esp-idf/examples/peripherals/adc/main/adc1_example_main.c

107 lines
3.3 KiB
C
Raw Normal View History

/* ADC1 Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <stdio.h>
#include <stdlib.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "driver/gpio.h"
#include "driver/adc.h"
#if CONFIG_IDF_TARGET_ESP32
#include "esp_adc_cal.h"
2019-06-20 04:13:47 -04:00
#endif
#define DEFAULT_VREF 1100 //Use adc2_vref_to_gpio() to obtain a better estimate
#define NO_OF_SAMPLES 64 //Multisampling
2019-06-20 04:13:47 -04:00
#if CONFIG_IDF_TARGET_ESP32
static esp_adc_cal_characteristics_t *adc_chars;
static const adc_channel_t channel = ADC_CHANNEL_6; //GPIO34 if ADC1, GPIO14 if ADC2
2020-01-16 22:47:08 -05:00
#elif CONFIG_IDF_TARGET_ESP32S2
2019-06-20 04:13:47 -04:00
static const adc_channel_t channel = ADC_CHANNEL_6; // GPIO7 if ADC1, GPIO17 if ADC2
2020-01-16 22:47:08 -05:00
#endif
static const adc_atten_t atten = ADC_ATTEN_DB_0;
static const adc_unit_t unit = ADC_UNIT_1;
2019-06-20 04:13:47 -04:00
#if CONFIG_IDF_TARGET_ESP32
static void check_efuse(void)
{
//Check TP is burned into eFuse
if (esp_adc_cal_check_efuse(ESP_ADC_CAL_VAL_EFUSE_TP) == ESP_OK) {
printf("eFuse Two Point: Supported\n");
} else {
printf("eFuse Two Point: NOT supported\n");
}
//Check Vref is burned into eFuse
if (esp_adc_cal_check_efuse(ESP_ADC_CAL_VAL_EFUSE_VREF) == ESP_OK) {
printf("eFuse Vref: Supported\n");
} else {
printf("eFuse Vref: NOT supported\n");
}
}
static void print_char_val_type(esp_adc_cal_value_t val_type)
{
if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) {
printf("Characterized using Two Point Value\n");
} else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) {
printf("Characterized using eFuse Vref\n");
} else {
printf("Characterized using Default Vref\n");
}
}
2019-06-20 04:13:47 -04:00
#endif
void app_main(void)
{
2019-06-20 04:13:47 -04:00
#if CONFIG_IDF_TARGET_ESP32
//Check if Two Point or Vref are burned into eFuse
check_efuse();
2019-06-20 04:13:47 -04:00
#endif
//Configure ADC
if (unit == ADC_UNIT_1) {
adc1_config_width(ADC_WIDTH_BIT_12);
adc1_config_channel_atten(channel, atten);
} else {
adc2_config_channel_atten((adc2_channel_t)channel, atten);
}
2019-06-20 04:13:47 -04:00
#if CONFIG_IDF_TARGET_ESP32
//Characterize ADC
adc_chars = calloc(1, sizeof(esp_adc_cal_characteristics_t));
esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, ADC_WIDTH_BIT_12, DEFAULT_VREF, adc_chars);
print_char_val_type(val_type);
2019-06-20 04:13:47 -04:00
#endif
//Continuously sample ADC1
while (1) {
uint32_t adc_reading = 0;
//Multisampling
for (int i = 0; i < NO_OF_SAMPLES; i++) {
if (unit == ADC_UNIT_1) {
adc_reading += adc1_get_raw((adc1_channel_t)channel);
} else {
int raw;
adc2_get_raw((adc2_channel_t)channel, ADC_WIDTH_BIT_12, &raw);
adc_reading += raw;
}
}
adc_reading /= NO_OF_SAMPLES;
2019-06-20 04:13:47 -04:00
#if CONFIG_IDF_TARGET_ESP32
//Convert adc_reading to voltage in mV
uint32_t voltage = esp_adc_cal_raw_to_voltage(adc_reading, adc_chars);
printf("Raw: %d\tVoltage: %dmV\n", adc_reading, voltage);
2020-01-16 22:47:08 -05:00
#elif CONFIG_IDF_TARGET_ESP32S2
printf("ADC%d CH%d Raw: %d\t\n", unit, channel, adc_reading);
2019-06-20 04:13:47 -04:00
#endif
vTaskDelay(pdMS_TO_TICKS(1000));
}
}