esp-idf/components/freertos/FreeRTOS-Kernel-SMP/portable/xtensa/port.c

865 lines
34 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "sdkconfig.h"
#include <stdint.h>
#include <string.h>
#include "FreeRTOS.h"
#include "task.h" //For vApplicationStackOverflowHook
#include "portmacro.h"
#include "spinlock.h"
#include "xt_instr_macros.h"
#include "xtensa/xtensa_context.h"
#include "xtensa/corebits.h"
#include "xtensa/config/core.h"
#include "xtensa/config/core-isa.h"
#include "xtensa/xtruntime.h"
#include "esp_private/esp_int_wdt.h"
#include "esp_private/systimer.h"
#include "esp_private/periph_ctrl.h"
#include "esp_attr.h"
#include "esp_heap_caps.h"
#include "esp_system.h"
#include "esp_task.h"
#include "esp_log.h"
#include "esp_cpu.h"
#include "esp_rom_sys.h"
#include "esp_task_wdt.h"
#include "esp_heap_caps_init.h"
#include "esp_freertos_hooks.h"
#include "esp_intr_alloc.h"
#include "esp_memory_utils.h"
#ifdef CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER
#include "soc/periph_defs.h"
#include "soc/system_reg.h"
#include "hal/systimer_hal.h"
#include "hal/systimer_ll.h"
#endif // CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER
_Static_assert(portBYTE_ALIGNMENT == 16, "portBYTE_ALIGNMENT must be set to 16");
/*
OS state variables
*/
volatile unsigned port_xSchedulerRunning[portNUM_PROCESSORS] = {0}; // Indicates whether scheduler is running on a per-core basis
unsigned int port_interruptNesting[portNUM_PROCESSORS] = {0}; // Interrupt nesting level. Increased/decreased in portasm.c, _frxt_int_enter/_frxt_int_exit
//FreeRTOS SMP Locks
portMUX_TYPE port_xTaskLock = portMUX_INITIALIZER_UNLOCKED;
portMUX_TYPE port_xISRLock = portMUX_INITIALIZER_UNLOCKED;
/* ------------------------------------------------ IDF Compatibility --------------------------------------------------
* - These need to be defined for IDF to compile
* ------------------------------------------------------------------------------------------------------------------ */
// --------------------- Interrupts ------------------------
BaseType_t IRAM_ATTR xPortInterruptedFromISRContext(void)
{
return (port_interruptNesting[xPortGetCoreID()] != 0);
}
// ------------------ Critical Sections --------------------
/*
Variables used by IDF critical sections only (SMP tracks critical nesting inside TCB now)
[refactor-todo] Figure out how IDF critical sections will be merged with SMP FreeRTOS critical sections
*/
BaseType_t port_uxCriticalNestingIDF[portNUM_PROCESSORS] = {0};
BaseType_t port_uxCriticalOldInterruptStateIDF[portNUM_PROCESSORS] = {0};
/*
*******************************************************************************
* Interrupt stack. The size of the interrupt stack is determined by the config
* parameter "configISR_STACK_SIZE" in FreeRTOSConfig.h
*******************************************************************************
*/
volatile StackType_t DRAM_ATTR __attribute__((aligned(16))) port_IntStack[portNUM_PROCESSORS][configISR_STACK_SIZE];
/* One flag for each individual CPU. */
volatile uint32_t port_switch_flag[portNUM_PROCESSORS];
BaseType_t xPortEnterCriticalTimeout(portMUX_TYPE *lock, BaseType_t timeout)
{
/* Interrupts may already be disabled (if this function is called in nested
* manner). However, there's no atomic operation that will allow us to check,
* thus we have to disable interrupts again anyways.
*
* However, if this is call is NOT nested (i.e., the first call to enter a
* critical section), we will save the previous interrupt level so that the
* saved level can be restored on the last call to exit the critical.
*/
BaseType_t xOldInterruptLevel = XTOS_SET_INTLEVEL(XCHAL_EXCM_LEVEL);
if (!spinlock_acquire(lock, timeout)) {
//Timed out attempting to get spinlock. Restore previous interrupt level and return
XTOS_RESTORE_JUST_INTLEVEL((int) xOldInterruptLevel);
return pdFAIL;
}
//Spinlock acquired. Increment the IDF critical nesting count.
BaseType_t coreID = xPortGetCoreID();
BaseType_t newNesting = port_uxCriticalNestingIDF[coreID] + 1;
port_uxCriticalNestingIDF[coreID] = newNesting;
//If this is the first entry to a critical section. Save the old interrupt level.
if ( newNesting == 1 ) {
port_uxCriticalOldInterruptStateIDF[coreID] = xOldInterruptLevel;
}
return pdPASS;
}
void vPortExitCriticalIDF(portMUX_TYPE *lock)
{
/* This function may be called in a nested manner. Therefore, we only need
* to reenable interrupts if this is the last call to exit the critical. We
* can use the nesting count to determine whether this is the last exit call.
*/
spinlock_release(lock);
BaseType_t coreID = xPortGetCoreID();
BaseType_t nesting = port_uxCriticalNestingIDF[coreID];
if (nesting > 0) {
nesting--;
port_uxCriticalNestingIDF[coreID] = nesting;
//This is the last exit call, restore the saved interrupt level
if ( nesting == 0 ) {
XTOS_RESTORE_JUST_INTLEVEL((int) port_uxCriticalOldInterruptStateIDF[coreID]);
}
}
}
/*
In case any IDF libs called the port critical functions directly instead of through the macros.
Just inline call the IDF versions
*/
void vPortEnterCritical(portMUX_TYPE *lock)
{
vPortEnterCriticalIDF(lock);
}
void vPortExitCritical(portMUX_TYPE *lock)
{
vPortExitCriticalIDF(lock);
}
// ----------------------- System --------------------------
#define STACK_WATCH_POINT_NUMBER (SOC_CPU_WATCHPOINTS_NUM - 1)
void vPortSetStackWatchpoint( void *pxStackStart )
{
//Set watchpoint 1 to watch the last 32 bytes of the stack.
//Unfortunately, the Xtensa watchpoints can't set a watchpoint on a random [base - base+n] region because
//the size works by masking off the lowest address bits. For that reason, we futz a bit and watch the lowest 32
//bytes of the stack we can actually watch. In general, this can cause the watchpoint to be triggered at most
//28 bytes early. The value 32 is chosen because it's larger than the stack canary, which in FreeRTOS is 20 bytes.
//This way, we make sure we trigger before/when the stack canary is corrupted, not after.
int addr = (int)pxStackStart;
addr = (addr + 31) & (~31);
esp_cpu_set_watchpoint(STACK_WATCH_POINT_NUMBER, (char *)addr, 32, ESP_CPU_WATCHPOINT_STORE);
}
// ---------------------- Tick Timer -----------------------
BaseType_t xPortSysTickHandler(void);
#ifdef CONFIG_FREERTOS_SYSTICK_USES_CCOUNT
extern void _frxt_tick_timer_init(void);
extern void _xt_tick_divisor_init(void);
2022-06-22 16:00:16 -04:00
#ifdef CONFIG_FREERTOS_CORETIMER_0
#define SYSTICK_INTR_ID (ETS_INTERNAL_TIMER0_INTR_SOURCE+ETS_INTERNAL_INTR_SOURCE_OFF)
#endif
#ifdef CONFIG_FREERTOS_CORETIMER_1
#define SYSTICK_INTR_ID (ETS_INTERNAL_TIMER1_INTR_SOURCE+ETS_INTERNAL_INTR_SOURCE_OFF)
#endif
/**
* @brief Initialize CCONT timer to generate the tick interrupt
*
*/
void vPortSetupTimer(void)
{
/* Init the tick divisor value */
_xt_tick_divisor_init();
_frxt_tick_timer_init();
}
#elif CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER
_Static_assert(SOC_CPU_CORES_NUM <= SOC_SYSTIMER_ALARM_NUM - 1, "the number of cores must match the number of core alarms in SYSTIMER");
void SysTickIsrHandler(void *arg);
static uint32_t s_handled_systicks[portNUM_PROCESSORS] = { 0 };
#define SYSTICK_INTR_ID (ETS_SYSTIMER_TARGET0_EDGE_INTR_SOURCE)
/**
* @brief Set up the systimer peripheral to generate the tick interrupt
*
* Both timer alarms are configured in periodic mode.
* It is done at the same time so SysTicks for both CPUs occur at the same time or very close.
* Shifts a time of triggering interrupts for core 0 and core 1.
*/
void vPortSetupTimer(void)
{
unsigned cpuid = xPortGetCoreID();
#ifdef CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3
const unsigned level = ESP_INTR_FLAG_LEVEL3;
#else
const unsigned level = ESP_INTR_FLAG_LEVEL1;
#endif
/* Systimer HAL layer object */
static systimer_hal_context_t systimer_hal;
/* set system timer interrupt vector */
ESP_ERROR_CHECK(esp_intr_alloc(ETS_SYSTIMER_TARGET0_EDGE_INTR_SOURCE + cpuid, ESP_INTR_FLAG_IRAM | level, SysTickIsrHandler, &systimer_hal, NULL));
if (cpuid == 0) {
periph_module_enable(PERIPH_SYSTIMER_MODULE);
systimer_hal_init(&systimer_hal);
systimer_hal_tick_rate_ops_t ops = {
.ticks_to_us = systimer_ticks_to_us,
.us_to_ticks = systimer_us_to_ticks,
};
systimer_hal_set_tick_rate_ops(&systimer_hal, &ops);
systimer_ll_set_counter_value(systimer_hal.dev, SYSTIMER_LL_COUNTER_OS_TICK, 0);
systimer_ll_apply_counter_value(systimer_hal.dev, SYSTIMER_LL_COUNTER_OS_TICK);
for (cpuid = 0; cpuid < SOC_CPU_CORES_NUM; cpuid++) {
systimer_hal_counter_can_stall_by_cpu(&systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK, cpuid, false);
}
for (cpuid = 0; cpuid < portNUM_PROCESSORS; ++cpuid) {
uint32_t alarm_id = SYSTIMER_LL_ALARM_OS_TICK_CORE0 + cpuid;
/* configure the timer */
systimer_hal_connect_alarm_counter(&systimer_hal, alarm_id, SYSTIMER_LL_COUNTER_OS_TICK);
systimer_hal_set_alarm_period(&systimer_hal, alarm_id, 1000000UL / CONFIG_FREERTOS_HZ);
systimer_hal_select_alarm_mode(&systimer_hal, alarm_id, SYSTIMER_ALARM_MODE_PERIOD);
systimer_hal_counter_can_stall_by_cpu(&systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK, cpuid, true);
if (cpuid == 0) {
systimer_hal_enable_alarm_int(&systimer_hal, alarm_id);
systimer_hal_enable_counter(&systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK);
#ifndef CONFIG_FREERTOS_UNICORE
// SysTick of core 0 and core 1 are shifted by half of period
systimer_hal_counter_value_advance(&systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK, 1000000UL / CONFIG_FREERTOS_HZ / 2);
#endif
}
}
} else {
uint32_t alarm_id = SYSTIMER_LL_ALARM_OS_TICK_CORE0 + cpuid;
systimer_hal_enable_alarm_int(&systimer_hal, alarm_id);
}
}
/**
* @brief Systimer interrupt handler.
*
* The Systimer interrupt for SysTick works in periodic mode no need to calc the next alarm.
* If a timer interrupt is ever serviced more than one tick late, it is necessary to process multiple ticks.
*/
IRAM_ATTR void SysTickIsrHandler(void *arg)
{
uint32_t cpuid = xPortGetCoreID();
systimer_hal_context_t *systimer_hal = (systimer_hal_context_t *)arg;
#ifdef CONFIG_PM_TRACE
ESP_PM_TRACE_ENTER(TICK, cpuid);
#endif
uint32_t alarm_id = SYSTIMER_LL_ALARM_OS_TICK_CORE0 + cpuid;
do {
systimer_ll_clear_alarm_int(systimer_hal->dev, alarm_id);
uint32_t diff = systimer_hal_get_counter_value(systimer_hal, SYSTIMER_LL_COUNTER_OS_TICK) / systimer_ll_get_alarm_period(systimer_hal->dev, alarm_id) - s_handled_systicks[cpuid];
if (diff > 0) {
if (s_handled_systicks[cpuid] == 0) {
s_handled_systicks[cpuid] = diff;
diff = 1;
} else {
s_handled_systicks[cpuid] += diff;
}
do {
xPortSysTickHandler();
} while (--diff);
}
} while (systimer_ll_is_alarm_int_fired(systimer_hal->dev, alarm_id));
#ifdef CONFIG_PM_TRACE
ESP_PM_TRACE_EXIT(TICK, cpuid);
#endif
}
#endif // CONFIG_FREERTOS_SYSTICK_USES_CCOUNT
/* ---------------------------------------------- Port Implementations -------------------------------------------------
* Implementations of Porting Interface functions
* ------------------------------------------------------------------------------------------------------------------ */
// --------------------- Interrupts ------------------------
BaseType_t xPortCheckIfInISR(void)
{
//Disable interrupts so that reading port_interruptNesting is atomic
BaseType_t ret;
unsigned int prev_int_level = portDISABLE_INTERRUPTS();
ret = (port_interruptNesting[xPortGetCoreID()] != 0) ? pdTRUE : pdFALSE;
portRESTORE_INTERRUPTS(prev_int_level);
return ret;
}
// ------------------ Critical Sections --------------------
void vPortTakeLock( portMUX_TYPE *lock )
{
spinlock_acquire( lock, portMUX_NO_TIMEOUT);
}
void vPortReleaseLock( portMUX_TYPE *lock )
{
spinlock_release( lock );
}
// ---------------------- Yielding -------------------------
// ----------------------- System --------------------------
/* ------------------------------------------------ FreeRTOS Portable --------------------------------------------------
* - Provides implementation for functions required by FreeRTOS
* - Declared in portable.h
* ------------------------------------------------------------------------------------------------------------------ */
// ----------------- Scheduler Start/End -------------------
extern void _xt_coproc_init(void);
BaseType_t xPortStartScheduler( void )
{
portDISABLE_INTERRUPTS();
// Interrupts are disabled at this point and stack contains PS with enabled interrupts when task context is restored
#if XCHAL_CP_NUM > 0
/* Initialize co-processor management for tasks. Leave CPENABLE alone. */
_xt_coproc_init();
#endif
/* Setup the hardware to generate the tick. */
vPortSetupTimer();
port_xSchedulerRunning[xPortGetCoreID()] = 1;
#if configNUM_CORES > 1
// Workaround for non-thread safe multi-core OS startup (see IDF-4524)
if (xPortGetCoreID() != 0) {
vTaskStartSchedulerOtherCores();
}
#endif // configNUM_CORES > 1
// Cannot be directly called from C; never returns
__asm__ volatile ("call0 _frxt_dispatch\n");
/* Should not get here. */
return pdTRUE;
}
void vPortEndScheduler( void )
{
;
}
// ----------------------- Memory --------------------------
#define FREERTOS_SMP_MALLOC_CAPS (MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)
void *pvPortMalloc( size_t xSize )
{
return heap_caps_malloc(xSize, FREERTOS_SMP_MALLOC_CAPS);
}
void vPortFree( void *pv )
{
heap_caps_free(pv);
}
void vPortInitialiseBlocks( void )
{
; //Does nothing, heap is initialized separately in ESP-IDF
}
size_t xPortGetFreeHeapSize( void )
{
return esp_get_free_heap_size();
}
#if( configSTACK_ALLOCATION_FROM_SEPARATE_HEAP == 1 )
void *pvPortMallocStack( size_t xSize )
{
return NULL;
}
void vPortFreeStack( void *pv )
{
}
#endif
// ------------------------ Stack --------------------------
// User exception dispatcher when exiting
void _xt_user_exit(void);
#if CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER
// Wrapper to allow task functions to return (increases stack overhead by 16 bytes)
static void vPortTaskWrapper(TaskFunction_t pxCode, void *pvParameters)
{
pxCode(pvParameters);
//FreeRTOS tasks should not return. Log the task name and abort.
char *pcTaskName = pcTaskGetName(NULL);
ESP_LOGE("FreeRTOS", "FreeRTOS Task \"%s\" should not return, Aborting now!", pcTaskName);
abort();
}
#endif
const DRAM_ATTR uint32_t offset_pxEndOfStack = offsetof(StaticTask_t, pxDummy8);
#if ( configUSE_CORE_AFFINITY == 1 && configNUM_CORES > 1 )
const DRAM_ATTR uint32_t offset_uxCoreAffinityMask = offsetof(StaticTask_t, uxDummy25);
#endif // ( configUSE_CORE_AFFINITY == 1 && configNUM_CORES > 1 )
const DRAM_ATTR uint32_t offset_cpsa = XT_CP_SIZE;
/**
* @brief Align stack pointer in a downward growing stack
*
* This macro is used to round a stack pointer downwards to the nearest n-byte boundary, where n is a power of 2.
* This macro is generally used when allocating aligned areas on a downward growing stack.
*/
#define STACKPTR_ALIGN_DOWN(n, ptr) ((ptr) & (~((n)-1)))
#if XCHAL_CP_NUM > 0
/**
* @brief Allocate and initialize coprocessor save area on the stack
*
* This function allocates the coprocessor save area on the stack (sized XT_CP_SIZE) which includes...
* - Individual save areas for each coprocessor (size XT_CPx_SA, inclusive of each area's alignment)
* - Coprocessor context switching flags (e.g., XT_CPENABLE, XT_CPSTORED, XT_CP_CS_ST, XT_CP_ASA).
*
* The coprocessor save area is aligned to a 16-byte boundary.
* The coprocessor context switching flags are then initialized
*
* @param[in] uxStackPointer Current stack pointer address
* @return Stack pointer that points to allocated and initialized the coprocessor save area
*/
FORCE_INLINE_ATTR UBaseType_t uxInitialiseStackCPSA(UBaseType_t uxStackPointer)
{
/*
HIGH ADDRESS
|-------------------| XT_CP_SIZE
| CPn SA | ^
| ... | |
| CP0 SA | |
| ----------------- | | ---- XCHAL_TOTAL_SA_ALIGN aligned
|-------------------| | 12 bytes
| XT_CP_ASA | | ^
| XT_CP_CS_ST | | |
| XT_CPSTORED | | |
| XT_CPENABLE | | |
|-------------------| ---------------------- 16 byte aligned
LOW ADDRESS
*/
// Allocate overall coprocessor save area, aligned down to 16 byte boundary
uxStackPointer = STACKPTR_ALIGN_DOWN(16, uxStackPointer - XT_CP_SIZE);
// Initialize the coprocessor context switching flags.
uint32_t *p = (uint32_t *)uxStackPointer;
p[0] = 0; // Clear XT_CPENABLE and XT_CPSTORED
p[1] = 0; // Clear XT_CP_CS_ST
// XT_CP_ASA points to the aligned start of the individual CP save areas (i.e., start of CP0 SA)
p[2] = (uint32_t)ALIGNUP(XCHAL_TOTAL_SA_ALIGN, (uint32_t)uxStackPointer + 12);
return uxStackPointer;
}
#endif /* XCHAL_CP_NUM > 0 */
/**
* @brief Allocate and initialize GCC TLS area
*
* This function allocates and initializes the area on the stack used to store GCC TLS (Thread Local Storage) variables.
* - The area's size is derived from the TLS section's linker variables, and rounded up to a multiple of 16 bytes
* - The allocated area is aligned to a 16-byte aligned address
* - The TLS variables in the area are then initialized
*
* Each task access the TLS variables using the THREADPTR register plus an offset to obtain the address of the variable.
* The value for the THREADPTR register is also calculated by this function, and that value should be use to initialize
* the THREADPTR register.
*
* @param[in] uxStackPointer Current stack pointer address
* @param[out] ret_threadptr_reg_init Calculated THREADPTR register initialization value
* @return Stack pointer that points to the TLS area
*/
FORCE_INLINE_ATTR UBaseType_t uxInitialiseStackTLS(UBaseType_t uxStackPointer, uint32_t *ret_threadptr_reg_init)
{
/*
TLS layout at link-time, where 0xNNN is the offset that the linker calculates to a particular TLS variable.
LOW ADDRESS
|---------------------------| Linker Symbols
| Section | --------------
| .flash.rodata |
0x0|---------------------------| <- _flash_rodata_start
^ | Other Data |
| |---------------------------| <- _thread_local_start
| | .tbss | ^
V | | |
0xNNN | int example; | | tls_area_size
| | |
| .tdata | V
|---------------------------| <- _thread_local_end
| Other data |
| ... |
|---------------------------|
HIGH ADDRESS
*/
// Calculate the TLS area's size (rounded up to multiple of 16 bytes).
extern int _thread_local_start, _thread_local_end, _flash_rodata_start, _flash_rodata_align;
const uint32_t tls_area_size = ALIGNUP(16, (uint32_t)&_thread_local_end - (uint32_t)&_thread_local_start);
// TODO: check that TLS area fits the stack
// Allocate space for the TLS area on the stack. The area must be allocated at a 16-byte aligned address
uxStackPointer = STACKPTR_ALIGN_DOWN(16, uxStackPointer - (UBaseType_t)tls_area_size);
// Initialize the TLS area with the initialization values of each TLS variable
memcpy((void *)uxStackPointer, &_thread_local_start, tls_area_size);
/*
Calculate the THREADPTR register's initialization value based on the link-time offset and the TLS area allocated on
the stack.
HIGH ADDRESS
|---------------------------|
| .tdata (*) |
^ | int example; |
| | |
| | .tbss (*) |
| |---------------------------| <- uxStackPointer (start of TLS area)
0xNNN | | | ^
| | | |
| ... | (_thread_local_start - _flash_rodata_start) + align_up(TCB_SIZE, tls_section_alignment)
| | | |
| | | V
V | | <- threadptr register's value
LOW ADDRESS
Note: Xtensa is slightly different compared to the RISC-V port as there is an implicit aligned TCB_SIZE added to
the offset. (search for 'tpoff' in elf32-xtensa.c in BFD):
- "offset = address - tls_section_vma + align_up(TCB_SIZE, tls_section_alignment)"
- TCB_SIZE is hardcoded to 8
*/
const uint32_t tls_section_align = (uint32_t)&_flash_rodata_align; // ALIGN value of .flash.rodata section
#define TCB_SIZE 8
const uint32_t base = ALIGNUP(tls_section_align, TCB_SIZE);
*ret_threadptr_reg_init = (uint32_t)uxStackPointer - ((uint32_t)&_thread_local_start - (uint32_t)&_flash_rodata_start) - base;
return uxStackPointer;
}
/**
* @brief Initialize the task's starting interrupt stack frame
*
* This function initializes the task's starting interrupt stack frame. The dispatcher will use this stack frame in a
* context restore routine. Therefore, the starting stack frame must be initialized as if the task was interrupted right
* before its first instruction is called.
*
* - The stack frame is allocated to a 16-byte aligned address
* - The THREADPTR register is saved in the extra storage area of the stack frame. This is also initialized
*
* @param[in] uxStackPointer Current stack pointer address
* @param[in] pxCode Task function
* @param[in] pvParameters Task function's parameter
* @param[in] threadptr_reg_init THREADPTR register initialization value
* @return Stack pointer that points to the stack frame
*/
FORCE_INLINE_ATTR UBaseType_t uxInitialiseStackFrame(UBaseType_t uxStackPointer, TaskFunction_t pxCode, void *pvParameters, uint32_t threadptr_reg_init)
{
/*
HIGH ADDRESS
|---------------------------| ^ XT_STK_FRMSZ
| | |
| Stack Frame Extra Storage | |
| | |
| ------------------------- | | ^ XT_STK_EXTRA
| | | |
| Intr/Exc Stack Frame | | |
| | V V
| ------------------------- | ---------------------- 16 byte aligned
LOW ADDRESS
*/
/*
Allocate space for the task's starting interrupt stack frame.
- The stack frame must be allocated to a 16-byte aligned address.
- We use XT_STK_FRMSZ (instead of sizeof(XtExcFrame)) as it...
- includes the size of the extra storage area
- includes the size for a base save area before the stack frame
- rounds up the total size to a multiple of 16
*/
UBaseType_t uxStackPointerPrevious = uxStackPointer;
uxStackPointer = STACKPTR_ALIGN_DOWN(16, uxStackPointer - XT_STK_FRMSZ);
// Clear the entire interrupt stack frame
memset((void *)uxStackPointer, 0, (size_t)(uxStackPointerPrevious - uxStackPointer));
XtExcFrame *frame = (XtExcFrame *)uxStackPointer;
/*
Initialize common registers
*/
frame->a0 = 0; // Set the return address to 0 terminate GDB backtrace
frame->a1 = uxStackPointer + XT_STK_FRMSZ; // Saved stack pointer should point to physical top of stack frame
frame->exit = (UBaseType_t) _xt_user_exit; // User exception exit dispatcher
/*
Initialize the task's entry point. This will differ depending on
- Whether the task's entry point is the wrapper function or pxCode
- Whether Windowed ABI is used (for windowed, we mimic the task entry point being call4'd )
*/
#if CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER
frame->pc = (UBaseType_t) vPortTaskWrapper; // Task entry point is the wrapper function
#ifdef __XTENSA_CALL0_ABI__
frame->a2 = (UBaseType_t) pxCode; // Wrapper function's argument 0 (which is the task function)
frame->a3 = (UBaseType_t) pvParameters; // Wrapper function's argument 1 (which is the task function's argument)
#else // __XTENSA_CALL0_ABI__
frame->a6 = (UBaseType_t) pxCode; // Wrapper function's argument 0 (which is the task function), passed as if we call4'd
frame->a7 = (UBaseType_t) pvParameters; // Wrapper function's argument 1 (which is the task function's argument), passed as if we call4'd
#endif // __XTENSA_CALL0_ABI__
#else
frame->pc = (UBaseType_t) pxCode; // Task entry point is the provided task function
#ifdef __XTENSA_CALL0_ABI__
frame->a2 = (UBaseType_t) pvParameters; // Task function's argument
#else // __XTENSA_CALL0_ABI__
frame->a6 = (UBaseType_t) pvParameters; // Task function's argument, passed as if we call4'd
#endif // __XTENSA_CALL0_ABI__
#endif
/*
Set initial PS to int level 0, EXCM disabled ('rfe' will enable), user mode.
For windowed ABI also set WOE and CALLINC (pretend task was 'call4'd)
*/
#ifdef __XTENSA_CALL0_ABI__
frame->ps = PS_UM | PS_EXCM;
#else // __XTENSA_CALL0_ABI__
frame->ps = PS_UM | PS_EXCM | PS_WOE | PS_CALLINC(1);
#endif // __XTENSA_CALL0_ABI__
#ifdef XT_USE_SWPRI
// Set the initial virtual priority mask value to all 1's.
frame->vpri = 0xFFFFFFFF;
#endif
// Initialize the threadptr register in the extra save area of the stack frame
uint32_t *threadptr_reg = (uint32_t *)(uxStackPointer + XT_STK_EXTRA);
*threadptr_reg = threadptr_reg_init;
return uxStackPointer;
}
#if ( portHAS_STACK_OVERFLOW_CHECKING == 1 )
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
StackType_t * pxEndOfStack,
TaskFunction_t pxCode,
void * pvParameters )
#else
StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack,
TaskFunction_t pxCode,
void * pvParameters )
#endif
{
/*
HIGH ADDRESS
|---------------------------| <- pxTopOfStack on entry
| Coproc Save Area |
| ------------------------- |
| TLS Variables |
| ------------------------- | <- Start of useable stack
| Starting stack frame |
| ------------------------- | <- pxTopOfStack on return (which is the tasks current SP)
| | |
| | |
| V |
----------------------------- <- Bottom of stack
LOW ADDRESS
- All stack areas are aligned to 16 byte boundary
- We use UBaseType_t for all of stack area initialization functions for more convenient pointer arithmetic
*/
UBaseType_t uxStackPointer = (UBaseType_t)pxTopOfStack;
configASSERT((uxStackPointer & portBYTE_ALIGNMENT_MASK) == 0);
#if XCHAL_CP_NUM > 0
// Initialize the coprocessor save area
uxStackPointer = uxInitialiseStackCPSA(uxStackPointer);
configASSERT((uxStackPointer & portBYTE_ALIGNMENT_MASK) == 0);
#endif /* XCHAL_CP_NUM > 0 */
// Initialize the GCC TLS area
uint32_t threadptr_reg_init;
uxStackPointer = uxInitialiseStackTLS(uxStackPointer, &threadptr_reg_init);
configASSERT((uxStackPointer & portBYTE_ALIGNMENT_MASK) == 0);
// Initialize the starting interrupt stack frame
uxStackPointer = uxInitialiseStackFrame(uxStackPointer, pxCode, pvParameters, threadptr_reg_init);
configASSERT((uxStackPointer & portBYTE_ALIGNMENT_MASK) == 0);
// Return the task's current stack pointer address which should point to the starting interrupt stack frame
return (StackType_t *)uxStackPointer;
}
// -------------------- Co-Processor -----------------------
#if ( XCHAL_CP_NUM > 0 && configUSE_CORE_AFFINITY == 1 && configNUM_CORES > 1 )
void _xt_coproc_release(volatile void *coproc_sa_base, BaseType_t xCoreID);
void vPortCleanUpCoprocArea( void *pxTCB )
{
StackType_t *coproc_area;
BaseType_t xCoreID;
/* Calculate the coproc save area in the stack from the TCB base */
coproc_area = ( StackType_t * ) ( ( uint32_t ) ( pxTCB + offset_pxEndOfStack ));
coproc_area = ( StackType_t * ) ( ( ( portPOINTER_SIZE_TYPE ) coproc_area ) & ( ~( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) ) );
coproc_area = ( StackType_t * ) ( ( ( uint32_t ) coproc_area - XT_CP_SIZE ) & ~0xf );
/* Extract core ID from the affinity mask */
xCoreID = __builtin_ffs( * ( UBaseType_t * ) ( pxTCB + offset_uxCoreAffinityMask ) );
assert( xCoreID >= 1 );
xCoreID -= 1;
/* If task has live floating point registers somewhere, release them */
_xt_coproc_release( coproc_area, xCoreID );
}
#endif // ( XCHAL_CP_NUM > 0 && configUSE_CORE_AFFINITY == 1 && configNUM_CORES > 1 )
// ------- Thread Local Storage Pointers Deletion Callbacks -------
#if ( CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS )
void vPortTLSPointersDelCb( void *pxTCB )
{
/* Typecast pxTCB to StaticTask_t type to access TCB struct members.
* pvDummy15 corresponds to pvThreadLocalStoragePointers member of the TCB.
*/
StaticTask_t *tcb = ( StaticTask_t * )pxTCB;
/* The TLSP deletion callbacks are stored at an offset of (configNUM_THREAD_LOCAL_STORAGE_POINTERS/2) */
TlsDeleteCallbackFunction_t *pvThreadLocalStoragePointersDelCallback = ( TlsDeleteCallbackFunction_t * )( &( tcb->pvDummy15[ ( configNUM_THREAD_LOCAL_STORAGE_POINTERS / 2 ) ] ) );
/* We need to iterate over half the depth of the pvThreadLocalStoragePointers area
* to access all TLS pointers and their respective TLS deletion callbacks.
*/
for ( int x = 0; x < ( configNUM_THREAD_LOCAL_STORAGE_POINTERS / 2 ); x++ ) {
if ( pvThreadLocalStoragePointersDelCallback[ x ] != NULL ) { //If del cb is set
/* In case the TLSP deletion callback has been overwritten by a TLS pointer, gracefully abort. */
if ( !esp_ptr_executable( pvThreadLocalStoragePointersDelCallback[ x ] ) ) {
// We call EARLY log here as currently portCLEAN_UP_TCB() is called in a critical section
ESP_EARLY_LOGE("FreeRTOS", "Fatal error: TLSP deletion callback at index %d overwritten with non-excutable pointer %p", x, pvThreadLocalStoragePointersDelCallback[ x ]);
abort();
}
pvThreadLocalStoragePointersDelCallback[ x ]( x, tcb->pvDummy15[ x ] ); //Call del cb
}
}
}
#endif // CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS
// -------------------- Tick Handler -----------------------
extern void esp_vApplicationIdleHook(void);
extern void esp_vApplicationTickHook(void);
BaseType_t xPortSysTickHandler(void)
{
portbenchmarkIntLatency();
traceISR_ENTER(SYSTICK_INTR_ID);
BaseType_t ret;
esp_vApplicationTickHook();
if (portGET_CORE_ID() == 0) {
// FreeRTOS SMP requires that only core 0 calls xTaskIncrementTick()
ret = xTaskIncrementTick();
} else {
ret = pdFALSE;
}
if (ret != pdFALSE) {
portYIELD_FROM_ISR();
} else {
traceISR_EXIT();
}
return ret;
}
// ------------------- Hook Functions ----------------------
#include <stdlib.h>
#if ( configCHECK_FOR_STACK_OVERFLOW > 0 )
void __attribute__((weak)) vApplicationStackOverflowHook( TaskHandle_t xTask, char *pcTaskName )
{
#define ERR_STR1 "***ERROR*** A stack overflow in task "
#define ERR_STR2 " has been detected."
const char *str[] = {ERR_STR1, pcTaskName, ERR_STR2};
char buf[sizeof(ERR_STR1) + CONFIG_FREERTOS_MAX_TASK_NAME_LEN + sizeof(ERR_STR2) + 1 /* null char */] = { 0 };
char *dest = buf;
for (size_t i = 0 ; i < sizeof(str) / sizeof(str[0]); i++) {
dest = strcat(dest, str[i]);
}
esp_system_abort(buf);
}
#endif
#if CONFIG_FREERTOS_USE_MINIMAL_IDLE_HOOK
/*
By default, the port uses vApplicationMinimalIdleHook() to run IDF style idle
hooks. However, users may also want to provide their own vApplicationMinimalIdleHook().
In this case, we use to -Wl,--wrap option to wrap the user provided vApplicationMinimalIdleHook()
*/
extern void __real_vApplicationMinimalIdleHook( void );
void __wrap_vApplicationMinimalIdleHook( void )
{
esp_vApplicationIdleHook(); //Run IDF style hooks
__real_vApplicationMinimalIdleHook(); //Call the user provided vApplicationMinimalIdleHook()
}
#else // CONFIG_FREERTOS_USE_MINIMAL_IDLE_HOOK
void vApplicationMinimalIdleHook( void )
{
esp_vApplicationIdleHook(); //Run IDF style hooks
}
#endif // CONFIG_FREERTOS_USE_MINIMAL_IDLE_HOOK
/*
* Hook function called during prvDeleteTCB() to cleanup any
* user defined static memory areas in the TCB.
*/
#if CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP
void __real_vPortCleanUpTCB( void *pxTCB );
void __wrap_vPortCleanUpTCB( void *pxTCB )
#else
void vPortCleanUpTCB ( void *pxTCB )
#endif /* CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP */
{
#if ( CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP )
/* Call user defined vPortCleanUpTCB */
__real_vPortCleanUpTCB( pxTCB );
#endif /* CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP */
#if ( CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS )
/* Call TLS pointers deletion callbacks */
vPortTLSPointersDelCb( pxTCB );
#endif /* CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS */
#if ( XCHAL_CP_NUM > 0 && configUSE_CORE_AFFINITY == 1 && configNUM_CORES > 1 )
/* Cleanup coproc save area */
vPortCleanUpCoprocArea( pxTCB );
#endif // ( XCHAL_CP_NUM > 0 && configUSE_CORE_AFFINITY == 1 && configNUM_CORES > 1 )
}