GPTimer (General Purpose Timer) is the driver of {IDF_TARGET_NAME} Timer Group peripheral. The hardware timer features high resolution and flexible alarm action. The behavior when the internal counter of a timer reaches a specific target value is called a timer alarm. When a timer alarms, a user registered per-timer callback would be called.
-:ref:`gptimer-resource-allocation` - covers which parameters should be set up to get a timer handle and how to recycle the resources when GPTimer finishes working.
-:ref:`set-and-get-count-value` - covers how to force the timer counting from a start point and how to get the count value at anytime.
-:ref:`set-up-alarm-action` - covers the parameters that should be set up to enable the alarm event.
-:ref:`gptimer-register-event-callbacks` - covers how to hook user specific code to the alarm event callback function.
-:ref:`enable-and-disable-timer` - covers how to enable and disable the timer.
-:ref:`start-and-stop-timer` - shows some typical use cases that start the timer with different alarm behavior.
:SOC_ETM_SUPPORTED and SOC_TIMER_SUPPORT_ETM:- :ref:`gptimer-etm-event-and-task` - describes what the events and tasks can be connected to the ETM channel.
Different ESP chips might have different numbers of independent timer groups, and within each group, there could also be several independent timers. [1]_
A GPTimer instance is represented by :cpp:type:`gptimer_handle_t`. The driver behind will manage all available hardware resources in a pool, so that you do not need to care about which timer and which group it belongs to.
-:cpp:member:`gptimer_config_t::clk_src` selects the source clock for the timer. The available clocks are listed in :cpp:type:`gptimer_clock_source_t`, you can only pick one of them. For the effect on power consumption of different clock source, please refer to Section :ref:`gptimer-power-management`.
-:cpp:member:`gptimer_config_t::direction` sets the counting direction of the timer, supported directions are listed in :cpp:type:`gptimer_count_direction_t`, you can only pick one of them.
-:cpp:member:`gptimer_config_t::resolution_hz` sets the resolution of the internal counter. Each count step is equivalent to **1 / resolution_hz** seconds.
-:cpp:member:`gptimer_config::intr_priority` sets the priority of the timer interrupt. If it is set to ``0``, the driver will allocate an interrupt with a default priority. Otherwise, the driver will use the given priority.
- Optional :cpp:member:`gptimer_config_t::intr_shared` sets whether or not mark the timer interrupt source as a shared one. For the pros/cons of a shared interrupt, you can refer to :doc:`Interrupt Handling <../../api-reference/system/intr_alloc>`.
With all the above configurations set in the structure, the structure can be passed to :cpp:func:`gptimer_new_timer` which will instantiate the timer instance and return a handle of the timer.
The function can fail due to various errors such as insufficient memory, invalid arguments, etc. Specifically, when there are no more free timers (i.e. all hardware resources have been used up), then :c:macro:`ESP_ERR_NOT_FOUND` will be returned. The total number of available timers is represented by the :c:macro:`SOC_TIMER_GROUP_TOTAL_TIMERS` and its value will depend on the ESP chip.
If a previously created GPTimer instance is no longer required, you should recycle the timer by calling :cpp:func:`gptimer_del_timer`. This will allow the underlying HW timer to be used for other purposes. Before deleting a GPTimer handle, please disable it by :cpp:func:`gptimer_disable` in advance or make sure it has not enabled yet by :cpp:func:`gptimer_enable`.
When the GPTimer is created, the internal counter will be reset to zero by default. The counter value can be updated asynchronously by :cpp:func:`gptimer_set_raw_count`. The maximum count value is dependent on the bit width of the hardware timer, which is also reflected by the SOC macro :c:macro:`SOC_TIMER_GROUP_COUNTER_BIT_WIDTH`. When updating the raw count of an active timer, the timer will immediately start counting from the new value.
Count value can be retrieved by :cpp:func:`gptimer_get_raw_count`, at any time.
For most of the use cases of GPTimer, you should set up the alarm action before starting the timer, except for the simple wall-clock scenario, where a free running timer is enough. To set up the alarm action, you should configure several members of :cpp:type:`gptimer_alarm_config_t` based on how you make use of the alarm event:
-:cpp:member:`gptimer_alarm_config_t::alarm_count` sets the target count value that will trigger the alarm event. You should also take the counting direction into consideration when setting the alarm value. Specially, :cpp:member:`gptimer_alarm_config_t::alarm_count` and :cpp:member:`gptimer_alarm_config_t::reload_count` cannot be set to the same value when :cpp:member:`gptimer_alarm_config_t::auto_reload_on_alarm` is true, as keeping reload with a target alarm count is meaningless.
-:cpp:member:`gptimer_alarm_config_t::reload_count` sets the count value to be reloaded when the alarm event happens. This configuration only takes effect when :cpp:member:`gptimer_alarm_config_t::auto_reload_on_alarm` is set to true.
-:cpp:member:`gptimer_alarm_config_t::auto_reload_on_alarm` flag sets whether to enable the auto-reload feature. If enabled, the hardware timer will reload the value of :cpp:member:`gptimer_alarm_config_t::reload_count` into counter immediately when an alarm event happens.
To make the alarm configurations take effect, you should call :cpp:func:`gptimer_set_alarm_action`. Especially, if :cpp:type:`gptimer_alarm_config_t` is set to ``NULL``, the alarm function will be disabled.
After the timer starts up, it can generate a specific event (e.g. the "Alarm Event") dynamically. If you have some functions that should be called when the event happens, please hook your function to the interrupt service routine by calling :cpp:func:`gptimer_register_event_callbacks`. All supported event callbacks are listed in :cpp:type:`gptimer_event_callbacks_t`:
-:cpp:member:`gptimer_event_callbacks_t::on_alarm` sets a callback function for alarm events. As this function is called within the ISR context, you must ensure that the function does not attempt to block (e.g., by making sure that only FreeRTOS APIs with ``ISR`` suffix are called from within the function). The function prototype is declared in :cpp:type:`gptimer_alarm_cb_t`.
You can save your own context to :cpp:func:`gptimer_register_event_callbacks` as well, via the parameter ``user_data``. The user data will be directly passed to the callback function.
This function will lazy install the interrupt service for the timer but not enable it. So please call this function before :cpp:func:`gptimer_enable`, otherwise the :c:macro:`ESP_ERR_INVALID_STATE` error will be returned. See Section :ref:`enable-and-disable-timer` for more information.
* Acquire a proper power management lock if a specific clock source (e.g. APB clock) is selected. See Section :ref:`gptimer-power-management` for more information.
Calling :cpp:func:`gptimer_disable` will do the opposite, that is, put the timer driver back to the **init** state, disable the interrupts service and release the power management lock.
The basic IO operation of a timer is to start and stop. Calling :cpp:func:`gptimer_start` can make the internal counter work, while calling :cpp:func:`gptimer_stop` can make the counter stop working. The following illustrates how to start a timer with or without an alarm event.
Calling :cpp:func:`gptimer_start` will transit the driver state from **enable** to **run**, and vice versa. You need to make sure the start and stop functions are used in pairs, otherwise, the functions may return :c:macro:`ESP_ERR_INVALID_STATE`. Most of the time, this error means that the timer is already stopped or in the "start protection" state (i.e. :cpp:func:`gptimer_start` is called but not finished).
Alarm value can be updated dynamically inside the ISR handler callback, by changing :cpp:member:`gptimer_alarm_event_data_t::alarm_value`. Then the alarm value will be updated after the callback function returns.
GPTimer is able to generate various events that can interact with the :doc:`ETM </api-reference/peripherals/etm>` module. The supported events are listed in the :cpp:type:`gptimer_etm_event_type_t`. You can call :cpp:func:`gptimer_new_etm_event` to get the corresponding ETM event handle. Likewise, GPTimer exposes several tasks that can be triggered by other ETM events. The supported tasks are listed in the :cpp:type:`gptimer_etm_task_type_t`. You can call :cpp:func:`gptimer_new_etm_task` to get the corresponding ETM task handle.
For how to connect the event and task to an ETM channel, please refer to the :doc:`ETM </api-reference/peripherals/etm>` documentation.
There're some power management strategies, which might turn off or change the frequency of GPTimer's source clock to save power consumption. For example, during DFS, APB clock will be scaled down. If light-sleep is also enabled, PLL and XTAL clocks will be powered off. Both of them can result in an inaccurate time keeping.
The driver can prevent the above situation from happening by creating different power management lock according to different clock source. The driver will increase the reference count of that power management lock in the :cpp:func:`gptimer_enable` and decrease it in the :cpp:func:`gptimer_disable`. So we can ensure the clock source is stable between :cpp:func:`gptimer_enable` and :cpp:func:`gptimer_disable`.
By default, the GPTimer interrupt will be deferred when the cache is disabled because of writing or erasing the flash. Thus the alarm interrupt will not get executed in time, which is not expected in a real-time application.
There is another Kconfig option :ref:`CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM` that can put commonly used IO control functions into IRAM as well. So, these functions can also be executable when the cache is disabled. These IO control functions are as follows:
All the APIs provided by the driver are guaranteed to be thread safe, which means you can call them from different RTOS tasks without protection by extra locks. The following functions are allowed to run under ISR context.
-:ref:`CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM` controls where to place the GPTimer control functions (IRAM or flash).
-:ref:`CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM` controls where to place the GPTimer ISR handler (IRAM or flash).
-:ref:`CONFIG_GPTIMER_ISR_IRAM_SAFE` controls whether the default ISR handler should be masked when the cache is disabled, see Section :ref:`gptimer-iram-safe` for more information.
- Typical use cases of GPTimer are listed in the example :example:`peripherals/timer_group/gptimer`.
:SOC_TIMER_SUPPORT_ETM:- GPTimer capture external event's timestamp, with the help of ETM module: :example:`peripherals/timer_group/gptimer_capture_hc_sr04`.
Different ESP chip series might have different numbers of GPTimer instances. For more details, please refer to *{IDF_TARGET_NAME} Technical Reference Manual* > Chapter *Timer Group (TIMG)* [`PDF <{IDF_TARGET_TRM_EN_URL}#timg>`__]. The driver will not forbid you from applying for more timers, but it will return error when all available hardware resources are used up. Please always check the return value when doing resource allocation (e.g. :cpp:func:`gptimer_new_timer`).
:cpp:member:`gptimer_event_callbacks_t::on_alarm` callback and the functions invoked by the callback should also be placed in IRAM, please take care of them by yourself.
