mirror of
https://github.com/RobTillaart/Arduino.git
synced 2024-10-03 18:09:02 -04:00
72 lines
2.7 KiB
Markdown
72 lines
2.7 KiB
Markdown
|
|
[](https://github.com/marketplace/actions/arduino_ci)
|
|
[](https://github.com/RobTillaart/DHTlib/blob/master/LICENSE)
|
|
[](https://github.com/RobTillaart/DHTlib/releases)
|
|
|
|
# DHTlib
|
|
|
|
Arduino library for DHT temperature and humidity sensor. AVR optimized
|
|
|
|
## Description
|
|
|
|
The DHT11, 21, 22, 33 and 44 are relative inexpensive sensors for measuring temperature and humidity.
|
|
|
|
This library can be used for reading both values from these DHT sensors.
|
|
The DHT11 only returns integers (e.g. 20) and does not support negative values.
|
|
The others are quite similar and provide one decimal digit (e.g. 20.2)
|
|
The hardware pins of the sensors and handshake are identical so ideal to combine in one lib.
|
|
|
|
The library (0.1.13 version) is confirmed to work on:
|
|
|
|
- UNO (tested myself)
|
|
- 2009 (tested myself)
|
|
- MEGA2560
|
|
- DUE
|
|
- attiny85 @8MHz
|
|
- Digistump Digix @ 84 MHz
|
|
|
|
Later 0.1.xx versions are optimized for AVR only.
|
|
|
|
More information - http://playground.arduino.cc/Main/DHTLib -
|
|
|
|
For latest version for the DHT, check https://github.com/RobTillaart/DHTNEW
|
|
|
|
## DHT PIN layout from left to right
|
|
|
|
| FRONT | | DESCRIPTION |
|
|
|:----|:----:|:----|
|
|
| pin 1 | | VCC |
|
|
| pin 2 | | DATA |
|
|
| pin 3 | | Not Connected |
|
|
| pin 4 | | GND |
|
|
|
|
|
|
|
## Operational
|
|
|
|
See examples
|
|
|
|
|
|
## Versions:
|
|
|
|
==> See DHTStable library for latest stable version for all platforms.
|
|
|
|
- version 0.1.13 is the last stable version for both AVR and ARM
|
|
- version 0.1.14 and up are not compatible anymore with pre 1.0 Arduino.
|
|
These have breaking changes wrt ARM based arduino's e.g DUE.
|
|
- version 0.1.15 is stable version for AVR only
|
|
- version 0.1.16 and 0.1.17 have breaking changes for DHT11
|
|
- version 0.1.18 works again for DHT11 (avr only)
|
|
- version 0.1.19 fixed masking bug DHT11 (avr only)
|
|
- version 0.1.20 Reduce footprint (34 bytes) by using int8_t as error codes. (thanks to chaveiro)
|
|
- version 0.1.21 replace delay with delayMicroseconds() + small fix (thanks to codingforfun)
|
|
- version 0.1.22 undo delayMicroseconds() for wakeups larger than 8
|
|
- version 0.1.23 fix https://github.com/RobTillaart/Arduino/issues/31
|
|
- version 0.1.24 fix https://github.com/RobTillaart/Arduino/issues/33
|
|
- version 0.1.25 fix https://github.com/RobTillaart/Arduino/issues/80
|
|
- version 0.1.26 Explicit support for AM23XX series and DHT12
|
|
- version 0.1.27 added _disableIRQ flag
|
|
- version 0.1.28 refactor
|
|
- version 0.1.29 fix negative temperature DHT12 - issue #111
|
|
- version 0.1.30 own repo version
|
|
|