN_MUX_REG[gpio]);
}
/**
* @brief Set peripheral output to an GPIO pad through the IOMUX.
*
* @param hw Peripheral GPIO hardware instance address.
* @param gpio_num gpio_num GPIO number of the pad.
* @param func The function number of the peripheral pin to output pin.
* One of the ``FUNC_X_*`` of specified pin (X) in ``soc/io_mux_reg.h``.
* @param oen_inv True if the output enable needs to be inverted, otherwise False.
*/
static inline void gpio_ll_iomux_out(gpio_dev_t *hw, uint8_t gpio_num, int func, uint32_t oen_inv)
{
hw->func_out_sel_cfg[gpio_num].oen_sel = 0;
hw->func_out_sel_cfg[gpio_num].oen_inv_sel = oen_inv;
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], func);
}
#ifdef __cplusplus
}
#endif

189
components/soc/esp32s2beta/include/soc/gpio_caps.h Normal file
View File

@ -0,0 +1,189 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
// ESP32-S2 has 1 GPIO peripheral
#define GPIO_PORT_0 (0) /*!< GPIO port 0 */
#define GPIO_PORT_MAX (1) /*!< GPIO port max */
#define SOC_GPIO_PORT (GPIO_PORT_MAX)
#define GPIO_PIN_COUNT (48)
#define GPIO_SEL_0 (BIT(0)) /*!< Pin 0 selected */
#define GPIO_SEL_1 (BIT(1)) /*!< Pin 1 selected */
#define GPIO_SEL_2 (BIT(2)) /*!< Pin 2 selected */
#define GPIO_SEL_3 (BIT(3)) /*!< Pin 3 selected */
#define GPIO_SEL_4 (BIT(4)) /*!< Pin 4 selected */
#define GPIO_SEL_5 (BIT(5)) /*!< Pin 5 selected */
#define GPIO_SEL_6 (BIT(6)) /*!< Pin 6 selected */
#define GPIO_SEL_7 (BIT(7)) /*!< Pin 7 selected */
#define GPIO_SEL_8 (BIT(8)) /*!< Pin 8 selected */
#define GPIO_SEL_9 (BIT(9)) /*!< Pin 9 selected */
#define GPIO_SEL_10 (BIT(10)) /*!< Pin 10 selected */
#define GPIO_SEL_11 (BIT(11)) /*!< Pin 11 selected */
#define GPIO_SEL_12 (BIT(12)) /*!< Pin 12 selected */
#define GPIO_SEL_13 (BIT(13)) /*!< Pin 13 selected */
#define GPIO_SEL_14 (BIT(14)) /*!< Pin 14 selected */
#define GPIO_SEL_15 (BIT(15)) /*!< Pin 15 selected */
#define GPIO_SEL_16 (BIT(16)) /*!< Pin 16 selected */
#define GPIO_SEL_17 (BIT(17)) /*!< Pin 17 selected */
#define GPIO_SEL_18 (BIT(18)) /*!< Pin 18 selected */
#define GPIO_SEL_19 (BIT(19)) /*!< Pin 19 selected */
#define GPIO_SEL_20 (BIT(20)) /*!< Pin 20 selected */
#define GPIO_SEL_21 (BIT(21)) /*!< Pin 21 selected */
#define GPIO_SEL_26 (BIT(26)) /*!< Pin 26 selected */
#define GPIO_SEL_27 (BIT(27)) /*!< Pin 27 selected */
#define GPIO_SEL_28 (BIT(28)) /*!< Pin 28 selected */
#define GPIO_SEL_29 (BIT(29)) /*!< Pin 29 selected */
#define GPIO_SEL_30 (BIT(30)) /*!< Pin 30 selected */
#define GPIO_SEL_31 (BIT(31)) /*!< Pin 31 selected */
#define GPIO_SEL_32 ((uint64_t)(((uint64_t)1)<<32)) /*!< Pin 32 selected */
#define GPIO_SEL_33 ((uint64_t)(((uint64_t)1)<<33)) /*!< Pin 33 selected */
#define GPIO_SEL_34 ((uint64_t)(((uint64_t)1)<<34)) /*!< Pin 34 selected */
#define GPIO_SEL_35 ((uint64_t)(((uint64_t)1)<<35)) /*!< Pin 35 selected */
#define GPIO_SEL_36 ((uint64_t)(((uint64_t)1)<<36)) /*!< Pin 36 selected */
#define GPIO_SEL_37 ((uint64_t)(((uint64_t)1)<<37)) /*!< Pin 37 selected */
#define GPIO_SEL_38 ((uint64_t)(((uint64_t)1)<<38)) /*!< Pin 38 selected */
#define GPIO_SEL_39 ((uint64_t)(((uint64_t)1)<<39)) /*!< Pin 39 selected */
#define GPIO_SEL_40 ((uint64_t)(((uint64_t)1)<<40)) /*!< Pin 40 selected */
#define GPIO_SEL_41 ((uint64_t)(((uint64_t)1)<<41)) /*!< Pin 41 selected */
#define GPIO_SEL_42 ((uint64_t)(((uint64_t)1)<<42)) /*!< Pin 42 selected */
#define GPIO_SEL_43 ((uint64_t)(((uint64_t)1)<<43)) /*!< Pin 43 selected */
#define GPIO_SEL_44 ((uint64_t)(((uint64_t)1)<<44)) /*!< Pin 44 selected */
#define GPIO_SEL_45 ((uint64_t)(((uint64_t)1)<<45)) /*!< Pin 45 selected */
#define GPIO_SEL_46 ((uint64_t)(((uint64_t)1)<<46)) /*!< Pin 46 selected */
#define GPIO_PIN_REG_0 IO_MUX_GPIO0_REG
#define GPIO_PIN_REG_1 IO_MUX_GPIO1_REG
#define GPIO_PIN_REG_2 IO_MUX_GPIO2_REG
#define GPIO_PIN_REG_3 IO_MUX_GPIO3_REG
#define GPIO_PIN_REG_4 IO_MUX_GPIO4_REG
#define GPIO_PIN_REG_5 IO_MUX_GPIO5_REG
#define GPIO_PIN_REG_6 IO_MUX_GPIO6_REG
#define GPIO_PIN_REG_7 IO_MUX_GPIO7_REG
#define GPIO_PIN_REG_8 IO_MUX_GPIO8_REG
#define GPIO_PIN_REG_9 IO_MUX_GPIO9_REG
#define GPIO_PIN_REG_10 IO_MUX_GPIO10_REG
#define GPIO_PIN_REG_11 IO_MUX_GPIO11_REG
#define GPIO_PIN_REG_12 IO_MUX_GPIO12_REG
#define GPIO_PIN_REG_13 IO_MUX_GPIO13_REG
#define GPIO_PIN_REG_14 IO_MUX_GPIO14_REG
#define GPIO_PIN_REG_15 IO_MUX_GPIO15_REG
#define GPIO_PIN_REG_16 IO_MUX_GPIO16_REG
#define GPIO_PIN_REG_17 IO_MUX_GPIO17_REG
#define GPIO_PIN_REG_18 IO_MUX_GPIO18_REG
#define GPIO_PIN_REG_19 IO_MUX_GPIO19_REG
#define GPIO_PIN_REG_20 IO_MUX_GPIO20_REG
#define GPIO_PIN_REG_21 IO_MUX_GPIO21_REG
#define GPIO_PIN_REG_22 IO_MUX_GPIO22_REG
#define GPIO_PIN_REG_23 IO_MUX_GPIO23_REG
#define GPIO_PIN_REG_24 IO_MUX_GPIO24_REG
#define GPIO_PIN_REG_25 IO_MUX_GPIO25_REG
#define GPIO_PIN_REG_26 IO_MUX_GPIO26_REG
#define GPIO_PIN_REG_27 IO_MUX_GPIO27_REG
#define GPIO_PIN_REG_28 IO_MUX_GPIO28_REG
#define GPIO_PIN_REG_29 IO_MUX_GPIO29_REG
#define GPIO_PIN_REG_30 IO_MUX_GPIO30_REG
#define GPIO_PIN_REG_31 IO_MUX_GPIO31_REG
#define GPIO_PIN_REG_32 IO_MUX_GPIO32_REG
#define GPIO_PIN_REG_33 IO_MUX_GPIO33_REG
#define GPIO_PIN_REG_34 IO_MUX_GPIO34_REG
#define GPIO_PIN_REG_35 IO_MUX_GPIO35_REG
#define GPIO_PIN_REG_36 IO_MUX_GPIO36_REG
#define GPIO_PIN_REG_37 IO_MUX_GPIO37_REG
#define GPIO_PIN_REG_38 IO_MUX_GPIO38_REG
#define GPIO_PIN_REG_39 IO_MUX_GPIO39_REG
#define GPIO_PIN_REG_40 IO_MUX_GPIO40_REG
#define GPIO_PIN_REG_41 IO_MUX_GPIO41_REG
#define GPIO_PIN_REG_42 IO_MUX_GPIO42_REG
#define GPIO_PIN_REG_43 IO_MUX_GPIO43_REG
#define GPIO_PIN_REG_44 IO_MUX_GPIO44_REG
#define GPIO_PIN_REG_45 IO_MUX_GPIO45_REG
#define GPIO_PIN_REG_46 IO_MUX_GPIO46_REG
#define GPIO_PIN_REG_47 IO_MUX_GPIO47_REG
#define GPIO_PRO_CPU_INTR_ENA (BIT(0))
#define GPIO_PRO_CPU_NMI_INTR_ENA (BIT(1))
#define GPIO_MODE_DEF_DISABLE (0)
#define GPIO_MODE_DEF_INPUT (BIT0)
#define GPIO_MODE_DEF_OUTPUT (BIT1)
#define GPIO_MODE_DEF_OD (BIT2)
#define GPIO_IS_VALID_GPIO(gpio_num) ((gpio_num < GPIO_PIN_COUNT && GPIO_PIN_MUX_REG[gpio_num] != 0)) /*!< Check whether it is a valid GPIO number */
#define GPIO_IS_VALID_OUTPUT_GPIO(gpio_num) ((GPIO_IS_VALID_GPIO(gpio_num)) && (gpio_num < 46)) /*!< Check whether it can be a valid GPIO number of output mode */
#define GPIO_MASK_CONTAIN_INPUT_GPIO(gpio_mask) ((gpio_mask & (GPIO_SEL_46))) /*!< Check whether it contains input io */
#define GPIO_NUM_NC (-1) /*!< Use to signal not connected to S/W */
#define GPIO_NUM_0 (0) /*!< GPIO0, input and output */
#define GPIO_NUM_1 (1) /*!< GPIO1, input and output */
#define GPIO_NUM_2 (2) /*!< GPIO2, input and output
@note There are more enumerations like that
up to GPIO39, excluding GPIO20, GPIO24 and GPIO28..31.
They are not shown here to reduce redundant information.
@note GPIO34..39 are input mode only. */
/** @cond */
#define GPIO_NUM_3 (3) /*!< GPIO3, input and output */
#define GPIO_NUM_4 (4) /*!< GPIO4, input and output */
#define GPIO_NUM_5 (5) /*!< GPIO5, input and output */
#define GPIO_NUM_6 (6) /*!< GPIO6, input and output */
#define GPIO_NUM_7 (7) /*!< GPIO7, input and output */
#define GPIO_NUM_8 (8) /*!< GPIO8, input and output */
#define GPIO_NUM_9 (9) /*!< GPIO9, input and output */
#define GPIO_NUM_10 (10) /*!< GPIO10, input and output */
#define GPIO_NUM_11 (11) /*!< GPIO11, input and output */
#define GPIO_NUM_12 (12) /*!< GPIO12, input and output */
#define GPIO_NUM_13 (13) /*!< GPIO13, input and output */
#define GPIO_NUM_14 (14) /*!< GPIO14, input and output */
#define GPIO_NUM_15 (15) /*!< GPIO15, input and output */
#define GPIO_NUM_16 (16) /*!< GPIO16, input and output */
#define GPIO_NUM_17 (17) /*!< GPIO17, input and output */
#define GPIO_NUM_18 (18) /*!< GPIO18, input and output */
#define GPIO_NUM_19 (19) /*!< GPIO19, input and output */
#define GPIO_NUM_21 (21) /*!< GPIO21, input and output */
#define GPIO_NUM_22 (22) /*!< GPIO22, input and output */
#define GPIO_NUM_23 (23) /*!< GPIO23, input and output */
#define GPIO_NUM_25 (25) /*!< GPIO25, input and output */
#define GPIO_NUM_26 (26) /*!< GPIO26, input and output */
#define GPIO_NUM_27 (27) /*!< GPIO27, input and output */
#define GPIO_NUM_32 (32) /*!< GPIO32, input and output */
#define GPIO_NUM_33 (33) /*!< GPIO33, input and output */
#define GPIO_NUM_34 (34) /*!< GPIO34, input mode only */
#define GPIO_NUM_35 (35) /*!< GPIO35, input mode only */
#define GPIO_NUM_36 (36) /*!< GPIO36, input mode only */
#define GPIO_NUM_37 (37) /*!< GPIO37, input mode only */
#define GPIO_NUM_38 (38) /*!< GPIO38, input mode only */
#define GPIO_NUM_39 (39) /*!< GPIO39, input mode only */
#define GPIO_NUM_40 (40) /*!< GPIO40, input and output */
#define GPIO_NUM_41 (41) /*!< GPIO41, input and output */
#define GPIO_NUM_42 (42) /*!< GPIO42, input and output */
#define GPIO_NUM_43 (43) /*!< GPIO43, input and output */
#define GPIO_NUM_44 (44) /*!< GPIO44, input and output */
#define GPIO_NUM_45 (45) /*!< GPIO45, input and output */
#define GPIO_NUM_46 (46) /*!< GPIO46, input mode only */
#define GPIO_NUM_MAX (47)
/** @endcond */
#ifdef __cplusplus
}
#endif

28
components/soc/esp32s2beta/include/soc/gpio_pins.h
View File

@ -1,28 +0,0 @@
// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _GPIO_PINS_H
#define _GPIO_PINS_H
#ifdef __cplusplus
extern "C"
{
#endif
#define GPIO_PIN_COUNT 48
#ifdef __cplusplus
}
#endif
#endif // _GPIO_PINS_H

324
components/soc/include/hal/gpio_hal.h Normal file
View File

@ -0,0 +1,324 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*******************************************************************************
* NOTICE
* The hal is not public api, don't use in application code.
* See readme.md in soc/include/hal/readme.md
******************************************************************************/
// The HAL layer for GPIO
#pragma once
#include "soc/gpio_periph.h"
#include "hal/gpio_ll.h"
#include "hal/gpio_types.h"
#ifdef CONFIG_LEGACY_INCLUDE_COMMON_HEADERS
#include "soc/rtc_io_reg.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
// Get GPIO hardware instance with giving gpio num
#define GPIO_HAL_GET_HW(num) GPIO_LL_GET_HW(num)
/**
* Context that should be maintained by both the driver and the HAL
*/
typedef struct {
gpio_dev_t *dev;
uint32_t version;
} gpio_hal_context_t;
/**
* @brief Enable pull-up on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_pullup_en(hal, gpio_num) gpio_ll_pullup_en((hal)->dev, gpio_num)
/**
* @brief Disable pull-up on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_pullup_dis(hal, gpio_num) gpio_ll_pullup_dis((hal)->dev, gpio_num)
/**
* @brief Enable pull-down on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_pulldown_en(hal, gpio_num) gpio_ll_pulldown_en((hal)->dev, gpio_num)
/**
* @brief Disable pull-down on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_pulldown_dis(hal, gpio_num) gpio_ll_pulldown_dis((hal)->dev, gpio_num)
/**
* @brief GPIO set interrupt trigger type
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number. If you want to set the trigger type of e.g. of GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param intr_type Interrupt type, select from gpio_int_type_t
*/
#define gpio_hal_set_intr_type(hal, gpio_num, intr_type) gpio_ll_set_intr_type((hal)->dev, gpio_num, intr_type)
/**
* @brief Get GPIO interrupt status
*
* @param hal Context of the HAL layer
* @param core_id interrupt core id
* @param status interrupt status
*/
#define gpio_hal_get_intr_status(hal, core_id, status) gpio_ll_get_intr_status((hal)->dev, core_id, status)
/**
* @brief Get GPIO interrupt status high
*
* @param hal Context of the HAL layer
* @param core_id interrupt core id
* @param status interrupt status high
*/
#define gpio_hal_get_intr_status_high(hal, core_id, status) gpio_ll_get_intr_status_high((hal)->dev, core_id, status)
/**
* @brief Clear GPIO interrupt status
*
* @param hal Context of the HAL layer
* @param mask interrupt status clear mask
*/
#define gpio_hal_clear_intr_status(hal, mask) gpio_ll_clear_intr_status((hal)->dev, mask)
/**
* @brief Clear GPIO interrupt status high
*
* @param hal Context of the HAL layer
* @param mask interrupt status high clear mask
*/
#define gpio_hal_clear_intr_status_high(hal, mask) gpio_ll_clear_intr_status_high((hal)->dev, mask)
/**
* @brief Enable GPIO module interrupt signal
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number. If you want to enable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param core_id Interrupt enabled CPU to corresponding ID
*/
void gpio_hal_intr_enable_on_core(gpio_hal_context_t *hal, gpio_num_t gpio_num, uint32_t core_id);
/**
* @brief Disable GPIO module interrupt signal
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number. If you want to disable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
*/
void gpio_hal_intr_disable(gpio_hal_context_t *hal, gpio_num_t gpio_num);
/**
* @brief Disable input mode on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_input_disable(hal, gpio_num) gpio_ll_input_disable((hal)->dev, gpio_num)
/**
* @brief Enable input mode on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_input_enable(hal, gpio_num) gpio_ll_input_enable((hal)->dev, gpio_num)
/**
* @brief Disable output mode on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_output_disable(hal, gpio_num) gpio_ll_output_disable((hal)->dev, gpio_num)
/**
* @brief Enable output mode on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_output_enable(hal, gpio_num) gpio_ll_output_enable((hal)->dev, gpio_num)
/**
* @brief Disable open-drain mode on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_od_disable(hal, gpio_num) gpio_ll_od_disable((hal)->dev, gpio_num)
/**
* @brief Enable open-drain mode on GPIO.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_od_enable(hal, gpio_num) gpio_ll_od_enable((hal)->dev, gpio_num)
/**
* @brief GPIO set output level
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number. If you want to set the output level of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
* @param level Output level. 0: low ; 1: high
*/
#define gpio_hal_set_level(hal, gpio_num, level) gpio_ll_set_level((hal)->dev, gpio_num, level)
/**
* @brief GPIO get input level
*
* @warning If the pad is not configured for input (or input and output) the returned value is always 0.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number. If you want to get the logic level of e.g. pin GPIO16, gpio_num should be GPIO_NUM_16 (16);
*
* @return
* - 0 the GPIO input level is 0
* - 1 the GPIO input level is 1
*/
#define gpio_hal_get_level(hal, gpio_num) gpio_ll_get_level((hal)->dev, gpio_num)
/**
* @brief Enable GPIO wake-up function.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number.
* @param intr_type GPIO wake-up type. Only GPIO_INTR_LOW_LEVEL or GPIO_INTR_HIGH_LEVEL can be used.
*/
#define gpio_hal_wakeup_enable(hal, gpio_num, intr_type) gpio_ll_wakeup_enable((hal)->dev, gpio_num, intr_type)
/**
* @brief Disable GPIO wake-up function.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number
*/
#define gpio_hal_wakeup_disable(hal, gpio_num) gpio_ll_wakeup_disable((hal)->dev, gpio_num)
/**
* @brief Set GPIO pad drive capability
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Drive capability of the pad
*/
#define gpio_hal_set_drive_capability(hal, gpio_num, strength) gpio_ll_set_drive_capability((hal)->dev, gpio_num, strength)
/**
* @brief Get GPIO pad drive capability
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number, only support output GPIOs
* @param strength Pointer to accept drive capability of the pad
*/
#define gpio_hal_get_drive_capability(hal, gpio_num, strength) gpio_ll_get_drive_capability((hal)->dev, gpio_num, strength)
/**
* @brief Enable gpio pad hold function.
*
* The gpio pad hold function works in both input and output modes, but must be output-capable gpios.
* If pad hold enabled:
* in output mode: the output level of the pad will be force locked and can not be changed.
* in input mode: the input value read will not change, regardless the changes of input signal.
*
* The state of digital gpio cannot be held during Deep-sleep, and it will resume the hold function
* when the chip wakes up from Deep-sleep. If the digital gpio also needs to be held during Deep-sleep,
* `gpio_deep_sleep_hold_en` should also be called.
*
* Power down or call gpio_hold_dis will disable this function.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number, only support output GPIOs
*/
#define gpio_hal_hold_en(hal, gpio_num) gpio_ll_hold_en((hal)->dev, gpio_num)
/**
* @brief Disable gpio pad hold function.
*
* When the chip is woken up from Deep-sleep, the gpio will be set to the default mode, so, the gpio will output
* the default level if this function is called. If you don't want the level changes, the gpio should be configured to
* a known state before this function is called.
* e.g.
* If you hold gpio18 high during Deep-sleep, after the chip is woken up and `gpio_hold_dis` is called,
* gpio18 will output low level(because gpio18 is input mode by default). If you don't want this behavior,
* you should configure gpio18 as output mode and set it to hight level before calling `gpio_hold_dis`.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number, only support output GPIOs
*/
#define gpio_hal_hold_dis(hal, gpio_num) gpio_ll_hold_dis((hal)->dev, gpio_num)
/**
* @brief Enable all digital gpio pad hold function during Deep-sleep.
*
* When the chip is in Deep-sleep mode, all digital gpio will hold the state before sleep, and when the chip is woken up,
* the status of digital gpio will not be held. Note that the pad hold feature only works when the chip is in Deep-sleep mode,
* when not in sleep mode, the digital gpio state can be changed even you have called this function.
*
* Power down or call gpio_hold_dis will disable this function, otherwise, the digital gpio hold feature works as long as the chip enter Deep-sleep.
*
* @param hal Context of the HAL layer
*/
#define gpio_hal_deep_sleep_hold_en(hal) gpio_ll_deep_sleep_hold_en((hal)->dev)
/**
* @brief Disable all digital gpio pad hold function during Deep-sleep.
*
* @param hal Context of the HAL layer
*/
#define gpio_hal_deep_sleep_hold_dis(hal) gpio_ll_deep_sleep_hold_dis((hal)->dev)
/**
* @brief Set pad input to a peripheral signal through the IOMUX.
*
* @param hal Context of the HAL layer
* @param gpio_num GPIO number of the pad.
* @param signal_idx Peripheral signal id to input. One of the ``*_IN_IDX`` signals in ``soc/gpio_sig_map.h``.
*/
#define gpio_hal_iomux_in(hal, gpio_num, signal_idx) gpio_ll_iomux_in((hal)->dev, gpio_num, signal_idx)
/**
* @brief Set peripheral output to an GPIO pad through the IOMUX.
*
* @param hal Context of the HAL layer
* @param gpio_num gpio_num GPIO number of the pad.
* @param func The function number of the peripheral pin to output pin.
* One of the ``FUNC_X_*`` of specified pin (X) in ``soc/io_mux_reg.h``.
* @param oen_inv True if the output enable needs to be inverted, otherwise False.
*/
#define gpio_hal_iomux_out(hal, gpio_num, func, oen_inv) gpio_ll_iomux_out((hal)->dev, gpio_num, func, oen_inv)
#ifdef __cplusplus
}
#endif

123
components/soc/include/hal/gpio_types.h
View File

@ -1,51 +1,86 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "soc/gpio_pins.h"
#include "soc/gpio_periph.h"
#include "soc/gpio_caps.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef int gpio_num_t;
typedef enum {
GPIO_NUM_NC = -1, /*!< Use to signal not connected to S/W */
GPIO_NUM_0 = 0, /*!< GPIO0, input and output */
GPIO_NUM_1 = 1, /*!< GPIO1, input and output */
GPIO_NUM_2 = 2, /*!< GPIO2, input and output
@note There are more enumerations like that
up to GPIO39, excluding GPIO20, GPIO24 and GPIO28..31.
They are not shown here to reduce redundant information.
@note GPIO34..39 are input mode only. */
/** @cond */
GPIO_NUM_3 = 3, /*!< GPIO3, input and output */
GPIO_NUM_4 = 4, /*!< GPIO4, input and output */
GPIO_NUM_5 = 5, /*!< GPIO5, input and output */
GPIO_NUM_6 = 6, /*!< GPIO6, input and output */
GPIO_NUM_7 = 7, /*!< GPIO7, input and output */
GPIO_NUM_8 = 8, /*!< GPIO8, input and output */
GPIO_NUM_9 = 9, /*!< GPIO9, input and output */
GPIO_NUM_10 = 10, /*!< GPIO10, input and output */
GPIO_NUM_11 = 11, /*!< GPIO11, input and output */
GPIO_NUM_12 = 12, /*!< GPIO12, input and output */
GPIO_NUM_13 = 13, /*!< GPIO13, input and output */
GPIO_NUM_14 = 14, /*!< GPIO14, input and output */
GPIO_NUM_15 = 15, /*!< GPIO15, input and output */
GPIO_NUM_16 = 16, /*!< GPIO16, input and output */
GPIO_NUM_17 = 17, /*!< GPIO17, input and output */
GPIO_NUM_18 = 18, /*!< GPIO18, input and output */
GPIO_NUM_19 = 19, /*!< GPIO19, input and output */
GPIO_INTR_DISABLE = 0, /*!< Disable GPIO interrupt */
GPIO_INTR_POSEDGE = 1, /*!< GPIO interrupt type : rising edge */
GPIO_INTR_NEGEDGE = 2, /*!< GPIO interrupt type : falling edge */
GPIO_INTR_ANYEDGE = 3, /*!< GPIO interrupt type : both rising and falling edge */
GPIO_INTR_LOW_LEVEL = 4, /*!< GPIO interrupt type : input low level trigger */
GPIO_INTR_HIGH_LEVEL = 5, /*!< GPIO interrupt type : input high level trigger */
GPIO_INTR_MAX,
} gpio_int_type_t;
GPIO_NUM_21 = 21, /*!< GPIO21, input and output */
GPIO_NUM_22 = 22, /*!< GPIO22, input and output */
GPIO_NUM_23 = 23, /*!< GPIO23, input and output */
typedef enum {
GPIO_MODE_DISABLE = GPIO_MODE_DEF_DISABLE, /*!< GPIO mode : disable input and output */
GPIO_MODE_INPUT = GPIO_MODE_DEF_INPUT, /*!< GPIO mode : input only */
GPIO_MODE_OUTPUT = GPIO_MODE_DEF_OUTPUT, /*!< GPIO mode : output only mode */
GPIO_MODE_OUTPUT_OD = ((GPIO_MODE_DEF_OUTPUT) | (GPIO_MODE_DEF_OD)), /*!< GPIO mode : output only with open-drain mode */
GPIO_MODE_INPUT_OUTPUT_OD = ((GPIO_MODE_DEF_INPUT) | (GPIO_MODE_DEF_OUTPUT) | (GPIO_MODE_DEF_OD)), /*!< GPIO mode : output and input with open-drain mode*/
GPIO_MODE_INPUT_OUTPUT = ((GPIO_MODE_DEF_INPUT) | (GPIO_MODE_DEF_OUTPUT)), /*!< GPIO mode : output and input mode */
} gpio_mode_t;
GPIO_NUM_25 = 25, /*!< GPIO25, input and output */
GPIO_NUM_26 = 26, /*!< GPIO26, input and output */
GPIO_NUM_27 = 27, /*!< GPIO27, input and output */
typedef enum {
GPIO_PULLUP_DISABLE = 0x0, /*!< Disable GPIO pull-up resistor */
GPIO_PULLUP_ENABLE = 0x1, /*!< Enable GPIO pull-up resistor */
} gpio_pullup_t;
GPIO_NUM_32 = 32, /*!< GPIO32, input and output */
GPIO_NUM_33 = 33, /*!< GPIO33, input and output */
GPIO_NUM_34 = 34, /*!< GPIO34, input mode only */
GPIO_NUM_35 = 35, /*!< GPIO35, input mode only */
GPIO_NUM_36 = 36, /*!< GPIO36, input mode only */
GPIO_NUM_37 = 37, /*!< GPIO37, input mode only */
GPIO_NUM_38 = 38, /*!< GPIO38, input mode only */
GPIO_NUM_39 = 39, /*!< GPIO39, input mode only */
GPIO_NUM_MAX = 40,
/** @endcond */
} gpio_num_t;
typedef enum {
GPIO_PULLDOWN_DISABLE = 0x0, /*!< Disable GPIO pull-down resistor */
GPIO_PULLDOWN_ENABLE = 0x1, /*!< Enable GPIO pull-down resistor */
} gpio_pulldown_t;
/**
* @brief Configuration parameters of GPIO pad for gpio_config function
*/
typedef struct {
uint64_t pin_bit_mask; /*!< GPIO pin: set with bit mask, each bit maps to a GPIO */
gpio_mode_t mode; /*!< GPIO mode: set input/output mode */
gpio_pullup_t pull_up_en; /*!< GPIO pull-up */
gpio_pulldown_t pull_down_en; /*!< GPIO pull-down */
gpio_int_type_t intr_type; /*!< GPIO interrupt type */
} gpio_config_t;
typedef enum {
GPIO_PULLUP_ONLY, /*!< Pad pull up */
GPIO_PULLDOWN_ONLY, /*!< Pad pull down */
GPIO_PULLUP_PULLDOWN, /*!< Pad pull up + pull down*/
GPIO_FLOATING, /*!< Pad floating */
} gpio_pull_mode_t;
typedef enum {
GPIO_DRIVE_CAP_0 = 0, /*!< Pad drive capability: weak */
GPIO_DRIVE_CAP_1 = 1, /*!< Pad drive capability: stronger */
GPIO_DRIVE_CAP_2 = 2, /*!< Pad drive capability: medium */
GPIO_DRIVE_CAP_DEFAULT = 2, /*!< Pad drive capability: medium */
GPIO_DRIVE_CAP_3 = 3, /*!< Pad drive capability: strongest */
GPIO_DRIVE_CAP_MAX,
} gpio_drive_cap_t;
typedef void (*gpio_isr_t)(void *);
#ifdef __cplusplus
}
#endif

6
components/soc/include/soc/gpio_periph.h
View File

@ -3,7 +3,7 @@
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
@ -14,10 +14,10 @@
#pragma once
#include "stdint.h"
#include "soc/gpio_pins.h"
#include "soc/io_mux_reg.h"
#include "soc/gpio_struct.h"
#include "soc/gpio_reg.h"
#include "soc/gpio_caps.h"
#include "soc/gpio_sig_map.h"
#ifdef __cplusplus
@ -27,6 +27,8 @@ extern "C"
extern const uint32_t GPIO_PIN_MUX_REG[GPIO_PIN_COUNT];
extern const uint32_t GPIO_HOLD_MASK[GPIO_PIN_COUNT];
#ifdef __cplusplus
}
#endif

2
components/soc/include/soc/rtc_periph.h
View File

@ -15,7 +15,7 @@
#pragma once
#include <stdint.h>
#include "rtc_io_periph.h"
#include "soc/gpio_pins.h"
#include "soc/gpio_caps.h"
#ifdef __cplusplus
extern "C"

40
components/soc/src/hal/gpio_hal.c Normal file
View File

@ -0,0 +1,40 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// The HAL layer for GPIO (common part)
#include "soc/soc.h"
#include "soc/gpio_periph.h"
#include "hal/gpio_hal.h"
#include "esp32/rom/gpio.h"
void gpio_hal_intr_enable_on_core(gpio_hal_context_t *hal, gpio_num_t gpio_num, uint32_t core_id)
{
if (gpio_num < 32) {
gpio_ll_clear_intr_status(hal->dev, BIT(gpio_num));
} else {
gpio_ll_clear_intr_status_high(hal->dev, BIT(gpio_num - 32));
}
gpio_ll_intr_enable_on_core(hal->dev, core_id, gpio_num);
}
void gpio_hal_intr_disable(gpio_hal_context_t *hal, gpio_num_t gpio_num)
{
gpio_ll_intr_disable(hal->dev, gpio_num);
if (gpio_num < 32) {
gpio_ll_clear_intr_status(hal->dev, BIT(gpio_num));
} else {
gpio_ll_clear_intr_status_high(hal->dev, BIT(gpio_num - 32));
}
}

1
docs/Doxyfile
View File

@ -113,6 +113,7 @@ INPUT = \
../../components/soc/include/hal/ledc_types.h \
../../components/soc/include/hal/i2c_types.h \
../../components/soc/include/hal/dac_types.h \
../../components/soc/include/hal/gpio_types.h \
../../components/soc/esp32/include/soc/adc_channel.h \
../../components/soc/esp32/include/soc/dac_channel.h \
../../components/soc/esp32/include/soc/touch_channel.h \