mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
57 lines
2.0 KiB
Markdown
57 lines
2.0 KiB
Markdown
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
|
[](https://github.com/RobTillaart/Optoma/actions/workflows/arduino-lint.yml)
|
|
[](https://github.com/RobTillaart/Optoma/actions/workflows/jsoncheck.yml)
|
|
[](https://github.com/RobTillaart/Optoma/blob/master/LICENSE)
|
|
[](https://github.com/RobTillaart/Optoma/releases)
|
|
|
|
|
|
# Optoma
|
|
|
|
Arduino library to control Optoma W305ST beamer over RS232.
|
|
|
|
|
|
## Description
|
|
|
|
The Optoma library contains functions that help to control
|
|
the beamer from an Arduino.
|
|
|
|
The library is tested with an UNO and an Optoma W305ST Beamer.
|
|
The commands can work on other Optoma Beamers.
|
|
|
|
Command structure
|
|
```
|
|
~XXnnn parameter
|
|
|
|
~ start command
|
|
XX 2 digit ID
|
|
nnn command can be up to 3 char/digit
|
|
space space
|
|
param parameters, depend on command
|
|
\r end command
|
|
```
|
|
|
|
|
|
## Interface
|
|
|
|
The following functions are implemented:
|
|
|
|
- **Optoma(HardwareSerial\* stream = &Serial)** constructor, default uses Serial,
|
|
other HW or SW Serial are possible.
|
|
- **void init(int ID, uint32_t baudRate = 9600)** default baud rate = 9600.
|
|
The ID is used to address a specific beamer.
|
|
In theory one could have multiple beamers on one RS232 port (never seen or tested).
|
|
- **uint32_t getBaudrate()** return set baud rate.
|
|
- **void switchOn()** idem.
|
|
- **void switchOff()** idem.
|
|
- **bool isOn()** idem.
|
|
- **void increaseVKS()** VKS - Vertical KeyStone. check datasheet.
|
|
- **void decreaseVKS()** VKS - Vertical KeyStone. check datasheet.
|
|
|
|
|
|
## Future
|
|
|
|
- More functionality will be added on a need to basis.
|
|
- Create examples.
|
|
|