From 96b925737c8e9c20a1bbcd12d46fc5c8f03d7f99 Mon Sep 17 00:00:00 2001
From: rob tillaart <rob.tillaart@gmail.com>
Date: Mon, 8 Nov 2021 13:28:11 +0100
Subject: [PATCH] 1.5.1 I2C_EEPROM cleanup

---
 .../examples/I2C_eeprom_test/new  2.txt       | 128 ------------------
 1 file changed, 128 deletions(-)
 delete mode 100644 libraries/I2C_EEPROM/examples/I2C_eeprom_test/new  2.txt

diff --git a/libraries/I2C_EEPROM/examples/I2C_eeprom_test/new  2.txt b/libraries/I2C_EEPROM/examples/I2C_eeprom_test/new  2.txt
deleted file mode 100644
index 3e580895..00000000
--- a/libraries/I2C_EEPROM/examples/I2C_eeprom_test/new  2.txt	
+++ /dev/null
@@ -1,128 +0,0 @@
-
-Try this (not tested)
-[code]
-//#include <UTFT.h>
-#include <SD.h>
-#include <Wire.h>
-#include <ArduCAM.h>
-#include <avr/pgmspace.h>
-
-#define SD_CS 9 
-
-
-//UTFT(byte model, int RS, int WR, int RD, int CS)
-//UTFT myGLCD(ITDB32S,A2,A1,A0,10);   // Remember to change the model parameter to suit your display module!
-//ArduCAM(byte model,int RS, int WR, int RD, int REG_CS, int FIFO_CS)
-ArduCAM myCAM(OV2640,A2,A1,A0,A3,10);  // Remember to change the model parameter to suit your canera module!
-
-void setup()
-{
-  Serial.begin(115200); // <<<<<<<<<<<<<<<<<<<<<<<
-  Serial.println("Start arducam test");
-
-  //Initialize I2C Bus
-  Wire.begin();   
-  //Switch to FIFO Mode
-  myCAM.write_reg(ARDUCHIP_TIM, MODE_MASK);
-  //Set sensor to JPEG mode. Note don't all the camera modules support JPEG mode
-  myCAM.OV2640_set_format(JPEG);
-  //Initialize Camera Module
-  myCAM.InitCAM();
-  myCAM.OV2640_set_JPEG_size(OV2640_320x240);
-  
-    Serial.println("SD.begin");
-  //Initialize SD Card
-  if (!SD.begin(SD_CS)) 
-  {
-    Serial.println("SD card failed");
-    //while (1);		//If failed, stop here
-  }
-    Serial.println("SD card success");
-    Serial.println("End setup");
-}
-
-void loop()
-{
-  Serial.print(millis());
-  Serial.println("\tstart loop");
-
-  char str[8];
-  File outFile;
-  static int k = 0;
-  uint8_t temp,temp_last;
-  uint8_t start_capture = 0;
-  
-   Serial.print(millis());
-   Serial.println("\tWait trigger from shutter buttom");
-
-  //Wait trigger from shutter buttom   
-  if(myCAM.read_reg(ARDUCHIP_TRIG) & SHUTTER_MASK)	
-  {
-    //Wait until buttom released
-    while(myCAM.read_reg(ARDUCHIP_TRIG) & SHUTTER_MASK);
-    start_capture = 1;
-  }
-
-
-    Serial.print(millis());
-    Serial.println("\tStart capture I");
-  //Start capture when detect a valid shutter press  
-  if(start_capture)
-  {
-    //Flush the FIFO 
-    myCAM.flush_fifo();		 
-    //Start capture
-    myCAM.start_capture();		 
-  }
-  
-  if(myCAM.read_reg(ARDUCHIP_TRIG) & CAP_DONE_MASK)
-  {
-    //Construct a file name
-    k = k + 1;
-    itoa(k, str, 10); 
-    strcat(str,".jpg");
-    //Open the new file  
-    outFile = SD.open(str,FILE_WRITE);
-    if (! outFile) 
-    {
-      Serial.print(millis());
-      Serial.println("\tfailure outfile");
-      return;
-    }
- 
-     Serial.print(millis());
-      Serial.println("\toutfile succes");
- 
-   //Enable FIFO
-    myCAM.enable_fifo();
-
-    uint32_t bytecounter = 0;
-    //Read the first dummy byte from FIFO
-    temp = myCAM.read_fifo();
-
-    //Read JPEG data from FIFO
-    while( (temp != 0xD9) | (temp_last != 0xFF) )
-    {
-      bytecounter++;
-      if (bytecounter % 32 == 0) Serial.print('.');
-      if (bytecounter %  1024 == 0) Serial.println;
-      temp_last = temp;
-      temp = myCAM.read_fifo();
-      //Write image data to file
-      outFile.write(temp);
-    }
-    Serial.println();
-
-    //Disable FIFO when all the image data is saved to the file
-    myCAM.disable_fifo(); 
-    //Close the file 
-    outFile.close(); 
-    
-    //Clear the capture done flag 
-    myCAM.clear_fifo_flag();
-    //Clear the start capture flag
-    start_capture = 0;
-  }
-}
-
-[/code]
\ No newline at end of file