esp-idf/components/esp_eth/component.mk

#
# Component Makefile
#
COMPONENT_ADD_INCLUDEDIRS := include
COMPONENT_SRCDIRS := src
COMPONENT_ADD_LDFRAGMENTS += linker.lf

ifndef CONFIG_ETH_USE_ESP32_EMAC
    COMPONENT_OBJEXCLUDE += src/esp_eth_mac_esp32.o
endif

ifndef CONFIG_ETH_SPI_ETHERNET_DM9051
    COMPONENT_OBJEXCLUDE += src/esp_eth_mac_dm9051.o src/esp_eth_phy_dm9051.o
endif

ifndef CONFIG_ETH_USE_OPENETH
    COMPONENT_OBJEXCLUDE += src/esp_eth_mac_openeth.o
endif
add esp_eth component 2019-04-10 04:24:50 -04:00			`#`
			`# Component Makefile`
			`#`
			`COMPONENT_ADD_INCLUDEDIRS := include`
			`COMPONENT_SRCDIRS := src`
			`COMPONENT_ADD_LDFRAGMENTS += linker.lf`

ethernet: can build without enable esp32 emac Closes https://github.com/espressif/esp-idf/issues/3770 2019-07-12 05:58:45 -04:00			`ifndef CONFIG_ETH_USE_ESP32_EMAC`
add esp_eth component 2019-04-10 04:24:50 -04:00			`COMPONENT_OBJEXCLUDE += src/esp_eth_mac_esp32.o`
			`endif`
ethernet: support dm9051 1. move resource allocation from xxx_init to xxx_new 2. fix enabling tx checksum insertion by mistake 3. iperf example: enlarge max arguments 4. add examples for spi-ethernet Closes https://github.com/espressif/esp-idf/issues/3715 Closes https://github.com/espressif/esp-idf/issues/3711 2019-06-25 07:36:56 -04:00
			`ifndef CONFIG_ETH_SPI_ETHERNET_DM9051`
			`COMPONENT_OBJEXCLUDE += src/esp_eth_mac_dm9051.o src/esp_eth_phy_dm9051.o`
			`endif`
ethernet: support OpenCores ethernet MAC OpenCores Ethernet MAC has a relatively simple interface, and is already supported in QEMU. This makes it a good candidate for enabling network support when running IDF apps in QEMU, compared to the relatively more complex task of writing a QEMU model of ESP32 EMAC. This driver is written with QEMU in mind: it does not implement or handle things that aren't implemented or handled in the QEMU model: error flags, error interrupts. The transmit part of the driver also assumes that the TX operation is done immediately when the TX descriptor is written (which is the case with QEMU), hence waiting for the TX operation to complete is not necessary. For simplicity, the driver assumes that the peripheral register occupy the same memory range as the ESP32 EMAC registers, and the same interrupt source number is used. 2019-10-01 12:50:34 -04:00
			`ifndef CONFIG_ETH_USE_OPENETH`
			`COMPONENT_OBJEXCLUDE += src/esp_eth_mac_openeth.o`
			`endif`