mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
99 lines
3.1 KiB
Markdown
99 lines
3.1 KiB
Markdown
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
|
[](https://github.com/RobTillaart/HC4052/actions/workflows/arduino-lint.yml)
|
|
[](https://github.com/RobTillaart/HC4052/actions/workflows/jsoncheck.yml)
|
|
[](https://github.com/RobTillaart/HC4052/blob/master/LICENSE)
|
|
[](https://github.com/RobTillaart/HC4052/releases)
|
|
|
|
|
|
# HC4052
|
|
|
|
HC4052 is an Arduino library for a HC4052 2 x 4 channel multiplexer.
|
|
|
|
|
|
## Description
|
|
|
|
HC4052 is a library to control the CD74HC4052 8 channel
|
|
multiplexer / demultiplexer and compatible devices.
|
|
|
|
The HC4052 allows e.g one analog port read up to 8 different analog channels,
|
|
or one digital port to read the state of 8 buttons.
|
|
|
|
|
|
The channel selection is done with four select lines **A, B, C**
|
|
|
|
The device can be enabled/disabled by the enable line **INH**
|
|
|
|
|
|
#### Compatibles
|
|
|
|
to elaborate.
|
|
|
|
|
|
#### Related to
|
|
|
|
- https://github.com/RobTillaart/HC4051 (1x8 mux)
|
|
- https://github.com/RobTillaart/HC4052 (2x8 mux)
|
|
- https://github.com/RobTillaart/HC4053 (3x2 mux)
|
|
- https://github.com/RobTillaart/HC4067 (1x16 mux)
|
|
|
|
|
|
## Hardware connection
|
|
|
|
Typical connection is to connect the four **select pins** to four IO Pins of your board.
|
|
|
|
The optional **enablePin (INH)** must be connected to GND if not used.
|
|
This way the device is continuous enabled.
|
|
|
|
Example multiplexing analog in.
|
|
|
|
```
|
|
processor HC4052
|
|
+-------------+ +-------------+
|
|
| | | |
|
|
| A |------------->| A X0 |
|
|
| B |------------->| B X1 |
|
|
| enable |------------->| INH X2 |
|
|
| | | X3 |
|
|
| analog in |<-------------| X |
|
|
| | | |
|
|
| analog in |<-------------| Y Y0 |
|
|
| | | Y1 |
|
|
| GND |--------------| GND Y2 |
|
|
| | | VCC Y3 |
|
|
| | | |
|
|
+-------------+ +-------------+
|
|
```
|
|
|
|
|
|
## Interface
|
|
|
|
```cpp
|
|
#include "HC4052.h"
|
|
```
|
|
|
|
#### Core
|
|
|
|
- **HC4052(uint8_t A, uint8_t B, uint8_t enablePin = 255)** constructor.
|
|
Set the two select pins and optional the enable pin.
|
|
If the enablePin == 255 it is considered not used.
|
|
- **void setChannel(uint8_t channel)** set the current channel.
|
|
Valid values 0..3, this value is not checked, only the lower 2 bits will be used.
|
|
- **uint8_t getChannel()** get current channel 0..3.
|
|
|
|
|
|
#### Enable
|
|
|
|
These functions work only if enablePin is set in the constructor.
|
|
|
|
- **void enable()** idem.
|
|
- **void disable()** idem.
|
|
- **bool isEnabled()** idem.
|
|
Also returns true if enablePin is not set.
|
|
|
|
|
|
## Future
|
|
|
|
- keep in sync with HC4067 et.al.
|
|
|