mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
112 lines
3.7 KiB
Markdown
112 lines
3.7 KiB
Markdown
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
|
[](https://github.com/RobTillaart/DAC8554/actions/workflows/arduino-lint.yml)
|
|
[](https://github.com/RobTillaart/DAC8554/actions/workflows/jsoncheck.yml)
|
|
[](https://github.com/RobTillaart/DAC8554/blob/master/LICENSE)
|
|
[](https://github.com/RobTillaart/DAC8554/releases)
|
|
|
|
# DAC8554
|
|
|
|
Arduino library for DAC8554 SPI Digital Analog Convertor.
|
|
|
|
|
|
## Description
|
|
|
|
The DAC8554 is a SPI based 16 bit DAC with four channels.
|
|
|
|
**Warning** This library is not tested extensively
|
|
|
|
|
|
## Interface
|
|
|
|
### Core
|
|
|
|
- **DAC8554(uint8_t slaveSelect, uint8_t address = 0)** Constructor for hardware SPI,
|
|
since 0.2.0 the slaveSelect pin needs to be defined.
|
|
- **DAC8554(uint8_t spiData, uint8_t spiClock, uint8_t slaveSelect, uint8_t address = 0)**
|
|
Constructor for the software SPI
|
|
- **void begin()** initializes all pins to default state
|
|
- **void setValue(uint8_t channel, uint16_t value)** set the value of the channel to 0 - 65535
|
|
- **void setSingleValue(uint8_t channel, uint16_t value)** writes the value to the channel but
|
|
does not affect buffered ones. TODO - elaborate.
|
|
- **uint16_t getValue(uint8_t channel)** returns the last value written.
|
|
|
|
|
|
### Hardware SPI
|
|
|
|
To be used only if one needs a specific speed.
|
|
|
|
- **void setSPIspeed(uint32_t speed)** set SPI transfer rate.
|
|
- **uint32_t getSPIspeed()** returns SPI transfer rate.
|
|
- **bool usesHWSPI()** returns true if HW SPI is used.
|
|
|
|
|
|
### ESP32 specific
|
|
|
|
- **void selectHSPI()** in case hardware SPI, the ESP32 has two options HSPI and VSPI.
|
|
- **void selectVSPI()** see above.
|
|
- **bool usesHSPI()** returns true if HSPI is used.
|
|
- **bool usesVSPI()** returns true if VSPI is used.
|
|
|
|
The **selectVSPI()** or the **selectHSPI()** needs to be called
|
|
BEFORE the **begin()** function.
|
|
|
|
|
|
#### experimental
|
|
|
|
- **void setGPIOpins(uint8_t clk, uint8_t miso, uint8_t mosi, uint8_t select)**
|
|
overrule GPIO pins of ESP32 for hardware SPI.
|
|
Needs to be called AFTER the **begin()** function.
|
|
|
|
|
|
### Power down
|
|
|
|
Check datasheet for details.
|
|
|
|
- **void setPowerDown(uint8_t powerDownMode)** sets power down mode. 0 - 3.
|
|
- **uint8_t getPowerDownMode()** returns last written mode.
|
|
- **void setSinglePowerDown(uint8_t channel, uint8_t powerDownMode)** does not affect other channels.
|
|
|
|
| Power down mode | Value |
|
|
|:----------------------------|:-----:|
|
|
| DAC8554_POWERDOWN_NORMAL | 0x00 |
|
|
| DAC8554_POWERDOWN_1K | 0x40 |
|
|
| DAC8554_POWERDOWN_100K | 0x80 |
|
|
| DAC8554_POWERDOWN_HIGH_IMP | 0xC0 |
|
|
|
|
|
|
### Broadcast
|
|
|
|
- **void bufferValue(uint8_t channel, uint16_t value)** prepare a new value for a channel.
|
|
- **void broadcastBuffer()** write all buffers to all(up to 4) 8554's channel's.
|
|
- **void broadcastValue(uint16_t value)** write value to all(up to 4) 8554's channel's.
|
|
- **void broadcastPowerDown(uint8_t powerDownMode)** write powerDownMode to all 8554's channel's.
|
|
|
|
|
|
## Operation
|
|
|
|
See examples
|
|
|
|
**demo_hw_spi.ino**
|
|
- write a sawtooth to channel A followed by a sinus
|
|
- uses HW SPI
|
|
|
|
**demo_sw_spi.ino**
|
|
- write a sawtooth to channel A followed by a sinus
|
|
- uses SW SPI
|
|
|
|
**demo_same_time_write.ino**
|
|
- writes two square waves that trigger at the same time
|
|
|
|
**demo_sequential_write.ino**
|
|
- writes two square waves sequentially (slight time difference)
|
|
|
|
**demo_powerdown.ino**
|
|
- idem
|
|
|
|
|
|
## Future
|
|
|
|
- testing
|
|
|