esp-idf/components/hal/component.mk

COMPONENT_SRCDIRS := . esp32
COMPONENT_ADD_INCLUDEDIRS := esp32/include include platform_port/include
COMPONENT_ADD_LDFRAGMENTS += linker.lf

COMPONENT_OBJEXCLUDE += ./spi_slave_hd_hal.o ./spi_flash_hal_gpspi.o ./spi_slave_hd_hal.o ./ds_hal.o ./gdma_hal.o ./lcd_hal.o ./systimer_hal.o ./usb_hal.o ./usbh_hal.o ./xt_wdt_hal.o

ifndef CONFIG_ETH_USE_ESP32_EMAC
    COMPONENT_OBJEXCLUDE += ./emac_hal.o
endif

ifdef IS_BOOTLOADER_BUILD
    COMPONENT_OBJEXCLUDE += ./emac_hal.o
endif
hal: extract hal component from soc component 2020-08-08 08:15:27 -04:00			`COMPONENT_SRCDIRS := . esp32`
hal: added HAL_ASSERT 2021-05-18 22:53:21 -04:00			`COMPONENT_ADD_INCLUDEDIRS := esp32/include include platform_port/include`
hal: extract hal component from soc component 2020-08-08 08:15:27 -04:00			`COMPONENT_ADD_LDFRAGMENTS += linker.lf`

WDT: Add support for XTAL32K Watchdog timer 2021-08-29 23:30:12 -04:00			`COMPONENT_OBJEXCLUDE += ./spi_slave_hd_hal.o ./spi_flash_hal_gpspi.o ./spi_slave_hd_hal.o ./ds_hal.o ./gdma_hal.o ./lcd_hal.o ./systimer_hal.o ./usb_hal.o ./usbh_hal.o ./xt_wdt_hal.o`
hal: extract hal component from soc component 2020-08-08 08:15:27 -04:00
			`ifndef CONFIG_ETH_USE_ESP32_EMAC`
hal/emac_hal: refactord emac_hal 2021-05-07 05:38:36 -04:00			`COMPONENT_OBJEXCLUDE += ./emac_hal.o`
hal: extract hal component from soc component 2020-08-08 08:15:27 -04:00			`endif`
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3 When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible to set pins 18 and 19 as GPIOs. This commit solves this by manually disabling USB JTAG when using pins 18 or 19. The functions shall use `gpio_hal_iomux_func_sel` instead of `PIN_FUNC_SELELECT`. 2021-03-15 22:55:05 -04:00
			`ifdef IS_BOOTLOADER_BUILD`
hal/emac_hal: refactord emac_hal 2021-05-07 05:38:36 -04:00			`COMPONENT_OBJEXCLUDE += ./emac_hal.o`
gpio: Disable USB JTAG when setting pins 18 and 19 as GPIOs on ESP32C3 When `DIS_USB_JTAG` eFuse is NOT burned (`False`), it is not possible to set pins 18 and 19 as GPIOs. This commit solves this by manually disabling USB JTAG when using pins 18 or 19. The functions shall use `gpio_hal_iomux_func_sel` instead of `PIN_FUNC_SELELECT`. 2021-03-15 22:55:05 -04:00			`endif`