esp-idf-ssd1306/README.md

esp-idf-ssd1306

SSD1306/SH1106 driver for esp-idf

I used this repository as a reference.
I used this font file.

Installation for ESP32

git clone https://github.com/nopnop2002/esp-idf-ssd1306
cd esp-idf-ssd1306/
idf.py set-target esp32
idf.py menuconfig
idf.py flash

Installation for ESP32-S2

git clone https://github.com/nopnop2002/esp-idf-ssd1306
cd esp-idf-ssd1306/
idf.py set-target esp32s2
idf.py menuconfig
idf.py flash

Installation for ESP32-C3

git clone https://github.com/nopnop2002/esp-idf-ssd1306
cd esp-idf-ssd1306/
idf.py set-target esp32c3
idf.py menuconfig
idf.py flash

Configuration

You have to set this config value with menuconfig.

• CONFIG_INTERFACE
• CONFIG_PANEL
• CONFIG_OFFSETX
• CONFIG_FLIP
• CONFIG_SDA_GPIO
• CONFIG_SCL_GPIO
• CONFIG_RESET_GPIO
• CONFIG_MOSI_GPIO
• CONFIG_SCLK_GPIO
• CONFIG_CS_GPIO
• CONFIG_DC_GPIO

---

Generic SSD1306 128x32 i2c

---

Generic SSD1306 128x64 i2c

---

Generic SH1106 128x64 i2c

Hardware scroll Not support
Left:1.3 inch SH1106
Right:0.96 inch SSD1306

---

128x64 TTGO

Unlike other ESP32 development boards, the RTC_CLOCK crystal on this board uses a 26MHz one.
You need to change the RTC CLOCK frequency to 26MHz using menuconfig.

---

128x64 ESP-WROOM-32

---

Generic SSD1306 128x32 SPI

---

Generic SSD1306 128x64 SPI

D0 is SCLK.
D1 is MOSI.

---

Generic SH1106 128x64 SPI

Hardware scroll Not support
Left:1.3 inch SH1106
Right:0.96 inch SSD1306

---

Flip upside down