mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
230 lines
7.9 KiB
Markdown
230 lines
7.9 KiB
Markdown
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
|
[](https://github.com/RobTillaart/INA219/actions/workflows/arduino-lint.yml)
|
|
[](https://github.com/RobTillaart/INA219/actions/workflows/jsoncheck.yml)
|
|
[](https://github.com/RobTillaart/INA219/blob/master/LICENSE)
|
|
[](https://github.com/RobTillaart/INA219/releases)
|
|
|
|
|
|
# INA219
|
|
|
|
Arduino library for INA219 voltage, current and power sensor.
|
|
|
|
|
|
## Description
|
|
|
|
**Experimental** library for the INA219 power sensor.
|
|
|
|
Not tested as I have no hardware available.
|
|
So usage remarks and comments are welcome.
|
|
|
|
**USE WITH CARE**
|
|
|
|
The INA219 is a voltage, current and power measurement device.
|
|
Maxima, see datasheet, chapter 7, esp 7.5
|
|
|
|
| description | max | unit | notes |
|
|
|:--------------|------:|-------:|:------|
|
|
| bus voltage | 32 | Volt | depends on BRNG setting
|
|
| shunt voltage | 320 | mVolt | depends on PGA setting
|
|
|
|
#### special chars
|
|
|
|
- Ω == Ohm = ALT-234 (Windows)
|
|
- µ == micro = ALT-0181 (Windows)
|
|
|
|
|
|
Relates to https://github.com/RobTillaart/INA226
|
|
|
|
|
|
## I2C
|
|
|
|
#### Address
|
|
|
|
The sensor can be configured to use 1 of 16 I2C addresses between 0x40 and 0x4F.
|
|
The address depends on how the A0 and A1 address lines are connected to the SCL, SDA, GND and VCC pins.
|
|
(datasheet chapter 8.5.5.1 Serial Bus Address)
|
|
|
|
|
|
#### Performance
|
|
|
|
Datasheet states it supports 1 KHz .. 2.56 MHz. (to be verified).
|
|
Note: higher speeds need smaller pull up resistors.
|
|
|
|
|
|
## Interface
|
|
|
|
Read datasheet for details.
|
|
|
|
|
|
### Constructor
|
|
|
|
- **INA219(const uint8_t address, TwoWire \*wire = Wire)** Constructor to set address and optional Wire interface.
|
|
- **bool begin(const uint8_t sda, const uint8_t scl)** for ESP32 and ESP8266; initializes the class.
|
|
sets I2C pins.
|
|
Returns true if the INA219 address is on the I2C bus.
|
|
- **bool begin()** UNO ea. initializes the class.
|
|
Returns true if the INA219 address is on the I2C bus.
|
|
- **bool isConnected()** returns true if the INA219 address is on the I2C bus.
|
|
|
|
|
|
### Core Functions
|
|
|
|
Note the power and the current are not meaningful without calibrating
|
|
the sensor. Also the value is not meaningful if there is no shunt connected.
|
|
|
|
- **float getShuntVoltage()** idem.
|
|
- **float getBusVoltage()** idem. Max 32 Volt.
|
|
- **float getPower()** is the current x BusVoltage in Watt.
|
|
- **float getCurrent()** is the current through the shunt in Ampere.
|
|
|
|
Helper functions to convert to the right scale of units.
|
|
|
|
- **float getBusVoltage_mV()** idem, in millivolts.
|
|
- **float getShuntVoltage_mV()** idem, in millivolts.
|
|
- **float getCurrent_mA()** idem in milliAmpere.
|
|
- **float getPower_mW()** idem in milliWatt.
|
|
- **float getShuntVoltage_uV()** idem microVolt.
|
|
- **float getCurrent_uA()** idem in microAmpere.
|
|
- **float getPower_uW()** idem, in microWatt.
|
|
|
|
|
|
### Configuration
|
|
|
|
Note: the conversion time runs in the background and if done value is stored in a register.
|
|
The core functions read from the registers, so they are not blocked,
|
|
but just get the same value if no new is ready.
|
|
|
|
- **void reset()** software power on reset.
|
|
This implies calibration with **setMaxCurrentShunt()** needs to be redone.
|
|
- **bool setBusVoltageRange(uint8_t voltage = 16)** set to 16 or 32.
|
|
Values < 16 map to 16 an values between 16 and 32 map to 32.
|
|
- **uint8_t getBusVoltageRange()** returns 16 or 32.
|
|
- **bool setGain(uint8_t factor =, 1)** factor = 1, 2, 4, 8.
|
|
Determines the shunt voltage range. 40, 80, 160 or 320 mV.
|
|
- **uint8_t getGain()** returns set factor.
|
|
- **bool setBusADC(uint8_t mask = 0x03)** check datasheet for meaning of mask.
|
|
Returns false if mask > 0x0F.
|
|
- **uint8_t getBusADC()** returns mask.
|
|
- **bool setShuntADC(uint8_t mask = 0x03)** check datasheet for meaning of mask.
|
|
Returns false if mask > 0x0F.
|
|
- **uint8_t getShuntADC()** returns mask.
|
|
|
|
mask = both resolution + averaging multiple samples.
|
|
minus - == don't care
|
|
|
|
| bit mask | value | description | conversion time |
|
|
|:----------:|:-------:|:------------------|:---------------:|
|
|
| 0-00 | 0 / 4 | 9 bit resolution | 84 μs |
|
|
| 0-01 | 1 / 5 | 10 bit resolution | 148 μs |
|
|
| 0-10 | 2 / 6 | 11 bit resolution | 276 μs |
|
|
| 0-11 | 3 / 7 | 12 bit resolution | 532 μs |
|
|
| 1000 | 8 | 12 bit 1 sample | 532 μs |
|
|
| 1001 | 9 | 2 samples | 1.06 ms |
|
|
| 1010 | 10 | 4 samples | 2.13 ms |
|
|
| 1011 | 11 | 8 samples | 4.26 ms |
|
|
| 1100 | 12 | 16 samples | 8.51 ms |
|
|
| 1101 | 13 | 32 samples | 17.02 ms |
|
|
| 1110 | 14 | 64 samples | 34.05 ms |
|
|
| 1111 | 15 | 128 samples | 68.10 ms |
|
|
|
|
- note that a new value can take a while depending on value set.
|
|
- note that you cannot set e.g. 9 bits and 16 samples.
|
|
|
|
|
|
### Operating mode
|
|
|
|
See datasheet,
|
|
|
|
- **bool setMode(uint8_t mode = 7)** mode = 0 .. 7
|
|
- **uint8_t getMode()** returns the mode (0..7) set.
|
|
|
|
Descriptive mode functions (wrappers).
|
|
|
|
- **bool shutDown()** mode 0
|
|
- **bool setModeShuntTrigger()** mode 1 - how to trigger to be investigated
|
|
- **bool setModeBusTrigger()** mode 2
|
|
- **bool setModeShuntBusTrigger()** mode 3
|
|
- **bool setModeADCOff()** mode 4 -
|
|
- **bool setModeShuntContinuous()** mode 5
|
|
- **bool setModeBusContinuous()** mode 6
|
|
- **bool setModeShuntBusContinuous()** mode 7 - default
|
|
|
|
|
|
### Calibration
|
|
|
|
See datasheet,
|
|
|
|
Calibration is mandatory for **getCurrent()** and **getPower()** to work.
|
|
|
|
- **bool setMaxCurrentShunt(float ampere = 20.0, float ohm = 0.002)**
|
|
set the calibration register based upon the shunt and the max ampere.
|
|
From this the LSB is derived.
|
|
Note the function will round up the LSB to nearest round value by default.
|
|
This may cause loss of precision. The function may force normalization if underflow detected.
|
|
The user **must** check the return value == true, otherwise the calibration register is **not** set.
|
|
- **bool isCalibrated()** returns true if CurrentLSB has been calculated by **setMaxCurrentShunt()**.
|
|
- **float getCurrentLSB()** returns the LSB in Ampere == precision of the calibration.
|
|
- **float getCurrentLSB_mA()** returns the LSB in milliampere.
|
|
- **float getCurrentLSB_uA()** returns the LSB in microampere.
|
|
- **float getShunt()** returns the value set for the shunt.
|
|
- **float getMaxCurrent()** returns the value for the maxCurrent which can be corrected.
|
|
|
|
To print these values one might use https://github.com/RobTillaart/printHelpers
|
|
to get scientific notation like "3.5e-6"
|
|
|
|
|
|
### debugging
|
|
|
|
- **uint16_t getRegister(uint8_t reg)** fetch registers directly, meant for debugging only.
|
|
|
|
|
|
## Operational
|
|
|
|
See examples..
|
|
|
|
|
|
## Future
|
|
|
|
#### Must
|
|
|
|
- get hardware (+ time) to test
|
|
- test different loads
|
|
- write and verify examples
|
|
- all functions.
|
|
- update documentation
|
|
|
|
#### Should
|
|
|
|
- create unit tests
|
|
- performance
|
|
- verify I2C bus speed
|
|
- verify conversion time
|
|
- Conversion ready flag (8.6.3.2)
|
|
- Math overflow flag (8.6.3.2)
|
|
- add a **setCurrentLSB(uint16_t mA)** function ?
|
|
- maxAmpere as derived value
|
|
|
|
#### Could
|
|
|
|
- calibration
|
|
- initial current 20A and shunt 0.002 Ω in **begin()** ??
|
|
- autocorrect \_current_LSB round number
|
|
- maxCurrent? how much?
|
|
- can the calibration math be optimized
|
|
- integer only?
|
|
- less iterations?
|
|
- local var for current_lsb?
|
|
- ??
|
|
- disconnected load,
|
|
- can it be recognized? => current drop?
|
|
- cache configuration ? ==> 2 bytes
|
|
- what is gained? both getting and setting is faster.
|
|
a few milliseconds per call?
|
|
- about a dozen times used,
|
|
- flag for forced read in functions **setMode(uint8_t mode, bool forced = false)**
|
|
- separate release notes.
|
|
|
|
|
|
|