GY-63_MS5611/libraries/UUID/README.md
2022-06-16 09:37:59 +02:00

5.3 KiB

Arduino CI Arduino-lint JSON check License: MIT GitHub release

UUID

Arduino library for generating UUID strings.

Description

This experimental library provides a UUID generator. A UUID is an Universally Unique IDentifier of 128 bits. These are typically written in the following format, defined in RFC 4122.

    0ac82d02-002b-4ccb-b96c-1c7839cbc4c0
                  ^    ^

The length is 32 hexadecimal digits + four hyphens = 36 characters. Note that the hexadecimal digits are lower case.

The 0.1.1 version of the lib tries to follow the RFC4122, for version 4 (random generated) and variant 1. In the format above the version 4 is indicated by the first arrow and must be 4. The variant 1 is at the position of the second arrow. This nibble must be 8,9, a or b. All the remaining bits are random.

The basis for the UUID class is a Marsaglia pseudo random number generator. This PRNG must be seeded with two real random uint32_t to get real random UUID's.

Often one sees also the term GUID = Globally Unique Identifier.

Tested on Arduino UNO only.

Interface

UUID class

Use #include "UUID.h"

The UUID class has only a few methods.

  • UUID() Constructor, initializes internals an generates a default UUID.
  • void seed(uint32_t s1, uint32_t s2 = 0) reseeds the internal pseudo random number generator. It is mandatory to set s1 while s2 is optional. The combination {0, 0} is not allowed and overruled in software.
  • void generate() generates a new UUID depending on the mode.
    • UUID_MODE_RANDOM: all UUID bits are random.
    • UUID_MODE_VARIANT4: the UUID (tries to) conform to version 4 variant 1. See above.
  • char * toCharArray() returns a pointer to a char buffer representing the last generated UUID. Multiple subsequent calls to toCharArray() gives the same UUID until generate() is called again.

Mode

Only two modi are supported. Default is the UUID_MODE_VARIANT4.

  • void setVariant4Mode() set mode to UUID_MODE_VARIANT4.
  • void setRandomMode() set mode to UUID_MODE_RANDOM.
  • uint8_t getMode() returns mode set.

Printable

The UUID class implements the printable interface. This allows one to print the UUID object directly over Serial and any other stream implementing the Print interface. Think Ethernet or SD card.

UUID uuid;

Serial.println(uuid);

// gives same output as

Serial.println(uuid.toCharArray());

Performance

Not tested ESP32 (and many other platforms) yet.

Performance measured with UUID_test.ino shows the following times:

microseconds per byte

Version Function UNO 16 MHz ESP32 240 MHz
0.1.0 seed 4 us
0.1.0 generate 412 us
0.1.0 toCharArray 4 us
0.1.1 seed 4 us
0.1.1 generate 248 us
0.1.1 toCharArray 4 us
0.1.2 generate 156 us
0.1.3 generate 120 us

Note: generating the 16 random bytes already takes ~40 us.

UUID's per second

Version UNO 16 MHz ESP32 240 MHz notes
0.1.0 2000++
0.1.1 4000++ generate both modes
0.1.2 6400++ generate both modes
0.1.3 8200++ generate both modes

Note that this maximum is not realistic e.g. for a server where also other tasks need to be done (listening, transfer etc).

Operation

See examples.

Future

General

  • improve documentation
    • external random input needed
    • background
  • test other platforms
  • investigate entropy harvesting
    • freeRAM, micros, timers, RAM, USB-ID, ...
    • compile constants DATE and TIME
  • GUID as derived class?
    • (further identical?)

Functions

  • add setUpperCase() and setLowerCase(), isUpperCase()
    • one bool flag
  • binary output in a byte array
    • getBinary(uint8_t * array)
    • need to store them from generate.

Examples

  • ESP32 UUID server
    • using timing of the calls as entropy !
  • RTC for entropy
  • EEPROM to store last seeds?

Fixes / optimizations

  • reduce footprint
    • can the buffer be reduced?
    • smaller random generator?

Won't

  • support for { and }
  • add setSeparator(char) and getSeparator() ?
    • minus is the specification.