esp-idf/components/driver/Kconfig

156 lines
7.2 KiB
Plaintext
Raw Normal View History

menu "Driver Configurations"
orsource "./twai/Kconfig.twai"
menu "Legacy ADC Driver Configuration"
config ADC_DISABLE_DAC
depends on SOC_DAC_SUPPORTED
bool "Disable DAC when ADC2 is used on GPIO 25 and 26"
default y
help
If this is set, the ADC2 driver will disable the output of the DAC corresponding to the specified
channel. This is the default value.
For testing, disable this option so that we can measure the output of DAC by internal ADC.
config ADC_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
Whether to suppress the deprecation warnings when using legacy adc driver (driver/adc.h).
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
you can enable this option.
menu "Legacy ADC Calibration Configuration"
config ADC_CAL_EFUSE_TP_ENABLE
depends on IDF_TARGET_ESP32
bool "Use Two Point Values"
default "y"
help
Some ESP32s have Two Point calibration values burned into eFuse BLOCK3.
This option will allow the ADC calibration component to characterize the
ADC-Voltage curve using Two Point values if they are available.
config ADC_CAL_EFUSE_VREF_ENABLE
depends on IDF_TARGET_ESP32
bool "Use eFuse Vref"
default "y"
help
Some ESP32s have Vref burned into eFuse BLOCK0. This option will allow
the ADC calibration component to characterize the ADC-Voltage curve using
eFuse Vref if it is available.
config ADC_CAL_LUT_ENABLE
depends on IDF_TARGET_ESP32
bool "Use Lookup Tables"
default "y"
help
This option will allow the ADC calibration component to use Lookup Tables
to correct for non-linear behavior in 11db attenuation. Other attenuations
do not exhibit non-linear behavior hence will not be affected by this option.
config ADC_CALI_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
Whether to suppress the deprecation warnings when using legacy adc calibration
driver (esp_adc_cal.h).
If you want to continue using the legacy driver, and don't want to see related
deprecation warnings, you can enable this option.
endmenu # Legacy ADC Calibration Configuration
endmenu # Legacy ADC Driver Configuration
menu "Legacy DAC Driver Configurations"
depends on SOC_DAC_SUPPORTED
config DAC_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
Whether to suppress the deprecation warnings when using legacy dac driver (driver/dac.h).
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
you can enable this option.
endmenu # Legacy DAC Driver Configurations
menu "Legacy MCPWM Driver Configurations"
depends on SOC_MCPWM_SUPPORTED
config MCPWM_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
Whether to suppress the deprecation warnings when using legacy MCPWM driver (driver/mcpwm.h).
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
you can enable this option.
endmenu # Legacy MCPWM Driver Configurations
menu "Legacy Timer Group Driver Configurations"
depends on SOC_GPTIMER_SUPPORTED
config GPTIMER_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
Whether to suppress the deprecation warnings when using legacy timer group driver (driver/timer.h).
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
you can enable this option.
endmenu # Legacy Timer Group Driver Configurations
menu "Legacy RMT Driver Configurations"
depends on SOC_RMT_SUPPORTED
config RMT_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
Whether to suppress the deprecation warnings when using legacy rmt driver (driver/rmt.h).
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
you can enable this option.
endmenu # Legacy RMT Driver Configurations
menu "Legacy I2S Driver Configurations"
depends on SOC_I2S_SUPPORTED
config I2S_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
Whether to suppress the deprecation warnings when using legacy i2s driver (driver/i2s.h).
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
you can enable this option.
endmenu # Legacy I2S Driver Configurationss
menu "Legacy PCNT Driver Configurations"
depends on SOC_PCNT_SUPPORTED
config PCNT_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
whether to suppress the deprecation warnings when using legacy PCNT driver (driver/pcnt.h).
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
you can enable this option.
endmenu # Legacy PCNT Driver Configurationss
menu "Legacy SDM Driver Configurations"
depends on SOC_SDM_SUPPORTED
config SDM_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
whether to suppress the deprecation warnings when using legacy SDM driver (driver/sigmadelta.h).
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
you can enable this option.
endmenu # Legacy SDM Driver Configurationss
menu "Legacy Temperature Sensor Driver Configurations"
depends on SOC_TEMP_SENSOR_SUPPORTED
config TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN
bool "Suppress legacy driver deprecated warning"
default n
help
whether to suppress the deprecation warnings when using legacy temperature sensor driver
(driver/temp_sensor.h). If you want to continue using the legacy driver,
and don't want to see related deprecation warnings, you can enable this option.
endmenu # Legacy Temperature Sensor Driver Configurationss
2021-08-18 07:45:51 -04:00
endmenu # Driver configurations