mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
205 lines
7.8 KiB
Markdown
205 lines
7.8 KiB
Markdown
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
|
[](https://github.com/RobTillaart/AD5144A/actions/workflows/arduino-lint.yml)
|
|
[](https://github.com/RobTillaart/AD5144A/actions/workflows/jsoncheck.yml)
|
|
[](https://github.com/RobTillaart/AD5144A/blob/master/LICENSE)
|
|
[](https://github.com/RobTillaart/AD5144A/releases)
|
|
|
|
|
|
# AD5144A
|
|
|
|
Arduino library for **I2C AD5144A** 4 channel digital potentiometer.
|
|
|
|
|
|
## Description
|
|
|
|
The library is an experimental library for the **I2C AD5144A** 4 channel digital potentiometer.
|
|
- it is not tested extensively, (AD5144A partly)
|
|
- so use at own risk, and
|
|
- please report problems and/or success.
|
|
|
|
From the datasheet it is expected that the library will work more or less
|
|
for the family of related AD devices. However as said before this is not tested.
|
|
If there are problems, please file an issue.
|
|
|
|
This library uses the **I2C** interface to communicate with the device.
|
|
It does not work for the **SPI** versions of these devices.
|
|
See Future below.
|
|
|
|
|
|
## I2C
|
|
|
|
For the selection of the address, see table 12 / 13 datasheet.
|
|
|
|
The AD5144A devices support standard 100 kHz, and fast 400 kHz, data transfer modes.
|
|
|
|
|
|
## Interface
|
|
|
|
The library has a number of functions which are all quite straightforward.
|
|
|
|
As the library is experimental, function signatures might change in the future.
|
|
|
|
|
|
### Constructors
|
|
|
|
- **AD51XX(uint8_t address, TwoWire \*wire = &Wire)** base class, to set the I2C address and optional the Wire bus used.
|
|
This class does not distinguish between the derived classes.
|
|
The developer is responsible for handling this correctly when using the base class.
|
|
|
|
| device | #potmeters | # rheostats | range | tested |
|
|
|:--------|:-----------:|:-----------:|:------:|:-------:|
|
|
| AD5123 | 2 | 2 | 0..127 | no |
|
|
| AD5124 | 4 | 0 | 0..127 | no |
|
|
| AD5143 | 2 | 2 | 0..255 | no |
|
|
| AD5144 | 4 | 0 | 0..255 | partial |
|
|
| AD5144A | 4 | 0 | 0..255 | partial |
|
|
| AD5122A | 2 | 0 | 0..127 | no |
|
|
| AD5142A | 2 | 0 | 0..255 | no |
|
|
| AD5121 | 1 | 0 | 0..127 | no |
|
|
| AD5141 | 1 | 0 | 0..255 | no |
|
|
|
|
Derived classes:
|
|
|
|
- **AD5123(uint8_t address, TwoWire \*wire = &Wire)**
|
|
- **AD5124(uint8_t address, TwoWire \*wire = &Wire)**
|
|
- **AD5143(uint8_t address, TwoWire \*wire = &Wire)**
|
|
- **AD5144(uint8_t address, TwoWire \*wire = &Wire)**
|
|
- **AD5144A(uint8_t address, TwoWire \*wire = &Wire)**
|
|
- **AD5122A(uint8_t address, TwoWire \*wire = &Wire)**
|
|
- **AD5142A(uint8_t address, TwoWire \*wire = &Wire)**
|
|
- **AD5121(uint8_t address, TwoWire \*wire = &Wire)**
|
|
- **AD5141(uint8_t address, TwoWire \*wire = &Wire)**
|
|
|
|
|
|
### I2C / device initialization
|
|
|
|
- **bool begin(uint8_t sda, uint8_t scl)** ESP32 a.o initializing of Wire.
|
|
Returns true if the address of the device can be found on the I2C bus.
|
|
- **bool begin()** for UNO, returns true if the address of the device can be found on the I2C bus.
|
|
- **bool isConnected()** returns true if the address of the device can be found on the I2C bus.
|
|
- **uint8_t reset()** calls the built in RESET command, check datasheet for details,
|
|
|
|
|
|
### Basic IO
|
|
|
|
Used to set one channel at the time.
|
|
|
|
- **uint8_t write(uint8_t rdac, uint8_t value)** set channel rdac 0..3 to value 0..255 (depending on type less channels and lower max value should be used)
|
|
The value is also written into a cache of last set values for fast retrieval later.
|
|
If value > maxValue an error **AD51XXA_INVALID_VALUE** is returned.
|
|
- **uint8_t read(uint8_t rdac)** read back set value from the **cache**, not from the device.
|
|
|
|
|
|
### EEPROM
|
|
|
|
The value stored in the EEPROM is the value the 4 potmeters will start at boot time.
|
|
This allows to start at predefined values and makes it possibly easier to continue after
|
|
a reboot.
|
|
|
|
- **uint8_t storeEEPROM(uint8_t rdac)** store the current channel value in EEPROM.
|
|
- **uint8_t storeEEPROM(uint8_t rdac, uint8_t value)** store a specific (new) value in EEPROM.
|
|
If value > maxValue an error **AD51XXA_INVALID_VALUE** is returned.
|
|
- **uint8_t recallEEPROM(uint8_t rdac)** get the value from EEPROM and set the channel.
|
|
|
|
|
|
### Async
|
|
|
|
Sets values in sequence, not at exact same time
|
|
|
|
- **uint8_t writeAll(uint8_t value)** write the same value to all channels.
|
|
If value > maxValue an error **AD51XXA_INVALID_VALUE** is returned.
|
|
- **uint8_t zeroAll()** sets all channels to 0
|
|
- **uint8_t midScaleAll()** sets all channels to their midpoint 128 / 64
|
|
- **uint8_t maxAll()** sets all channels to the max 255 / 127
|
|
- **uint8_t zero(uint8_t rdac)** sets one channel to 0
|
|
- **uint8_t midScale(uint8_t rdac)** sets one channel to its midpoint = 128 / 64
|
|
- **uint8_t maxValue(uint8_t rdac)** sets one channel to the max 255 / 127
|
|
|
|
|
|
### Sync
|
|
|
|
- **uint8_t preload(uint8_t rdac, uint8_t value)** prepare a single rdac for a new value but only use it after **sync()** is called.
|
|
If value > maxValue an error **AD51XXA_INVALID_VALUE** is returned.
|
|
- **uint8_t preloadAll(uint8_t value)** prepare all rdacs with the same value, and wait for **sync()**.
|
|
If value > maxValue an error **AD51XXA_INVALID_VALUE** is returned.
|
|
- **uint8_t sync(uint8_t mask)** will transfer the preloaded values to the (4) rdacs at the very same moment.
|
|
The 4-bit mask is used to select which rdacs to sync.
|
|
|
|
|
|
### TopScale BottomScale
|
|
|
|
See page 27 datasheet
|
|
|
|
- **uint8_t setTopScale(uint8_t rdac)**
|
|
- **uint8_t clrTopScale(uint8_t rdac)**
|
|
- **uint8_t setTopScaleAll()**
|
|
- **uint8_t clrTopScaleAll()**
|
|
- **uint8_t setBottomScale(uint8_t rdac)**
|
|
- **uint8_t clrBottomScale(uint8_t rdac)**
|
|
- **uint8_t setBottomScaleAll()**
|
|
- **uint8_t clrBottomScaleAll()**
|
|
|
|
|
|
### Operational modes
|
|
|
|
See page 27-28 datasheet
|
|
|
|
- **uint8_t setLinearMode(uint8_t rdac)**
|
|
- **uint8_t setPotentiometerMode(uint8_t rdac)**
|
|
- **// 0 = potentio, 1 = linear
|
|
- **uint8_t getOperationalMode(uint8_t rdac)**
|
|
- **uint8_t incrementLinear(uint8_t rdac)**
|
|
- **uint8_t incrementLinearAll()**
|
|
- **uint8_t decrementLineair(uint8_t rdac)**
|
|
- **uint8_t decrementLineairAll()**
|
|
- **uint8_t increment6dB(uint8_t rdac)**
|
|
- **uint8_t increment6dBAll()**
|
|
- **uint8_t decrement6dB(uint8_t rdac)**
|
|
- **uint8_t decrement6dBAll()**
|
|
|
|
|
|
### ReadBack
|
|
|
|
These function read back from the internal registers of the actual device.
|
|
|
|
- **uint8_t readBackINPUT(uint8_t rdac)** reads back the "preload value" in the INPUT register.
|
|
- **uint8_t readBackEEPROM(uint8_t rdac)** reads the **boot value** for the selected rdac from EEPROM.
|
|
- **uint8_t readBackCONTROL(uint8_t rdac)** read back the control register. Read the datasheet for the details of the individual bits.
|
|
- **uint8_t readBackRDAC(uint8_t rdac)** reads the value of the rdac from the device.
|
|
|
|
|
|
### Write control register
|
|
|
|
- **uint8_t writeControlRegister(uint8_t mask)** writes to the control register.
|
|
Read the datasheet for the details of the individual bits.
|
|
**Warning** use with care!
|
|
|
|
|
|
### Misc
|
|
|
|
- **uint8_t pmCount()** returns the number of potentiometers / channels the device has.
|
|
Useful when writing your own loops over all channels.
|
|
- **uint8_t maxValue()** return maxValue (127 / 255) of the potentiometer.
|
|
- **uint8_t shutDown()** check datasheet, not tested yet, use at own risk.
|
|
|
|
|
|
## Operation
|
|
|
|
The examples show the basic working of the functions.
|
|
|
|
|
|
## Future
|
|
|
|
**must**
|
|
- update documentation
|
|
- some functions can be performance optimized
|
|
- writing a value is not needed if last value is the same?
|
|
|
|
**could**
|
|
- improve unit testing CI
|
|
- more testing with hw
|
|
- SPI based version of the library ?
|
|
|
|
|