esp-idf/components/hal/linker.lf

[mapping:hal]
archive: libhal.a
entries:
    if APP_BUILD_TYPE_PURE_RAM_APP = n:
        mmu_hal (noflash)
        spi_flash_hal_iram (noflash)
        spi_flash_encrypt_hal_iram (noflash)
        if IDF_TARGET_ESP32 = y:
            cache_hal_esp32 (noflash)
        else:
            cache_hal (noflash)
    if SOC_GPSPI_SUPPORTED = y:
        if HAL_SPI_MASTER_FUNC_IN_IRAM = y:
            spi_hal_iram (noflash)
        if HAL_SPI_SLAVE_FUNC_IN_IRAM = y:
            spi_slave_hal_iram (noflash)
    if UART_ISR_IN_IRAM = y || ESP_PANIC_HANDLER_IRAM = y:
        uart_hal_iram (noflash)
    else:
        uart_hal_iram (default)
    if SOC_LEDC_SUPPORTED = y:
        ledc_hal_iram (noflash)
    if SOC_I2C_SUPPORTED = y:
        i2c_hal_iram (noflash)
    if HAL_WDT_USE_ROM_IMPL = n:
        wdt_hal_iram (noflash)
    if SOC_SYSTIMER_SUPPORTED = y && HAL_SYSTIMER_USE_ROM_IMPL = n:
        systimer_hal (noflash)
    if TWAI_ISR_IN_IRAM = y:
        twai_hal_iram (noflash)
    if IDF_TARGET_ESP32 = n:
        spi_flash_hal_gpspi (noflash)
    if GPIO_CTRL_FUNC_IN_IRAM = y:
        gpio_hal: gpio_hal_intr_disable (noflash)
    if ADC_ONESHOT_CTRL_FUNC_IN_IRAM = y:
        adc_oneshot_hal (noflash)
        if COMPILER_OPTIMIZATION_DEBUG = y:
            adc_hal_common: get_controller (noflash)
        adc_hal_common: adc_hal_set_controller (noflash)
        if SOC_ADC_ARBITER_SUPPORTED = y:
            adc_hal_common: adc_hal_arbiter_config (noflash)
        if SOC_ADC_CALIBRATION_V1_SUPPORTED = y:
            adc_hal_common: adc_hal_set_calibration_param (noflash)
            adc_hal_common: adc_hal_calibration_init (noflash)
    if ADC_CONTINUOUS_ISR_IRAM_SAFE = y:
        adc_hal: adc_hal_get_reading_result (noflash)
        adc_hal: adc_hal_digi_start (noflash)
        if COMPILER_OPTIMIZATION_DEBUG = y:
            adc_hal: adc_hal_digi_dma_link_descriptors (noflash)
        adc_hal: adc_hal_digi_stop (noflash)
        if IDF_TARGET_ESP32 = y || IDF_TARGET_ESP32S2 = y:
            adc_hal: adc_hal_check_event (noflash)
            adc_hal: adc_hal_digi_clr_intr (noflash)
            adc_hal: adc_hal_get_desc_addr (noflash)
hal: extract hal component from soc component 2020-08-08 08:15:27 -04:00			`[mapping:hal]`
			`archive: libhal.a`
			`entries:`
feature: add ram loadable app support 2023-01-30 05:03:41 -05:00			`if APP_BUILD_TYPE_PURE_RAM_APP = n:`
			`mmu_hal (noflash)`
			`spi_flash_hal_iram (noflash)`
			`spi_flash_encrypt_hal_iram (noflash)`
cache: refactor cache_utils into cache_hal instade 2023-06-12 23:56:14 -04:00			`if IDF_TARGET_ESP32 = y:`
			`cache_hal_esp32 (noflash)`
			`else:`
			`cache_hal (noflash)`
ESP32H2: Introduce new chip target esp32h2, hello_world example supported 2022-12-28 22:01:13 -05:00			`if SOC_GPSPI_SUPPORTED = y:`
spi: change linker file let spi hal able to out from iram 2023-04-02 23:01:12 -04:00			`if HAL_SPI_MASTER_FUNC_IN_IRAM = y:`
			`spi_hal_iram (noflash)`
			`if HAL_SPI_SLAVE_FUNC_IN_IRAM = y:`
			`spi_slave_hal_iram (noflash)`
panic: handlers can now be placed in flash By unchecking "Place panic handler code in IRAM" in the menuconfig, the panic handlers will be placed in flash. Of course, flash cache must be activated when entering panic handlers. 2021-03-24 00:11:07 -04:00			`if UART_ISR_IN_IRAM = y \|\| ESP_PANIC_HANDLER_IRAM = y:`
hal: extract hal component from soc component 2020-08-08 08:15:27 -04:00			`uart_hal_iram (noflash)`
			`else:`
			`uart_hal_iram (default)`
soc_caps: Introduce SOC_LEDC_SUPPORTED and SOC_I2C_SUPPORTED caps to IDF Wrap the ledc, i2c source files with the new caps in CMakeLists and linker.lf. This could avoid potential source file not found warning during linking time. 2022-08-31 08:12:24 -04:00			`if SOC_LEDC_SUPPORTED = y:`
			`ledc_hal_iram (noflash)`
			`if SOC_I2C_SUPPORTED = y:`
			`i2c_hal_iram (noflash)`
hal: use ROM implementation for systimer and wdt on esp32c2 2022-05-06 06:57:14 -04:00			`if HAL_WDT_USE_ROM_IMPL = n:`
hal: use WDT HAL IMPL in ESP32C2 ROM 2022-04-16 03:06:40 -04:00			`wdt_hal_iram (noflash)`
hal: use ROM implementation for systimer and wdt on esp32c2 2022-05-06 06:57:14 -04:00			`if SOC_SYSTIMER_SUPPORTED = y && HAL_SYSTIMER_USE_ROM_IMPL = n:`
			`systimer_hal (noflash)`
hal: fix CONFIG_TWAI_ISR_IN_IRAM not taking effect for C3/H2 2022-01-20 16:24:27 -05:00			`if TWAI_ISR_IN_IRAM = y:`
			`twai_hal_iram (noflash)`
components: fix ldgen check errors 2021-01-13 07:05:57 -05:00			`if IDF_TARGET_ESP32 = n:`
			`spi_flash_hal_gpspi (noflash)`
gpio: Clean up unit tests and enable ci ut on some previously disabled test cases Eliminate UT_T1_GPIO runner requirement by routing internally through gpio matrix and by setting gpio pins to GPIO_MODE_INPUT_OUTPUT mode for all interrupt related test cases. 2022-03-09 01:37:41 -05:00			`if GPIO_CTRL_FUNC_IN_IRAM = y:`
			`gpio_hal: gpio_hal_intr_disable (noflash)`
esp_adc: new esp_adc component and adc drivers 2022-07-15 00:52:44 -04:00			`if ADC_ONESHOT_CTRL_FUNC_IN_IRAM = y:`
			`adc_oneshot_hal (noflash)`
core-system: changed CONFIG_COMPILER_OPTIMIZATION_DEFAULT to CONFIG_COMPILER_OPTIMIZATION_DEBUG DEBUG is more descriptive and is consistent with the name used in the bootloader: CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG Closes https://github.com/espressif/esp-idf/issues/8404 2023-06-02 03:16:50 -04:00			`if COMPILER_OPTIMIZATION_DEBUG = y:`
adc: skip linking static functions when not COMPILER_OPTIMIZATION_DEFAULT 2022-08-28 23:42:36 -04:00			`adc_hal_common: get_controller (noflash)`
esp_adc: new esp_adc component and adc drivers 2022-07-15 00:52:44 -04:00			`adc_hal_common: adc_hal_set_controller (noflash)`
esp_adc: add test with -O0 2022-08-02 05:53:32 -04:00			`if SOC_ADC_ARBITER_SUPPORTED = y:`
			`adc_hal_common: adc_hal_arbiter_config (noflash)`
			`if SOC_ADC_CALIBRATION_V1_SUPPORTED = y:`
			`adc_hal_common: adc_hal_set_calibration_param (noflash)`
			`adc_hal_common: adc_hal_calibration_init (noflash)`
esp_adc: new esp_adc component and adc drivers 2022-07-15 00:52:44 -04:00			`if ADC_CONTINUOUS_ISR_IRAM_SAFE = y:`
			`adc_hal: adc_hal_get_reading_result (noflash)`
			`adc_hal: adc_hal_digi_start (noflash)`
core-system: changed CONFIG_COMPILER_OPTIMIZATION_DEFAULT to CONFIG_COMPILER_OPTIMIZATION_DEBUG DEBUG is more descriptive and is consistent with the name used in the bootloader: CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG Closes https://github.com/espressif/esp-idf/issues/8404 2023-06-02 03:16:50 -04:00			`if COMPILER_OPTIMIZATION_DEBUG = y:`
adc: skip linking static functions when not COMPILER_OPTIMIZATION_DEFAULT 2022-08-28 23:42:36 -04:00			`adc_hal: adc_hal_digi_dma_link_descriptors (noflash)`
esp_adc: new esp_adc component and adc drivers 2022-07-15 00:52:44 -04:00			`adc_hal: adc_hal_digi_stop (noflash)`
			`if IDF_TARGET_ESP32 = y \|\| IDF_TARGET_ESP32S2 = y:`
			`adc_hal: adc_hal_check_event (noflash)`
			`adc_hal: adc_hal_digi_clr_intr (noflash)`
			`adc_hal: adc_hal_get_desc_addr (noflash)`