mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
157 lines
6.4 KiB
Markdown
157 lines
6.4 KiB
Markdown
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
|
[](https://github.com/RobTillaart/PCF8575/actions/workflows/arduino-lint.yml)
|
|
[](https://github.com/RobTillaart/PCF8575/actions/workflows/jsoncheck.yml)
|
|
[](https://github.com/RobTillaart/PCF8575/blob/master/LICENSE)
|
|
[](https://github.com/RobTillaart/PCF8575/releases)
|
|
|
|
|
|
# PCF8575
|
|
|
|
Arduino library for PCF8575 - 16 channel I2C IO expander.
|
|
|
|
|
|
## Description
|
|
|
|
Related to the PCF8574 8 channel IO expander library https://github.com/RobTillaart/PCF8574.
|
|
|
|
The library gives easy control over the 16 pins of the PCF8575 chips.
|
|
|
|
Base address = 0x20 + 0..7 depending on address pins A0..A2.
|
|
|
|
| TYPE | ADDRESS-RANGE | notes |
|
|
|:---------|:-------------:|:------------------------:|
|
|
|PCF8575 | 0x20 to 0x27 | same range as PCF8574 !! |
|
|
| | | |
|
|
|
|
|
|
So you can connect up to 8 PCF8575 on one I2C bus, giving access
|
|
to 8 x 16 = 128 IO lines.
|
|
To maximize IO lines combine 8 x PCF8575 + 8 x PCF8574A giving
|
|
128 + 64 = 192 IO lines.
|
|
Be sure to have a well dimensioned power supply.
|
|
|
|
The library allows to read and write both single pins or 16 pins at once.
|
|
Furthermore some additional functions are implemented that are playful and useful.
|
|
|
|
|
|
## I2C Clock
|
|
|
|
Testing showed that the PCF8575 still works at 600 KHz and failed at 800 KHz.
|
|
These values are outside the specs of the datasheet so they are not recommended.
|
|
However when performance is needed you can try to overclock the chip.
|
|
|
|
TODO table (see PCF8574)
|
|
|
|
|
|
## Interface
|
|
|
|
**PCF8575_INITIAL_VALUE** is a define that can be set compile time or before
|
|
the include of "pcf8575.h" to overrule the default value used with the
|
|
**begin()** call.
|
|
|
|
|
|
### Constructor
|
|
|
|
- **PCF8575(uint8_t deviceAddress = 0x20, TwoWire \*wire = &Wire)** Constructor with the optional
|
|
I2C device address, default 0x20, and the optional Wire interface as parameter.
|
|
- **bool begin(uint8_t value = PCF8575_INITIAL_VALUE)** set the initial value for the pins and masks.
|
|
- **bool begin(int dataPin, int clockPin, uint8_t value = PCF8575_INITIAL_VALUE)** idem,
|
|
for the ESP32 where one can choose the I2C pins.
|
|
- **bool isConnected()** checks if the address is visible on the I2C bus.
|
|
- **bool setAddress(const uint8_t deviceAddress)** sets the device address after construction.
|
|
Can be used to switch between PCF8575 modules runtime. Note this corrupts internal buffered values,
|
|
so one might need to call **read16()** and/or **write16()**. Returns true if address can be found on I2C bus.
|
|
- **uint8_t getAddress()** returns the device address.
|
|
|
|
|
|
### Read and Write
|
|
|
|
- **uint16_t read16()** reads all 16 pins at once. This one does the actual reading.
|
|
- **uint8_t read(uint8_t pin)** reads a single pin; pin = 0..15.
|
|
- **uint16_t value()** returns the last read inputs again, as this information is buffered
|
|
in the class this is faster than reread the pins.
|
|
- **void write16(uint16_t value)** writes all 16 pins at once. This one does the actual reading.
|
|
- **void write(uint8_t pin, uint8_t value)** writes a single pin; pin = 0..15; value is HIGH(1) or LOW (0).
|
|
- **uint16_t valueOut()** returns the last written data.
|
|
|
|
|
|
### Button
|
|
|
|
The **"button"** functions are to be used when you mix input and output on one IC.
|
|
It does not change / affect the pins used for output by masking these.
|
|
Typical usage is to call **setButtonMask()** once in setup as pins do not (often) change
|
|
during program execution.
|
|
|
|
- **void setButtonMask(const uint16_t mask)** sets the (bit) mask which lines are input.
|
|
- **uint16_t getButtonMask()** returns the set buttonMask.
|
|
- **uint16_t readButton16()** use the mask set by setButtonMask to select specific input pins.
|
|
- **uint16_t readButton16(uint16_t mask)** use a specific mask to select specific input pins.
|
|
Note this can be a subset of the pins set with **setButtonMask()** if one wants to process not all.
|
|
- **uint8_t readButton(uint8_t pin)** read a singe input pin.
|
|
|
|
Background - https://github.com/RobTillaart/Arduino/issues/38
|
|
|
|
|
|
### Special
|
|
|
|
- **void toggle(uint8_t pin)** toggles a single pin.
|
|
- **void toggleMask(uint16_t mask)** toggles a selection of pins,
|
|
if you want to invert all pins use 0xFFFF (default value).
|
|
- **void shiftRight(uint8_t n = 1)** shifts output channels n pins (default 1) pins right (e.g. LEDs ).
|
|
Fills the higher lines with zero's.
|
|
- **void shiftLeft(uint8_t n = 1)** shifts output channels n pins (default 1) pins left (e.g. LEDs ).
|
|
Fills the lower lines with zero's.
|
|
- **void rotateRight(uint8_t n = 1)** rotates output channels to right, moving lowest line to highest line.
|
|
- **void rotateLeft(uint8_t n = 1)** rotates output channels to left, moving highest line to lowest line.
|
|
- **void reverse()** reverse the "bit pattern" of the lines, swapping pin 15 with 0, 14 with 1, 13 with 2 etc..
|
|
|
|
|
|
### Select
|
|
|
|
Some convenience wrappers.
|
|
|
|
- **void select(const uint8_t pin)** sets a single pin to HIGH, all others are set to LOW.
|
|
If pin > 15 all pins are set to LOW.
|
|
Can be used to select one of n devices.
|
|
- **void selectN(const uint8_t pin)** sets pins 0..pin to HIGH, all others are set to LOW.
|
|
If pin > 15 all pins are set to LOW.
|
|
This can typical be used to implement a VU meter.
|
|
- **void selectNone()** sets all pins to LOW.
|
|
- **void selectAll()** sets all pins to HIGH.
|
|
|
|
|
|
### Miscellaneous
|
|
|
|
- **int lastError()** returns the last error from the lib. (see .h file).
|
|
|
|
|
|
## Error codes
|
|
|
|
| name | value | description |
|
|
|:-------------------|:-----:|:------------------------|
|
|
| PCF8575_OK | 0x00 | no error |
|
|
| PCF8575_PIN_ERROR | 0x81 | pin number out of range |
|
|
| PCF8575_I2C_ERROR | 0x82 | I2C communication error |
|
|
|
|
|
|
## Testing
|
|
|
|
Testing the initial library is done by Colin Mackay (thanks!).
|
|
Platforms used for testing include: Nano, ESP32 and Seeed Xiao.
|
|
|
|
|
|
## Operation
|
|
|
|
See examples.
|
|
|
|
It is advised to use pull-up or pull-down resistors so the lines have a defined state at startup.
|
|
|
|
|
|
## Future
|
|
|
|
- update documentation.
|
|
- keep in sync with pcf8574 (as far as meaningful)
|
|
- **value()** => **lastRead16()** ??
|
|
|