ParallelPrinter

Arduino library that implements a parallel printer (driver) - implements the PRINT interface.

Description

This library defines a parallel printer object.

It implements the Print interface to be able to print all data types using write(), print() and println(). The printer writes every byte over 8 parallel lines including a STROBE (clock) pulse, while waiting for the connected printer not to be BUSY or OUT OF PAPER (OOP).

This library is meant to be a starting point to make a "printer driver" for a specific parallel printer. These can often be bought in 2nd hand stores or so.

Have fun!

Note: This lib is a extended redo of the ParPrinter class.

Interface

Constructor

ParallelPrinter() uses default pins (13, 2, 12, [3,4,5,6,7,8,9,10])
ParallelPrinter(uint8_t strobe, uint8_t busy, uint8_t oop, uint8_t *arr) define 3 control pins + 8 data pins (= arr[8]).
void begin(uint8_t lineLength, uint8_t pageLength) set line and page length parameters

Print interface

size_t write(uint8_t c) send a single byte to printer, implements Print interface. Therefore all print() and println() functions will work.
void formfeed() to eject current page or forced go to the next page.
void linefeed() send a linefeed. The number of actual lines is set by setLineFeed()

Configuration

These settings are pretty straightforward.

void setLineLength(uint8_t lineLength) idem
uint8_t getLineLength() returns the current line length.
void setPageLength(uint8_t pageLength) idem
uint8_t getPageLength() returns the current page length.
uint8_t getLineNumber() returns current line number.
uint8_t getPageNumber() returns current page number.
uint8_t getPosition() returns the position on a line.
uint8_t setTabSize(uint8_t tabsize) tabs are replaced by spaces. n can be 0 or any size!
uint8_t getTabSize() returns tabSize set
void setLineFeed(uint8_t lineFeeds) lineFeeds = 1,2,3 1 = default.
uint8_t getLineFeed() returns lineFeeds set
void printLineNr(bool b) can be set to true, false.

Expert mode

bool isOutOfPaper() to check paper tray before printing starts.
void setStrobeDelay(uint16_t n = 2000) allows tuning of performance. Make the strobe pulse shorter == faster printing (printer dependant). Default value = 2000. Time in microseconds.
uint16_t getStrobeDelay() returns value set.

Note mechanical printers e.g. dot matrix, really do need a way to stop receiving data as they do not have large buffers.

Future

update documentation
extend unit tests?
test more.
extend simulator sketch.
- Make a front end of a parallel printer,
- Accepts the clocked bytes and print them e.g. over serial.
derive e.g. an HP or an EPSON printer from this class.
- special modes e.g. bold italic underline.
write(uint8_t * buf, uint8_t length) should be added
- might not really add to performance..
fix blocking TODO in sendByte

Operation

See examples.

3.9 KiB Raw Blame History