GY-63_MS5611/libraries/uv-sensor/README.md
2023-01-23 17:06:45 +01:00

70 lines
2.9 KiB
Markdown

[![Arduino CI](https://github.com/RobTillaart/uv-sensor/workflows/Arduino%20CI/badge.svg)](https://github.com/marketplace/actions/arduino_ci)
[![Arduino-lint](https://github.com/RobTillaart/uv-sensor/actions/workflows/arduino-lint.yml/badge.svg)](https://github.com/RobTillaart/uv-sensor/actions/workflows/arduino-lint.yml)
[![JSON check](https://github.com/RobTillaart/uv-sensor/actions/workflows/jsoncheck.yml/badge.svg)](https://github.com/RobTillaart/uv-sensor/actions/workflows/jsoncheck.yml)
[![License: MIT](https://img.shields.io/badge/license-MIT-green.svg)](https://github.com/RobTillaart/uv-sensor/blob/master/LICENSE)
[![GitHub release](https://img.shields.io/github/release/RobTillaart/uv-sensor.svg?maxAge=3600)](https://github.com/RobTillaart/uv-sensor/releases)
# uv-sensor
Arduino sketch for analog UV sensor.
## Description
![Foo](https://www.tinytronics.nl/shop/image/cache/catalog/products/product-003601/uv-light-sensor-module-200-370nm-80x80w.jpg)
Image courtesy Tinytronics
This small (type-less) UV-sensor is powered by 3.3 .. 5 V so it can be used by almost any microprocessor.
The sensor has an analogue output that is roughly linear with the UV-index (sunlight assumed, see notes)
| Voltage | UV index | risk of harm | Colour |
|:---------:|:----------:|:---------------|:---------:|
| <0.050 | 0 | low | Green |
| 0.227 | 1 | low | Green |
| 0.318 | 2 | low | Green |
| 0.408 | 3 | moderate | Yellow |
| 0.503 | 4 | moderate | Yellow |
| 0.606 | 5 | moderate | Yellow |
| 0.696 | 6 | high | Orange |
| 0.795 | 7 | high | Orange |
| 0.881 | 8 | very high | Red |
| 0.976 | 9 | very high | Red |
| 1.079 | 10 | very high | Red |
| 1.170> | 11 | extreme | Purple |
From this table the formula is derived (spreadsheet) which is pretty linear between UV 1 and 11.
There is an extended library version which has more functionality and documentation.
- https://github.com/RobTillaart/AnalogUVSensor
### Notes
Note: The sensor is not calibrated and the table is indicative for sunlight (assumption!)
and therefore not suitable for e.g. medical or industrial usage.
Note: UV radiation will not go through glass, so inside you will most likely always read zero.
This may help to calibrate the zero level of the sensor.
Note: depending on the light source used, the table above is incorrect.
#### Sensitivity
The sensor is sensitive for wavelengths from 200 - 370 nm, so mostly in UVB and UVA region and less in the UVC.
https://en.wikipedia.org/wiki/Ultraviolet
## Future
Future development will be done in the library version only.
- https://github.com/RobTillaart/AnalogUVSensor