esp-idf/components/esp32/component.mk

#
# Component Makefile
#

#ifdef IS_BOOTLOADER_BUILD
CFLAGS += -DBOOTLOADER_BUILD
#endif

COMPONENT_SRCDIRS := . hwcrypto
LIBS := core rtc
ifdef CONFIG_PHY_ENABLED # BT || WIFI
LIBS += phy coexist
endif
ifdef CONFIG_WIFI_ENABLED
LIBS += net80211 pp wpa smartconfig coexist wps wpa2
endif

LINKER_SCRIPTS += esp32.common.ld esp32.rom.ld esp32.peripherals.ld

ifeq ("$(CONFIG_NEWLIB_NANO_FORMAT)","y")
LINKER_SCRIPTS += esp32.rom.nanofmt.ld
endif

ifndef CONFIG_SPI_FLASH_ROM_DRIVER_PATCH
LINKER_SCRIPTS += esp32.rom.spiflash.ld
endif

COMPONENT_ADD_LDFLAGS := -lesp32 \
                         $(COMPONENT_PATH)/libhal.a \
                         -L$(COMPONENT_PATH)/lib \
                         $(addprefix -l,$(LIBS)) \
                         -L $(COMPONENT_PATH)/ld \
                         -T esp32_out.ld \
                         $(addprefix -T ,$(LINKER_SCRIPTS))

ALL_LIB_FILES := $(patsubst %,$(COMPONENT_PATH)/lib/lib%.a,$(LIBS))

COMPONENT_SUBMODULES += lib

# final linking of project ELF depends on all binary libraries, and
# all linker scripts (except esp32_out.ld, as this is code generated here.)
COMPONENT_ADD_LINKER_DEPS := $(ALL_LIB_FILES) $(addprefix ld/,$(LINKER_SCRIPTS))

# Preprocess esp32.ld linker script into esp32_out.ld
#
# The library doesn't really depend on esp32_out.ld, but it
# saves us from having to add the target to a Makefile.projbuild
$(COMPONENT_LIBRARY): esp32_out.ld

esp32_out.ld: $(COMPONENT_PATH)/ld/esp32.ld ../include/sdkconfig.h
	$(CC) -I ../include -C -P -x c -E $< -o $@

COMPONENT_EXTRA_CLEAN := esp32_out.ld
Initial public version 2016-08-17 11:08:22 -04:00			`#`
			`# Component Makefile`
			`#`

component/esp32 : fix dualcore bug 1. When dual core cpu run access DPORT register, must do protection. 2. If access DPORT register, must use DPORT_REG_READ/DPORT_REG_WRITE and DPORT_XXX register operation macro. 2017-05-08 08:03:04 -04:00			`#ifdef IS_BOOTLOADER_BUILD`
			`CFLAGS += -DBOOTLOADER_BUILD`
			`#endif`

mbedtls: Use hardware accelerated AES, SHA, bignum 2016-09-08 05:41:43 -04:00			`COMPONENT_SRCDIRS := . hwcrypto`
soc: add source code of rtc_clk, rtc_pm 2017-04-11 03:44:43 -04:00			`LIBS := core rtc`
phyinit: Use PHY config to enable, don't need phy_get_romfunc_addr to init 2017-01-18 19:18:44 -05:00			`ifdef CONFIG_PHY_ENABLED # BT \|\| WIFI`
			`LIBS += phy coexist`
Build: Handle WiFi & BT enabled/disabled combos gracefully as possible If using WIFI_INIT_CONFIG_DEFAULT, error message will point out lack of WiFi. Otherwise linker errors on WiFi symbols should help give a clue as to what is broken. Piggy-backs on changes in !420, ref github #230 #237 2017-01-15 19:52:15 -05:00			`endif`
			`ifdef CONFIG_WIFI_ENABLED`
			`LIBS += net80211 pp wpa smartconfig coexist wps wpa2`
			`endif`
mbedtls: Use hardware accelerated AES, SHA, bignum 2016-09-08 05:41:43 -04:00
build system: Project ELF should depend on linker scripts, binary libraries TW#7816 2016-12-11 23:54:30 -05:00			`LINKER_SCRIPTS += esp32.common.ld esp32.rom.ld esp32.peripherals.ld`
ld: add ld for bt/trace, choose different ld by menuconfig 2016-08-19 06:45:49 -04:00
newlib: add "full" formatting support, add missing functions - add two versions of libc: libc.a and libc_nano.a. First one has full C99 formatting support, second one uses “nano” formatting functions available in ROM. - fix linker error for fmod, fmodf, atof, atoff - update tests 2016-11-07 05:43:29 -05:00			`ifeq ("$(CONFIG_NEWLIB_NANO_FORMAT)","y")`
build system: Project ELF should depend on linker scripts, binary libraries TW#7816 2016-12-11 23:54:30 -05:00			`LINKER_SCRIPTS += esp32.rom.nanofmt.ld`
newlib: add "full" formatting support, add missing functions - add two versions of libc: libc.a and libc_nano.a. First one has full C99 formatting support, second one uses “nano” formatting functions available in ROM. - fix linker error for fmod, fmodf, atof, atoff - update tests 2016-11-07 05:43:29 -05:00			`endif`

spi_flash: Fixed bug in SPI flash ROM driver to work with embedded flash chip 1) fixed SPI_read_status: added check for flash busy flag in matrix mode 2) fixed SPI_page_program: enable write before writing data to SPI FIFO 3) SPI flash ROM funcs replacement is controlled via menuconfig option 2017-03-09 02:29:00 -05:00			`ifndef CONFIG_SPI_FLASH_ROM_DRIVER_PATCH`
			`LINKER_SCRIPTS += esp32.rom.spiflash.ld`
			`endif`

Initial public version 2016-08-17 11:08:22 -04:00			`COMPONENT_ADD_LDFLAGS := -lesp32 \`
build system: Project ELF should depend on linker scripts, binary libraries TW#7816 2016-12-11 23:54:30 -05:00			`$(COMPONENT_PATH)/libhal.a \`
			`-L$(COMPONENT_PATH)/lib \`
			`$(addprefix -l,$(LIBS)) \`
			`-L $(COMPONENT_PATH)/ld \`
			`-T esp32_out.ld \`
			`$(addprefix -T ,$(LINKER_SCRIPTS))`
Initial public version 2016-08-17 11:08:22 -04:00
Make: Add some "magic" to try and pull git submodules if missing 2016-08-19 02:20:28 -04:00			`ALL_LIB_FILES := $(patsubst %,$(COMPONENT_PATH)/lib/lib%.a,$(LIBS))`

build system: Refactor SubmoduleCheck to work project-wide Required at project level because some components use header files in other components' submodules, and one component with a submodule (esptool.py) doesn't have or need a component.mk. 2016-11-15 19:12:48 -05:00			`COMPONENT_SUBMODULES += lib`
Make: Add some "magic" to try and pull git submodules if missing 2016-08-19 02:20:28 -04:00
build system: Project ELF should depend on linker scripts, binary libraries TW#7816 2016-12-11 23:54:30 -05:00			`# final linking of project ELF depends on all binary libraries, and`
			`# all linker scripts (except esp32_out.ld, as this is code generated here.)`
			`COMPONENT_ADD_LINKER_DEPS := $(ALL_LIB_FILES) $(addprefix ld/,$(LINKER_SCRIPTS))`
esp32: Pass memory layout linker script through C preprocessor C preprocessor is a bit icky, but with ULP we will have 3 possible variables influencing the memory layout and 9 linker scripts is too many! 2016-09-20 21:04:16 -04:00
			`# Preprocess esp32.ld linker script into esp32_out.ld`
			`#`
			`# The library doesn't really depend on esp32_out.ld, but it`
			`# saves us from having to add the target to a Makefile.projbuild`
			`$(COMPONENT_LIBRARY): esp32_out.ld`

			`esp32_out.ld: $(COMPONENT_PATH)/ld/esp32.ld ../include/sdkconfig.h`
			`$(CC) -I ../include -C -P -x c -E $< -o $@`

			`COMPONENT_EXTRA_CLEAN := esp32_out.ld`