esp-idf/components/mbedtls/port/esp32/esp_bignum.c

742 lines
22 KiB
C
Raw Normal View History

/**
* \brief Multi-precision integer library, ESP32 hardware accelerated parts
*
* based on mbedTLS implementation
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* Additions Copyright (C) 2016, Espressif Systems (Shanghai) PTE Ltd
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*/
#include <stdio.h>
#include <string.h>
#include <malloc.h>
#include <limits.h>
#include <assert.h>
#include <stdlib.h>
#include <sys/param.h>
#include "esp32/rom/bigint.h"
#include "soc/hwcrypto_periph.h"
#include "esp_system.h"
#include "esp_log.h"
2019-03-26 04:30:43 -04:00
#include "esp_intr_alloc.h"
#include "esp_attr.h"
#include <mbedtls/bignum.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/semphr.h"
#include "driver/periph_ctrl.h"
/* Some implementation notes:
*
* - Naming convention x_words, y_words, z_words for number of words (limbs) used in a particular
* bignum. This number may be less than the size of the bignum
*
* - Naming convention hw_words for the hardware length of the operation. This number is always
* rounded up to a 512 bit multiple, and may be larger than any of the numbers involved in the
* calculation.
*
* - Timing behaviour of these functions will depend on the length of the inputs. This is fundamentally
* the same constraint as the software mbedTLS implementations, and relies on the same
* countermeasures (exponent blinding, etc) which are used in mbedTLS.
*/
static const __attribute__((unused)) char *TAG = "bignum";
#define ciL (sizeof(mbedtls_mpi_uint)) /* chars in limb */
#define biL (ciL << 3) /* bits in limb */
static _lock_t mpi_lock;
void esp_mpi_acquire_hardware( void )
{
/* newlib locks lazy initialize on ESP-IDF */
_lock_acquire(&mpi_lock);
/* Enable RSA hardware */
periph_module_enable(PERIPH_RSA_MODULE);
DPORT_REG_CLR_BIT(DPORT_RSA_PD_CTRL_REG, DPORT_RSA_PD);
while(DPORT_REG_READ(RSA_CLEAN_REG) != 1);
// Note: from enabling RSA clock to here takes about 1.3us
}
void esp_mpi_release_hardware( void )
{
DPORT_REG_SET_BIT(DPORT_RSA_PD_CTRL_REG, DPORT_RSA_PD);
/* Disable RSA hardware */
periph_module_disable(PERIPH_RSA_MODULE);
_lock_release(&mpi_lock);
}
/* Convert bit count to word count
*/
static inline size_t bits_to_words(size_t bits)
{
return (bits + 31) / 32;
}
/* Round up number of words to nearest
512 bit (16 word) block count.
*/
static inline size_t hardware_words(size_t words)
{
return (words + 0xF) & ~0xF;
}
/* Number of words used to hold 'mpi'.
Equivalent of bits_to_words(mbedtls_mpi_bitlen(mpi)), but uses less cycles if the
exact bit count is not needed.
Note that mpi->n (size of memory buffer) may be higher than this
number, if the high bits are mostly zeroes.
*/
static inline size_t word_length(const mbedtls_mpi *mpi)
{
for(size_t i = mpi->n; i > 0; i--) {
if( mpi->p[i - 1] != 0 ) {
return i;
}
}
return 0;
}
/* Copy mbedTLS MPI bignum 'mpi' to hardware memory block at 'mem_base'.
If hw_words is higher than the number of words in the bignum then
these additional words will be zeroed in the memory buffer.
*/
static inline void mpi_to_mem_block(uint32_t mem_base, const mbedtls_mpi *mpi, size_t hw_words)
{
uint32_t *pbase = (uint32_t *)mem_base;
uint32_t copy_words = hw_words < mpi->n ? hw_words : mpi->n;
/* Copy MPI data to memory block registers */
for (int i = 0; i < copy_words; i++) {
pbase[i] = mpi->p[i];
}
/* Zero any remaining memory block data */
for (int i = copy_words; i < hw_words; i++) {
pbase[i] = 0;
}
/* Note: not executing memw here, can do it before we start a bignum operation */
}
/* Read mbedTLS MPI bignum back from hardware memory block.
Reads num_words words from block.
Bignum 'x' should already be grown to at least num_words by caller (can be done while
calculation is in progress, to save some cycles)
*/
static inline void mem_block_to_mpi(mbedtls_mpi *x, uint32_t mem_base, int num_words)
{
assert(x->n >= num_words);
/* Copy data from memory block registers */
esp_dport_access_read_buffer(x->p, mem_base, num_words);
/* Zero any remaining limbs in the bignum, if the buffer is bigger
than num_words */
for(size_t i = num_words; i < x->n; i++) {
x->p[i] = 0;
}
}
/**
*
* There is a need for the value of integer N' such that B^-1(B-1)-N^-1N'=1,
* where B^-1(B-1) mod N=1. Actually, only the least significant part of
* N' is needed, hence the definition N0'=N' mod b. We reproduce below the
* simple algorithm from an article by Dusse and Kaliski to efficiently
* find N0' from N0 and b
*/
static mbedtls_mpi_uint modular_inverse(const mbedtls_mpi *M)
{
int i;
uint64_t t = 1;
uint64_t two_2_i_minus_1 = 2; /* 2^(i-1) */
uint64_t two_2_i = 4; /* 2^i */
uint64_t N = M->p[0];
for (i = 2; i <= 32; i++) {
if ((mbedtls_mpi_uint) N * t % two_2_i >= two_2_i_minus_1) {
t += two_2_i_minus_1;
}
two_2_i_minus_1 <<= 1;
two_2_i <<= 1;
}
return (mbedtls_mpi_uint)(UINT32_MAX - t + 1);
}
/* Calculate Rinv = RR^2 mod M, where:
*
* R = b^n where b = 2^32, n=num_words,
* R = 2^N (where N=num_bits)
* RR = R^2 = 2^(2*N) (where N=num_bits=num_words*32)
*
* This calculation is computationally expensive (mbedtls_mpi_mod_mpi)
* so caller should cache the result where possible.
*
* DO NOT call this function while holding esp_mpi_acquire_hardware().
*
*/
static int calculate_rinv(mbedtls_mpi *Rinv, const mbedtls_mpi *M, int num_words)
{
int ret;
size_t num_bits = num_words * 32;
mbedtls_mpi RR;
mbedtls_mpi_init(&RR);
MBEDTLS_MPI_CHK(mbedtls_mpi_set_bit(&RR, num_bits * 2, 1));
MBEDTLS_MPI_CHK(mbedtls_mpi_mod_mpi(Rinv, &RR, M));
cleanup:
mbedtls_mpi_free(&RR);
return ret;
}
/* Begin an RSA operation. op_reg specifies which 'START' register
to write to.
*/
static inline void start_op(uint32_t op_reg)
{
/* Clear interrupt status */
DPORT_REG_WRITE(RSA_INTERRUPT_REG, 1);
/* Note: above REG_WRITE includes a memw, so we know any writes
to the memory blocks are also complete. */
DPORT_REG_WRITE(op_reg, 1);
}
/* Wait for an RSA operation to complete.
*/
static inline void wait_op_complete(uint32_t op_reg)
{
while(DPORT_REG_READ(RSA_INTERRUPT_REG) != 1)
{ }
/* clear the interrupt */
DPORT_REG_WRITE(RSA_INTERRUPT_REG, 1);
}
/* Sub-stages of modulo multiplication/exponentiation operations */
inline static int modular_multiply_finish(mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, size_t hw_words, size_t z_words);
/* Z = (X * Y) mod M
Not an mbedTLS function
*/
int esp_mpi_mul_mpi_mod(mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, const mbedtls_mpi *M)
{
int ret;
size_t x_bits = mbedtls_mpi_bitlen(X);
size_t y_bits = mbedtls_mpi_bitlen(Y);
size_t m_bits = mbedtls_mpi_bitlen(M);
size_t z_bits = MIN(m_bits, x_bits + y_bits);
size_t x_words = bits_to_words(x_bits);
size_t y_words = bits_to_words(y_bits);
size_t m_words = bits_to_words(m_bits);
size_t z_words = bits_to_words(z_bits);
size_t hw_words = hardware_words(MAX(x_words, MAX(y_words, m_words))); /* longest operand */
mbedtls_mpi Rinv;
mbedtls_mpi_uint Mprime;
/* Calculate and load the first stage montgomery multiplication */
mbedtls_mpi_init(&Rinv);
MBEDTLS_MPI_CHK(calculate_rinv(&Rinv, M, hw_words));
Mprime = modular_inverse(M);
esp_mpi_acquire_hardware();
/* Load M, X, Rinv, Mprime (Mprime is mod 2^32) */
mpi_to_mem_block(RSA_MEM_M_BLOCK_BASE, M, hw_words);
mpi_to_mem_block(RSA_MEM_X_BLOCK_BASE, X, hw_words);
mpi_to_mem_block(RSA_MEM_RB_BLOCK_BASE, &Rinv, hw_words);
DPORT_REG_WRITE(RSA_M_DASH_REG, (uint32_t)Mprime);
/* "mode" register loaded with number of 512-bit blocks, minus 1 */
DPORT_REG_WRITE(RSA_MULT_MODE_REG, (hw_words / 16) - 1);
/* Execute first stage montgomery multiplication */
start_op(RSA_MULT_START_REG);
wait_op_complete(RSA_MULT_START_REG);
/* execute second stage */
ret = modular_multiply_finish(Z, X, Y, hw_words, z_words);
esp_mpi_release_hardware();
cleanup:
mbedtls_mpi_free(&Rinv);
return ret;
}
#if defined(MBEDTLS_MPI_EXP_MOD_ALT)
mbedtls: Add Montgomery exponentiation implementation (HAC 14.94) It gave us a better performance of RSA operations. (2~11 times) The old modexp implementation (Z = X ^ Y mod M) loaded all the data into the hw registers and was waiting for completion, but due to the hardware RSA implementation, the calculations always started with 4096 bit, which took a lot of time. Measurement results (measurements were made for keys: 2048, 3072 and 4096 bits) (Old) - Sliding-window exponentiation (HAC 14.85): keysize = 2048 bits RSA key operation (performance): public [93206 us], private [280189 us] keysize = 3072 bits RSA key operation (performance): public [293614 us], private [858157 us] keysize = 4096 bits RSA key operation (performance): public [653192 us], private [1912126 us] Instead (Old) - Sliding-window exponentiation (HAC 14.85) was implemented (New) - Montgomery exponentiation (HAC 14.94) which showed better performance on private and public keys. keysize = 2048 bits RSA key operation (performance): public [14504 us], private [149456 us] keysize = 3072 bits RSA key operation (performance): public [35073 us], private [392743 us] keysize = 4096 bits RSA key operation (performance): public [58650 us], private [787186 us] For this reason, the old implementation was removed and the MBEDTLS_HARDWARE_MPI option was turned on by default. Why the MPI_INTERRUPT option is removed: the old implementation used calculations on the hardware and it took a lot of time (10ms - 500ms). And in order not to stand idle while waiting for completion, an interrupt option was added. This made it possible to carry out other tasks during the calculation, and this one to block. The new method is free from such a drawback and the maximum duration of one RSA HW operation does not exceed 70us (usually 2-70 μs). This option is no longer needed. Closes: IDF-965
2019-10-19 06:03:18 -04:00
static int mont(mbedtls_mpi* Z, const mbedtls_mpi* X, const mbedtls_mpi* Y, const mbedtls_mpi* M,
mbedtls_mpi_uint Mprime,
size_t hw_words,
bool again)
{
// Note Z may be the same pointer as X or Y
int ret = 0;
// montgomery mult prepare
if (again == false) {
mpi_to_mem_block(RSA_MEM_M_BLOCK_BASE, M, hw_words);
DPORT_REG_WRITE(RSA_M_DASH_REG, Mprime);
DPORT_REG_WRITE(RSA_MULT_MODE_REG, hw_words / 16 - 1);
}
mpi_to_mem_block(RSA_MEM_X_BLOCK_BASE, X, hw_words);
mpi_to_mem_block(RSA_MEM_RB_BLOCK_BASE, Y, hw_words);
start_op(RSA_MULT_START_REG);
MBEDTLS_MPI_CHK( mbedtls_mpi_grow(Z, hw_words) );
wait_op_complete(RSA_MULT_START_REG);
/* Read back the result */
mem_block_to_mpi(Z, RSA_MEM_Z_BLOCK_BASE, hw_words);
/* from HAC 14.36 - 3. If Z >= M then Z = Z - M */
if (mbedtls_mpi_cmp_mpi(Z, M) >= 0) {
MBEDTLS_MPI_CHK(mbedtls_mpi_sub_mpi(Z, Z, M));
}
cleanup:
return ret;
}
/*
mbedtls: Add Montgomery exponentiation implementation (HAC 14.94) It gave us a better performance of RSA operations. (2~11 times) The old modexp implementation (Z = X ^ Y mod M) loaded all the data into the hw registers and was waiting for completion, but due to the hardware RSA implementation, the calculations always started with 4096 bit, which took a lot of time. Measurement results (measurements were made for keys: 2048, 3072 and 4096 bits) (Old) - Sliding-window exponentiation (HAC 14.85): keysize = 2048 bits RSA key operation (performance): public [93206 us], private [280189 us] keysize = 3072 bits RSA key operation (performance): public [293614 us], private [858157 us] keysize = 4096 bits RSA key operation (performance): public [653192 us], private [1912126 us] Instead (Old) - Sliding-window exponentiation (HAC 14.85) was implemented (New) - Montgomery exponentiation (HAC 14.94) which showed better performance on private and public keys. keysize = 2048 bits RSA key operation (performance): public [14504 us], private [149456 us] keysize = 3072 bits RSA key operation (performance): public [35073 us], private [392743 us] keysize = 4096 bits RSA key operation (performance): public [58650 us], private [787186 us] For this reason, the old implementation was removed and the MBEDTLS_HARDWARE_MPI option was turned on by default. Why the MPI_INTERRUPT option is removed: the old implementation used calculations on the hardware and it took a lot of time (10ms - 500ms). And in order not to stand idle while waiting for completion, an interrupt option was added. This made it possible to carry out other tasks during the calculation, and this one to block. The new method is free from such a drawback and the maximum duration of one RSA HW operation does not exceed 70us (usually 2-70 μs). This option is no longer needed. Closes: IDF-965
2019-10-19 06:03:18 -04:00
* Return the most significant one-bit.
*/
static size_t mbedtls_mpi_msb( const mbedtls_mpi* X )
{
int i, j;
if (X != NULL && X->n != 0) {
for (i = X->n - 1; i >= 0; i--) {
if (X->p[i] != 0) {
for (j = biL - 1; j >= 0; j--) {
if ((X->p[i] & (1 << j)) != 0) {
return (i * biL) + j;
}
}
}
}
}
return 0;
}
/*
* Montgomery exponentiation: Z = X ^ Y mod M (HAC 14.94)
*/
static int mpi_montgomery_exp_calc( mbedtls_mpi* Z, const mbedtls_mpi* X, const mbedtls_mpi* Y, const mbedtls_mpi* M,
mbedtls_mpi* Rinv,
size_t hw_words,
mbedtls_mpi_uint Mprime )
{
int ret = 0;
mbedtls_mpi X_, one;
mbedtls_mpi_init(&X_);
mbedtls_mpi_init(&one);
if( ( ( ret = mbedtls_mpi_grow(&one, hw_words) ) != 0 ) ||
( ( ret = mbedtls_mpi_set_bit(&one, 0, 1) ) != 0 ) ) {
goto cleanup2;
}
// Algorithm from HAC 14.94
{
// 0 determine t (highest bit set in y)
int t = mbedtls_mpi_msb(Y);
esp_mpi_acquire_hardware();
// 1.1 x_ = mont(x, R^2 mod m)
// = mont(x, rb)
MBEDTLS_MPI_CHK( mont(&X_, X, Rinv, M, Mprime, hw_words, false) );
// 1.2 z = R mod m
// now z = R mod m = Mont (R^2 mod m, 1) mod M (as Mont(x) = X&R^-1 mod M)
MBEDTLS_MPI_CHK( mont(Z, Rinv, &one, M, Mprime, hw_words, true) );
// 2 for i from t down to 0
for (int i = t; i >= 0; i--) {
// 2.1 z = mont(z,z)
if (i != t) { // skip on the first iteration as is still unity
MBEDTLS_MPI_CHK( mont(Z, Z, Z, M, Mprime, hw_words, true) );
}
// 2.2 if y[i] = 1 then z = mont(A, x_)
if (mbedtls_mpi_get_bit(Y, i)) {
MBEDTLS_MPI_CHK( mont(Z, Z, &X_, M, Mprime, hw_words, true) );
}
}
// 3 z = Mont(z, 1)
MBEDTLS_MPI_CHK( mont(Z, Z, &one, M, Mprime, hw_words, true) );
}
cleanup:
mbedtls_mpi_free(&X_);
mbedtls_mpi_free(&one);
esp_mpi_release_hardware();
return ret;
cleanup2:
mbedtls_mpi_free(&one);
return ret;
}
/*
* Z = X ^ Y mod M
*
* _Rinv is optional pre-calculated version of Rinv (via calculate_rinv()).
*
* (See RSA Accelerator section in Technical Reference for more about Mprime, Rinv)
*
*/
int mbedtls_mpi_exp_mod( mbedtls_mpi* Z, const mbedtls_mpi* X, const mbedtls_mpi* Y, const mbedtls_mpi* M, mbedtls_mpi* _Rinv )
{
int ret = 0;
size_t x_words = word_length(X);
size_t y_words = word_length(Y);
size_t m_words = word_length(M);
/* "all numbers must be the same length", so choose longest number
as cardinal length of operation...
*/
size_t hw_words = hardware_words(MAX(m_words, MAX(x_words, y_words)));
mbedtls_mpi Rinv_new; /* used if _Rinv == NULL */
mbedtls_mpi *Rinv; /* points to _Rinv (if not NULL) othwerwise &RR_new */
mbedtls_mpi_uint Mprime;
if (mbedtls_mpi_cmp_int(M, 0) <= 0 || (M->p[0] & 1) == 0) {
return MBEDTLS_ERR_MPI_BAD_INPUT_DATA;
}
if (mbedtls_mpi_cmp_int(Y, 0) < 0) {
return MBEDTLS_ERR_MPI_BAD_INPUT_DATA;
}
if (mbedtls_mpi_cmp_int(Y, 0) == 0) {
return mbedtls_mpi_lset(Z, 1);
}
if (hw_words * 32 > 4096) {
return MBEDTLS_ERR_MPI_NOT_ACCEPTABLE;
}
/* Determine RR pointer, either _RR for cached value
or local RR_new */
if (_Rinv == NULL) {
mbedtls_mpi_init(&Rinv_new);
Rinv = &Rinv_new;
} else {
Rinv = _Rinv;
}
if (Rinv->p == NULL) {
MBEDTLS_MPI_CHK(calculate_rinv(Rinv, M, hw_words));
}
Mprime = modular_inverse(M);
mbedtls: Add Montgomery exponentiation implementation (HAC 14.94) It gave us a better performance of RSA operations. (2~11 times) The old modexp implementation (Z = X ^ Y mod M) loaded all the data into the hw registers and was waiting for completion, but due to the hardware RSA implementation, the calculations always started with 4096 bit, which took a lot of time. Measurement results (measurements were made for keys: 2048, 3072 and 4096 bits) (Old) - Sliding-window exponentiation (HAC 14.85): keysize = 2048 bits RSA key operation (performance): public [93206 us], private [280189 us] keysize = 3072 bits RSA key operation (performance): public [293614 us], private [858157 us] keysize = 4096 bits RSA key operation (performance): public [653192 us], private [1912126 us] Instead (Old) - Sliding-window exponentiation (HAC 14.85) was implemented (New) - Montgomery exponentiation (HAC 14.94) which showed better performance on private and public keys. keysize = 2048 bits RSA key operation (performance): public [14504 us], private [149456 us] keysize = 3072 bits RSA key operation (performance): public [35073 us], private [392743 us] keysize = 4096 bits RSA key operation (performance): public [58650 us], private [787186 us] For this reason, the old implementation was removed and the MBEDTLS_HARDWARE_MPI option was turned on by default. Why the MPI_INTERRUPT option is removed: the old implementation used calculations on the hardware and it took a lot of time (10ms - 500ms). And in order not to stand idle while waiting for completion, an interrupt option was added. This made it possible to carry out other tasks during the calculation, and this one to block. The new method is free from such a drawback and the maximum duration of one RSA HW operation does not exceed 70us (usually 2-70 μs). This option is no longer needed. Closes: IDF-965
2019-10-19 06:03:18 -04:00
// Montgomery exponentiation: Z = X ^ Y mod M (HAC 14.94)
MBEDTLS_MPI_CHK( mpi_montgomery_exp_calc(Z, X, Y, M, Rinv, hw_words, Mprime) );
// Compensate for negative X
if (X->s == -1 && (Y->p[0] & 1) != 0) {
Z->s = -1;
MBEDTLS_MPI_CHK(mbedtls_mpi_add_mpi(Z, M, Z));
} else {
Z->s = 1;
}
cleanup:
if (_Rinv == NULL) {
mbedtls_mpi_free(&Rinv_new);
}
return ret;
}
#endif /* MBEDTLS_MPI_EXP_MOD_ALT */
/* Second & final step of a modular multiply - load second multiplication
* factor Y, run the operation (modular inverse), read back the result
* into Z.
*
* Called from both mbedtls_mpi_exp_mod and mbedtls_mpi_mod_mpi.
*
* @param Z result value
* @param X first multiplication factor (used to set sign of result).
* @param Y second multiplication factor.
* @param hw_words Size of the hardware operation, in words
* @param z_words Size of the expected result, in words (may be less than hw_words).
* Z will be grown to at least this length.
*
* Caller must have already called esp_mpi_acquire_hardware().
*/
static int modular_multiply_finish(mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, size_t hw_words, size_t z_words)
{
int ret = 0;
/* Load Y to X input memory block, rerun */
mpi_to_mem_block(RSA_MEM_X_BLOCK_BASE, Y, hw_words);
start_op(RSA_MULT_START_REG);
MBEDTLS_MPI_CHK( mbedtls_mpi_grow(Z, z_words) );
wait_op_complete(RSA_MULT_START_REG);
mem_block_to_mpi(Z, RSA_MEM_Z_BLOCK_BASE, z_words);
Z->s = X->s * Y->s;
cleanup:
return ret;
}
#if defined(MBEDTLS_MPI_MUL_MPI_ALT) /* MBEDTLS_MPI_MUL_MPI_ALT */
static int mpi_mult_mpi_failover_mod_mult(mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, size_t z_words);
static int mpi_mult_mpi_overlong(mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, size_t Y_bits, size_t z_words);
/* Z = X * Y */
int mbedtls_mpi_mul_mpi( mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y )
{
int ret = 0;
size_t x_bits = mbedtls_mpi_bitlen(X);
size_t y_bits = mbedtls_mpi_bitlen(Y);
size_t x_words = bits_to_words(x_bits);
size_t y_words = bits_to_words(y_bits);
size_t z_words = bits_to_words(x_bits + y_bits);
size_t hw_words = hardware_words(MAX(x_words, y_words)); // length of one operand in hardware
/* Short-circuit eval if either argument is 0 or 1.
This is needed as the mpi modular division
argument will sometimes call in here when one
argument is too large for the hardware unit, but the other
argument is zero or one.
*/
if (x_bits == 0 || y_bits == 0) {
mbedtls_mpi_lset(Z, 0);
return 0;
}
if (x_bits == 1) {
2017-10-27 20:47:00 -04:00
ret = mbedtls_mpi_copy(Z, Y);
Z->s *= X->s;
return ret;
}
if (y_bits == 1) {
2017-10-27 20:47:00 -04:00
ret = mbedtls_mpi_copy(Z, X);
Z->s *= Y->s;
return ret;
}
/* If either factor is over 2048 bits, we can't use the standard hardware multiplier
(it assumes result is double longest factor, and result is max 4096 bits.)
However, we can fail over to mod_mult for up to 4096 bits of result (modulo
multiplication doesn't have the same restriction, so result is simply the
number of bits in X plus number of bits in in Y.)
*/
if (hw_words * 32 > 2048) {
if (z_words * 32 <= 4096) {
/* Note: it's possible to use mpi_mult_mpi_overlong
for this case as well, but it's very slightly
slower and requires a memory allocation.
*/
return mpi_mult_mpi_failover_mod_mult(Z, X, Y, z_words);
} else {
/* Still too long for the hardware unit... */
if(y_words > x_words) {
return mpi_mult_mpi_overlong(Z, X, Y, y_words, z_words);
} else {
return mpi_mult_mpi_overlong(Z, Y, X, x_words, z_words);
}
}
}
/* Otherwise, we can use the (faster) multiply hardware unit */
esp_mpi_acquire_hardware();
/* Copy X (right-extended) & Y (left-extended) to memory block */
mpi_to_mem_block(RSA_MEM_X_BLOCK_BASE, X, hw_words);
mpi_to_mem_block(RSA_MEM_Z_BLOCK_BASE + hw_words * 4, Y, hw_words);
/* NB: as Y is left-extended, we don't zero the bottom words_mult words of Y block.
This is OK for now because zeroing is done by hardware when we do esp_mpi_acquire_hardware().
*/
DPORT_REG_WRITE(RSA_M_DASH_REG, 0);
/* "mode" register loaded with number of 512-bit blocks in result,
plus 7 (for range 9-12). (this is ((N~ / 32) - 1) + 8))
*/
DPORT_REG_WRITE(RSA_MULT_MODE_REG, ((hw_words * 2) / 16) + 7);
start_op(RSA_MULT_START_REG);
MBEDTLS_MPI_CHK( mbedtls_mpi_grow(Z, z_words) );
wait_op_complete(RSA_MULT_START_REG);
/* Read back the result */
mem_block_to_mpi(Z, RSA_MEM_Z_BLOCK_BASE, z_words);
Z->s = X->s * Y->s;
cleanup:
esp_mpi_release_hardware();
return ret;
}
/* Special-case of mbedtls_mpi_mult_mpi(), where we use hardware montgomery mod
multiplication to calculate an mbedtls_mpi_mult_mpi result where either
A or B are >2048 bits so can't use the standard multiplication method.
Result (z_words, based on A bits + B bits) must still be less than 4096 bits.
This case is simpler than the general case modulo multiply of
esp_mpi_mul_mpi_mod() because we can control the other arguments:
* Modulus is chosen with M=(2^num_bits - 1) (ie M=R-1), so output
isn't actually modulo anything.
* Mprime and Rinv are therefore predictable as follows:
Mprime = 1
Rinv = 1
(See RSA Accelerator section in Technical Reference for more about Mprime, Rinv)
*/
static int mpi_mult_mpi_failover_mod_mult(mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, size_t z_words)
{
int ret = 0;
size_t hw_words = hardware_words(z_words);
/* Load coefficients to hardware */
esp_mpi_acquire_hardware();
/* M = 2^num_words - 1, so block is entirely FF */
for(int i = 0; i < hw_words; i++) {
DPORT_REG_WRITE(RSA_MEM_M_BLOCK_BASE + i * 4, UINT32_MAX);
}
/* Mprime = 1 */
DPORT_REG_WRITE(RSA_M_DASH_REG, 1);
/* "mode" register loaded with number of 512-bit blocks, minus 1 */
DPORT_REG_WRITE(RSA_MULT_MODE_REG, (hw_words / 16) - 1);
/* Load X */
mpi_to_mem_block(RSA_MEM_X_BLOCK_BASE, X, hw_words);
/* Rinv = 1 */
DPORT_REG_WRITE(RSA_MEM_RB_BLOCK_BASE, 1);
for(int i = 1; i < hw_words; i++) {
DPORT_REG_WRITE(RSA_MEM_RB_BLOCK_BASE + i * 4, 0);
}
start_op(RSA_MULT_START_REG);
wait_op_complete(RSA_MULT_START_REG);
/* finish the modular multiplication */
ret = modular_multiply_finish(Z, X, Y, hw_words, z_words);
esp_mpi_release_hardware();
return ret;
}
/* Deal with the case when X & Y are too long for the hardware unit, by splitting one operand
into two halves.
Y must be the longer operand
Slice Y into Yp, Ypp such that:
Yp = lower 'b' bits of Y
Ypp = upper 'b' bits of Y (right shifted)
Such that
Z = X * Y
Z = X * (Yp + Ypp<<b)
Z = (X * Yp) + (X * Ypp<<b)
Note that this function may recurse multiple times, if both X & Y
are too long for the hardware multiplication unit.
*/
static int mpi_mult_mpi_overlong(mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, size_t y_words, size_t z_words)
{
int ret = 0;
mbedtls_mpi Ztemp;
/* Rather than slicing in two on bits we slice on limbs (32 bit words) */
const size_t words_slice = y_words / 2;
/* Yp holds lower bits of Y (declared to reuse Y's array contents to save on copying) */
const mbedtls_mpi Yp = {
.p = Y->p,
.n = words_slice,
.s = Y->s
};
/* Ypp holds upper bits of Y, right shifted (also reuses Y's array contents) */
const mbedtls_mpi Ypp = {
.p = Y->p + words_slice,
.n = y_words - words_slice,
.s = Y->s
};
mbedtls_mpi_init(&Ztemp);
/* Grow Z to result size early, avoid interim allocations */
mbedtls_mpi_grow(Z, z_words);
/* Get result Ztemp = Yp * X (need temporary variable Ztemp) */
MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi(&Ztemp, X, &Yp) );
/* Z = Ypp * Y */
MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi(Z, X, &Ypp) );
/* Z = Z << b */
MBEDTLS_MPI_CHK( mbedtls_mpi_shift_l(Z, words_slice * 32) );
/* Z += Ztemp */
MBEDTLS_MPI_CHK( mbedtls_mpi_add_mpi(Z, Z, &Ztemp) );
cleanup:
mbedtls_mpi_free(&Ztemp);
return ret;
}
#endif /* MBEDTLS_MPI_MUL_MPI_ALT */