FRAM_I2C

Arduino library for I2C FRAM

Description

FRAM is a library to read and write (over I2C) to an FRAM module. FRAM is much faster than EEPROM and almost as fast as Arduino UNO RAM. Another imaportant feature is that FRAM keeps its content after a reboot (non-volatile)

Types of FRAM the library should work with

SIZE	TYPE
8KB	MB85RC64T
32KB	MB85RC256V
64KB	MB85RC512T
128KB	MB85RC1MT

Address = 0x50 (default) .. 0x57

Interface

Constructor

FRAM(TwoWire *wire = &Wire) Constructor with optional Wire interface.
int begin(address = 0x50, writeProtectPin = -1) address and writeProtectPin is optional
int begin(sda, scl, address = 0x50, writeProtectPin = -1) idem fro ESP32 a.o.
bool isConnected() checks if the address is visable on the I2C bus

Write & read

Support for basic types and 2 calls for generic object

void write8(memaddr, value) uint8_t
void write16(memaddr, value) uint16_t
void write32(memaddr, value) uint32_t
void write( memaddr, * obj, size) other types / sizes
uint8_t read8(memaddr)
uint16_t read16(memaddr)
uint32_t read32(memaddr)
void read(memaddr, uint8_t * obj, size)

Miscelaneous

bool setWriteProtect(b) make the FRAM writeprotect by pulling line HIGH / LOW. Returns true if a writeProtectPin was defined. Otherwise the FRAM cannot be write protected.
uint16_t getManufacturerID() idem
uint16_t getProductID() idem
uint16_t getSize() returns size in KB.

Operational

See examples

2.0 KiB Raw Blame History