esp-idf/examples/peripherals/lcd/tjpgd/main/lcd_tjpgd_example_main.c

/*
 * SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: CC0-1.0
 */

#include <stdio.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_lcd_panel_io.h"
#include "esp_lcd_panel_vendor.h"
#include "esp_lcd_panel_ops.h"
#include "esp_heap_caps.h"
#include "driver/spi_master.h"
#include "driver/gpio.h"
#include "pretty_effect.h"

// Using SPI2 in the example, as it aslo supports octal modes on some targets
#define LCD_HOST       SPI2_HOST
// To speed up transfers, every SPI transfer sends a bunch of lines. This define specifies how many.
// More means more memory use, but less overhead for setting up / finishing transfers. Make sure 240
// is dividable by this.
#define PARALLEL_LINES 12
// The number of frames to show before rotate the graph
#define ROTATE_FRAME   30

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//////////////////// Please update the following configuration according to your LCD spec //////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
#define EXAMPLE_LCD_PIXEL_CLOCK_HZ (10 * 1000 * 1000)
#define EXAMPLE_LCD_BK_LIGHT_ON_LEVEL  0
#define EXAMPLE_LCD_BK_LIGHT_OFF_LEVEL !EXAMPLE_LCD_BK_LIGHT_ON_LEVEL
#define EXAMPLE_PIN_NUM_DATA0          23  /*!< for 1-line SPI, this also refered as MOSI */
#define EXAMPLE_PIN_NUM_PCLK           19
#define EXAMPLE_PIN_NUM_CS             22
#define EXAMPLE_PIN_NUM_DC             21
#define EXAMPLE_PIN_NUM_RST            18
#define EXAMPLE_PIN_NUM_BK_LIGHT       5

// The pixel number in horizontal and vertical
#define EXAMPLE_LCD_H_RES              320
#define EXAMPLE_LCD_V_RES              240
// Bit number used to represent command and parameter
#define EXAMPLE_LCD_CMD_BITS           8
#define EXAMPLE_LCD_PARAM_BITS         8

#if CONFIG_EXAMPLE_LCD_SPI_8_LINE_MODE
#define EXAMPLE_PIN_NUM_DATA1    7
#define EXAMPLE_PIN_NUM_DATA2    8
#define EXAMPLE_PIN_NUM_DATA3    9
#define EXAMPLE_PIN_NUM_DATA4    10
#define EXAMPLE_PIN_NUM_DATA5    11
#define EXAMPLE_PIN_NUM_DATA6    12
#define EXAMPLE_PIN_NUM_DATA7    13
#endif // CONFIG_EXAMPLE_LCD_SPI_8_LINE_MODE

// Simple routine to generate some patterns and send them to the LCD. Because the
// SPI driver handles transactions in the background, we can calculate the next line
// while the previous one is being sent.
static uint16_t *s_lines[2];
static void display_pretty_colors(esp_lcd_panel_handle_t panel_handle)
{
    int frame = 0;
    // Indexes of the line currently being sent to the LCD and the line we're calculating
    int sending_line = 0;
    int calc_line = 0;

    // After ROTATE_FRAME frames, the image will be rotated
    while (frame <= ROTATE_FRAME) {
        frame++;
        for (int y = 0; y < EXAMPLE_LCD_V_RES; y += PARALLEL_LINES) {
            // Calculate a line
            pretty_effect_calc_lines(s_lines[calc_line], y, frame, PARALLEL_LINES);
            sending_line = calc_line;
            calc_line = !calc_line;
            // Send the calculated data
            esp_lcd_panel_draw_bitmap(panel_handle, 0, y, 0 + EXAMPLE_LCD_H_RES, y + PARALLEL_LINES, s_lines[sending_line]);
        }
    }
}

void app_main(void)
{
    gpio_config_t bk_gpio_config = {
        .mode = GPIO_MODE_OUTPUT,
        .pin_bit_mask = 1ULL << EXAMPLE_PIN_NUM_BK_LIGHT
    };
    // Initialize the GPIO of backlight
    ESP_ERROR_CHECK(gpio_config(&bk_gpio_config));

    spi_bus_config_t buscfg = {
        .sclk_io_num = EXAMPLE_PIN_NUM_PCLK,
        .mosi_io_num = EXAMPLE_PIN_NUM_DATA0,
        .miso_io_num = -1,
        .quadwp_io_num = -1,
        .quadhd_io_num = -1,
        .max_transfer_sz = PARALLEL_LINES * EXAMPLE_LCD_H_RES * 2 + 8
    };
#if CONFIG_EXAMPLE_LCD_SPI_8_LINE_MODE
    buscfg.data1_io_num = EXAMPLE_PIN_NUM_DATA1;
    buscfg.data2_io_num = EXAMPLE_PIN_NUM_DATA2;
    buscfg.data3_io_num = EXAMPLE_PIN_NUM_DATA3;
    buscfg.data4_io_num = EXAMPLE_PIN_NUM_DATA4;
    buscfg.data5_io_num = EXAMPLE_PIN_NUM_DATA5;
    buscfg.data6_io_num = EXAMPLE_PIN_NUM_DATA6;
    buscfg.data7_io_num = EXAMPLE_PIN_NUM_DATA7;
    buscfg.flags = SPICOMMON_BUSFLAG_OCTAL;
#endif
    // Initialize the SPI bus
    ESP_ERROR_CHECK(spi_bus_initialize(LCD_HOST, &buscfg, SPI_DMA_CH_AUTO));

    esp_lcd_panel_io_handle_t io_handle = NULL;
    esp_lcd_panel_io_spi_config_t io_config = {
        .dc_gpio_num = EXAMPLE_PIN_NUM_DC,
        .cs_gpio_num = EXAMPLE_PIN_NUM_CS,
        .pclk_hz = EXAMPLE_LCD_PIXEL_CLOCK_HZ,
        .lcd_cmd_bits = EXAMPLE_LCD_CMD_BITS,
        .lcd_param_bits = EXAMPLE_LCD_PARAM_BITS,
        .spi_mode = 0,
        .trans_queue_depth = 10,
    };
#if CONFIG_EXAMPLE_LCD_SPI_8_LINE_MODE
    io_config.spi_mode = 3;  // using mode 3 to simulate Intel 8080 timing
    io_config.flags.octal_mode = 1;
#endif
    // Attach the LCD to the SPI bus
    ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi((esp_lcd_spi_bus_handle_t)LCD_HOST, &io_config, &io_handle));

    esp_lcd_panel_handle_t panel_handle = NULL;
    esp_lcd_panel_dev_config_t panel_config = {
        .reset_gpio_num = EXAMPLE_PIN_NUM_RST,
        .color_space = ESP_LCD_COLOR_SPACE_BGR,
        .bits_per_pixel = 16,
    };
    // Initialize the LCD configuration
    ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(io_handle, &panel_config, &panel_handle));

    // Turn off backlight to avoid unpredictable display on the LCD screen while initializing
    // the LCD panel driver. (Different LCD screens may need different levels)
    ESP_ERROR_CHECK(gpio_set_level(EXAMPLE_PIN_NUM_BK_LIGHT, EXAMPLE_LCD_BK_LIGHT_OFF_LEVEL));

    // Reset the display
    ESP_ERROR_CHECK(esp_lcd_panel_reset(panel_handle));

    // Initialize LCD panel
    ESP_ERROR_CHECK(esp_lcd_panel_init(panel_handle));

    // Turn on the screen
    ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(panel_handle, true));

    // Swap x and y axis (Different LCD screens may need different options)
    ESP_ERROR_CHECK(esp_lcd_panel_swap_xy(panel_handle, true));

    // Turn on backlight (Different LCD screens may need different levels)
    ESP_ERROR_CHECK(gpio_set_level(EXAMPLE_PIN_NUM_BK_LIGHT, EXAMPLE_LCD_BK_LIGHT_ON_LEVEL));

    // Initialize the effect displayed
    ESP_ERROR_CHECK(pretty_effect_init());

    // "Rotate or not" flag
    bool is_rotated = false;

    // Allocate memory for the pixel buffers
    for (int i = 0; i < 2; i++) {
        s_lines[i] = heap_caps_malloc(EXAMPLE_LCD_H_RES * PARALLEL_LINES * sizeof(uint16_t), MALLOC_CAP_DMA);
        assert(s_lines[i] != NULL);
    }

    // Start and rotate
    while (1) {
        // Set driver configuration to rotate 180 degrees each time
        ESP_ERROR_CHECK(esp_lcd_panel_mirror(panel_handle, is_rotated, is_rotated));
        // Display
        display_pretty_colors(panel_handle);
        is_rotated = !is_rotated;
    }
}