alex/GY-63_MS5611
1
0
Fork 0
mirror of https://github.com/RobTillaart/Arduino.git synced 2024-09-19 16:46:11 -04:00
Code Issues Actions Packages Projects Releases Wiki Activity

1.5.1 I2C_EEPROM cleanup

Browse Source
This commit is contained in:
rob tillaart 2021-11-08 13:28:11 +01:00
parent 25164f9333
commit 96b925737c
1 changed files with 0 additions and 128 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

128
libraries/I2C_EEPROM/examples/I2C_eeprom_test/new 2.txt
View File

@ -1,128 +0,0 @@
Try this (not tested)
[code]
//#include <UTFT.h>
#include <SD.h>
#include <Wire.h>
#include <ArduCAM.h>
#include <avr/pgmspace.h>
#define SD_CS 9
//UTFT(byte model, int RS, int WR, int RD, int CS)
//UTFT myGLCD(ITDB32S,A2,A1,A0,10); // Remember to change the model parameter to suit your display module!
//ArduCAM(byte model,int RS, int WR, int RD, int REG_CS, int FIFO_CS)
ArduCAM myCAM(OV2640,A2,A1,A0,A3,10); // Remember to change the model parameter to suit your canera module!
void setup()
{
Serial.begin(115200); // <<<<<<<<<<<<<<<<<<<<<<<
Serial.println("Start arducam test");
//Initialize I2C Bus
Wire.begin();
//Switch to FIFO Mode
myCAM.write_reg(ARDUCHIP_TIM, MODE_MASK);
//Set sensor to JPEG mode. Note don't all the camera modules support JPEG mode
myCAM.OV2640_set_format(JPEG);
//Initialize Camera Module
myCAM.InitCAM();
myCAM.OV2640_set_JPEG_size(OV2640_320x240);
Serial.println("SD.begin");
//Initialize SD Card
if (!SD.begin(SD_CS))
{
Serial.println("SD card failed");
//while (1); //If failed, stop here
}
Serial.println("SD card success");
Serial.println("End setup");
}
void loop()
{
Serial.print(millis());
Serial.println("\tstart loop");
char str[8];
File outFile;
static int k = 0;
uint8_t temp,temp_last;
uint8_t start_capture = 0;
Serial.print(millis());
Serial.println("\tWait trigger from shutter buttom");
//Wait trigger from shutter buttom
if(myCAM.read_reg(ARDUCHIP_TRIG) & SHUTTER_MASK)
{
//Wait until buttom released
while(myCAM.read_reg(ARDUCHIP_TRIG) & SHUTTER_MASK);
start_capture = 1;
}
Serial.print(millis());
Serial.println("\tStart capture I");
//Start capture when detect a valid shutter press
if(start_capture)
{
//Flush the FIFO
myCAM.flush_fifo();
//Start capture
myCAM.start_capture();
}
if(myCAM.read_reg(ARDUCHIP_TRIG) & CAP_DONE_MASK)
{
//Construct a file name
k = k + 1;
itoa(k, str, 10);
strcat(str,".jpg");
//Open the new file
outFile = SD.open(str,FILE_WRITE);
if (! outFile)
{
Serial.print(millis());
Serial.println("\tfailure outfile");
return;
}
Serial.print(millis());
Serial.println("\toutfile succes");
//Enable FIFO
myCAM.enable_fifo();
uint32_t bytecounter = 0;
//Read the first dummy byte from FIFO
temp = myCAM.read_fifo();
//Read JPEG data from FIFO
while( (temp != 0xD9) | (temp_last != 0xFF) )
{
bytecounter++;
if (bytecounter % 32 == 0) Serial.print('.');
if (bytecounter % 1024 == 0) Serial.println;
temp_last = temp;
temp = myCAM.read_fifo();
//Write image data to file
outFile.write(temp);
}
Serial.println();
//Disable FIFO when all the image data is saved to the file
myCAM.disable_fifo();
//Close the file
outFile.close();
//Clear the capture done flag
myCAM.clear_fifo_flag();
//Clear the start capture flag
start_capture = 0;
}
}
[/code]