mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
92 lines
3.5 KiB
Markdown
92 lines
3.5 KiB
Markdown
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
|
[](https://github.com/RobTillaart/Stopwatch_RT/actions/workflows/arduino-lint.yml)
|
|
[](https://github.com/RobTillaart/Stopwatch_RT/actions/workflows/jsoncheck.yml)
|
|
[](https://github.com/RobTillaart/Stopwatch_RT/blob/master/LICENSE)
|
|
[](https://github.com/RobTillaart/Stopwatch_RT/releases)
|
|
|
|
|
|
# Stopwatch_RT
|
|
|
|
Arduino Library implementing a stopwatch including seconds, milliseconds microseconds.
|
|
|
|
|
|
## Description
|
|
|
|
The stopwatch class allows one to create a stopwatch with 4 levels of resolution:
|
|
- **MICROS** - microseconds
|
|
- **MILLIS** - milliseconds (default)
|
|
- **SECONDS** - seconds
|
|
- **MINUTES** - minutes (added 0.2.0)
|
|
|
|
Note that the resolution chosen implies the finest granularity of units measured.
|
|
E.g. if chosen minutes then one cannot measure half (30 sec) or other part of a minute.
|
|
|
|
The resolution is typically set in the constructor, however since 0.2.0 one can call
|
|
**setResolution()** to change the 'tick unit' of the clock runtime.
|
|
This way one can reuse the stopwatch object without creating a new one and thereby
|
|
save some memory.
|
|
|
|
**Warning:** Changing the resolution will reset the stopwatch
|
|
as start time and stop time will become meaningless.
|
|
The stopwatch will reset even when the resolution is the current resolution.
|
|
|
|
This library is based upon millis() and micros() and therefore has the same
|
|
restrictions and limitations as these functions with respect to overflow and precision.
|
|
This means minutes and seconds will overflow also after about 49 days.
|
|
|
|
|
|
## Interface
|
|
|
|
|
|
### Core
|
|
|
|
- **StopWatch(Resolution resolution = MILLIS)** constructor, with default resolution.
|
|
- **void start()** start counting
|
|
- **void stop()** stop counting
|
|
- **uint32_t elapsed()** returns the time in chosen units since last **start()**
|
|
- **void reset()** resets the counting to 0.
|
|
|
|
The use of value() is depreciated, use **elapsed()** instead.
|
|
|
|
|
|
### Status
|
|
|
|
- **bool isRunning()** returns true if clock is counting.
|
|
- **enum state()** returns RESET, RUNNING or STOPPED.
|
|
- **void setResolution(Resolution resolution)** changes the resolution of the stopwatch and resets it.
|
|
Even when called with the current resolution a reset will take place.
|
|
- **enum resolution()** returns MICROS, MILLIS, SECONDS or MINUTES.
|
|
|
|
|
|
### Printable
|
|
|
|
As the stopwatch implements the printable interface since version 0.3.1 one can call
|
|
```cpp
|
|
Serial.println(stopwatch);
|
|
```
|
|
|
|
To get output like "115 ms" or "159753 us" including the units.
|
|
|
|
|
|
### Calibration
|
|
|
|
If processors internal clock are not accurately enough, one can adjust two constants in the StopWatch.h file. Use ar own risk..
|
|
|
|
- **STOPWATCH_SECONDS_DIVIDER** default 1000
|
|
- **STOPWATCH_MINUTES_DIVIDER** default 60000
|
|
|
|
|
|
## Operation
|
|
|
|
See examples
|
|
|
|
|
|
## Future
|
|
|
|
- with rising of faster processors in Arduino ecosystem,
|
|
NANOS might added. Be aware that these short time frames are better measured e.g. by a hardware timer.
|
|
- create getters and setters for the calibration constants so they can
|
|
changed runtime under program control. Must it be float + round() or uint32_t ?
|
|
-
|