mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
3.2 KiB
3.2 KiB
MCP23S08
Arduino library for MCP23S08 8 channel SPI port expander.
Description
This experimental library gives easy control over the 8 pins of a (SPI) MCP23S08 chip.
This IC is strongly related to the MCP23017 I2C port expander - https://github.com/RobTillaart/MCP23017_RT Programming Interface is kept the same as much as possible.
Interface
Constructor
- MCP23S08(uint8_t select, uint8_t data, uint8_t clock) constructor SW SPI.
- MCP23S08(uint8_t select) constructor HW SPI.
- bool begin() returns true if successful.
- bool isConnected() returns true if connected, false otherwise. (dummy)
Single pin interface
- bool pinMode(uint8_t pin, uint8_t mode) pin = 0..7, mode = INPUT, OUTPUT, returns true if successful.
- bool digitalWrite(uint8_t pin, uint8_t value) pin = 0..7, value = LOW(0) HIGH (!0), returns true if successful.
- uint8_t digitalRead(uint8_t pin) pin = 0..7, returns LOW or HIGH, might set the lastError();
- bool setPolarity(uint8_t pin, bool reversed) pin = 0..7, set reversed flag, returns true if successful.
- bool getPolarity(uint8_t pin, bool &reversed) pin = 0..7, reads reversed flag, returns true if successful.
- bool setPullup(uint8_t pin, bool pullup) pin = 0..7, set pull-up flag, returns true if successful.
- bool getPullup(uint8_t pin, bool &pullup) pin = 0..7, reads pull-up flag, returns true if successful.
8 pins interface
- bool pinMode8(uint8_t value) value = 0..255, returns true if successful.
- bool write8(uint8_t value) value = 0..255, returns true if successful.
- uint8_t read8() reads 8 pins into one byte.
- bool setPolarity8(uint8_t mask) sets polarity for 8 channels at once.
- bool getPolarity8(uint8_t &mask) reads polarity of 8 channels at once.
- bool setPullup8(uint8_t mask) sets pull-up for 8 channels at once.
- bool getPullup8(uint8_t &mask) reads pull-up for 8 channels at once.
Error codes
- int lastError() Above functions set an error flag that can be read with this function.
Reading it will reset the flag to MCP23S08_OK.
| DESCRIPTION | VALUE |
|---|---|
| MCP23S08_OK | 0x00 |
| MCP23S08_PIN_ERROR | 0x81 |
| MCP23S08_I2C_ERROR | 0x82 |
| MCP23S08_VALUE_ERROR | 0x83 |
| MCP23S08_PORT_ERROR | 0x84 |
Operation
See examples.
Future
- keep functional in sync with MCP23017_RT
- isConnected() is not really needed