esp-idf/examples/ethernet/basic/main/Kconfig.projbuild

141 lines
4.7 KiB
Plaintext
Raw Normal View History

2019-04-10 04:24:50 -04:00
menu "Example Configuration"
choice EXAMPLE_USE_ETHERNET
prompt "Ethernet Type"
default EXAMPLE_USE_INTERNAL_ETHERNET if IDF_TARGET_ESP32
default EXAMPLE_USE_DM9051 if !IDF_TARGET_ESP32
2019-04-10 04:24:50 -04:00
help
Select which kind of Ethernet will be used in the example.
2019-04-10 04:24:50 -04:00
config EXAMPLE_USE_INTERNAL_ETHERNET
depends on IDF_TARGET_ESP32
select ETH_USE_ESP32_EMAC
bool "Internal EMAC"
2019-04-10 04:24:50 -04:00
help
Select internal Ethernet MAC controller.
2019-04-10 04:24:50 -04:00
config EXAMPLE_USE_DM9051
bool "DM9051 Module"
select ETH_USE_SPI_ETHERNET
select ETH_SPI_ETHERNET_DM9051
2019-04-10 04:24:50 -04:00
help
Select external SPI-Ethernet module (DM9051).
endchoice
2019-04-10 04:24:50 -04:00
if EXAMPLE_USE_INTERNAL_ETHERNET
choice EXAMPLE_ETH_PHY_MODEL
prompt "Ethernet PHY Device"
default EXAMPLE_ETH_PHY_IP101
2019-04-10 04:24:50 -04:00
help
Select the Ethernet PHY device to use in the example.
config EXAMPLE_ETH_PHY_IP101
bool "IP101"
help
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
config EXAMPLE_ETH_PHY_RTL8201
bool "RTL8201/SR8201"
help
RTL8201F/SR8201F is a single port 10/100Mb Ethernet Transceiver with auto MDIX.
Goto http://www.corechip-sz.com/productsview.asp?id=22 for more information about it.
2019-04-10 04:24:50 -04:00
config EXAMPLE_ETH_PHY_LAN8720
bool "LAN8720"
help
LAN8720A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
Goto https://www.microchip.com/LAN8720A for more information about it.
config EXAMPLE_ETH_PHY_DP83848
bool "DP83848"
help
DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
Goto http://www.ti.com/product/DP83848J for more information about it.
config EXAMPLE_ETH_PHY_KSZ8041
bool "KSZ8041"
help
The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
Goto https://www.microchip.com/wwwproducts/en/KSZ8041 for more information about it.
endchoice
config EXAMPLE_ETH_MDC_GPIO
int "SMI MDC GPIO number"
default 23
help
Set the GPIO number used by SMI MDC.
config EXAMPLE_ETH_MDIO_GPIO
int "SMI MDIO GPIO number"
default 18
help
Set the GPIO number used by SMI MDIO.
endif
if EXAMPLE_USE_DM9051
config EXAMPLE_DM9051_SPI_HOST
int "SPI Host Number"
range 0 2
default 1
2019-04-10 04:24:50 -04:00
help
Set the SPI host used to communicate with the SPI Ethernet Controller.
config EXAMPLE_DM9051_SCLK_GPIO
int "SPI SCLK GPIO number"
range 0 33
default 19
help
Set the GPIO number used by SPI SCLK.
config EXAMPLE_DM9051_MOSI_GPIO
int "SPI MOSI GPIO number"
range 0 33
default 23
help
Set the GPIO number used by SPI MOSI.
config EXAMPLE_DM9051_MISO_GPIO
int "SPI MISO GPIO number"
range 0 33
default 25
help
Set the GPIO number used by SPI MISO.
config EXAMPLE_DM9051_CS_GPIO
int "SPI CS GPIO number"
range 0 33
default 22
help
Set the GPIO number used by SPI CS.
2019-04-10 04:24:50 -04:00
config EXAMPLE_DM9051_SPI_CLOCK_MHZ
int "SPI clock speed (MHz)"
range 5 80
default 20
help
Set the clock speed (MHz) of SPI interface.
config EXAMPLE_DM9051_INT_GPIO
int "Interrupt GPIO number"
default 4
help
Set the GPIO number used by DM9051 interrupt.
endif
config EXAMPLE_ETH_PHY_RST_GPIO
int "PHY Reset GPIO number"
default 5
help
Set the GPIO number used to reset PHY chip.
Set to -1 to disable PHY chip hardware reset.
config EXAMPLE_ETH_PHY_ADDR
int "PHY Address"
range 0 31 if EXAMPLE_USE_INTERNAL_ETHERNET
range 1 1 if !EXAMPLE_USE_INTERNAL_ETHERNET
default 1
help
Set PHY address according your board schematic.
2019-04-10 04:24:50 -04:00
endmenu