| .. |
|
adc_dma_test
|
adc_test: fix the failure caused by low expected middle value
|
2020-10-18 10:32:04 +08:00 |
|
dac_dma_test
|
bugfix(adc): missing ranges of ADC codes in ESP32
|
2020-10-12 07:41:03 +00:00 |
|
include/test
|
spi: esp32s3 bringup for spi
|
2020-10-26 11:28:34 +08:00 |
|
param_test
|
driver: Rename "local" tests to "single board" tests, add some description to the names
|
2019-12-12 11:05:04 +11:00 |
|
touch_sensor_test
|
global: enable build uinit test for esp32-s3
|
2020-09-22 15:15:03 +08:00 |
|
CMakeLists.txt
|
cmock: added cmock as component
|
2020-09-02 16:38:37 +08:00 |
|
component.mk
|
driver(adc): fix adc io init bug; add unit test to check;
|
2020-05-12 06:52:26 +00:00 |
|
test_adc2_with_wifi.c
|
global: enable build uinit test for esp32-s3
|
2020-09-22 15:15:03 +08:00 |
|
test_adc_common.c
|
global: enable build uinit test for esp32-s3
|
2020-09-22 15:15:03 +08:00 |
|
test_common_spi.c
|
spi: esp32s3 bringup for spi
|
2020-10-26 11:28:34 +08:00 |
|
test_dac.c
|
global: enable build uinit test for esp32-s3
|
2020-09-22 15:15:03 +08:00 |
|
test_dedicated_gpio.c
|
dedicated gpio: add driver
|
2020-10-20 21:06:09 +08:00 |
|
test_gpio.c
|
driver test: Don't use ESP32-S2 CS1 pin for output test
|
2020-10-14 16:18:55 +11:00 |
|
test_i2c.c
|
global: enable build uinit test for esp32-s3
|
2020-09-22 15:15:03 +08:00 |
|
test_i2s.c
|
global: enable build uinit test for esp32-s3
|
2020-09-22 15:15:03 +08:00 |
|
test_ledc.c
|
global: enable build uinit test for esp32-s3
|
2020-09-22 15:15:03 +08:00 |
|
test_pcnt.c
|
pcnt: replace isr register with isr service in example
|
2020-10-19 11:56:18 +08:00 |
|
test_pwm.c
|
soc: updates caps usage
|
2020-10-17 16:10:17 +08:00 |
|
test_rmt.c
|
rmt: split TX and RX in LL driver
|
2020-11-05 19:00:55 +08:00 |
|
test_rs485.c
|
Bugfix/fix RS485 ut fail
|
2020-10-19 16:17:19 +08:00 |
|
test_rtcio.c
|
global: enable build uinit test for esp32-s3
|
2020-09-22 15:15:03 +08:00 |
|
test_sdio.c
|
soc: updates caps usage
|
2020-10-17 16:10:17 +08:00 |
|
test_sdmmc_sdspi_init.cpp
|
sdspi, vfs_fat: allow sharing SPI bus among devices, and mounting multiple SD cards
|
2020-02-12 15:16:08 +08:00 |
|
test_sigmadelta.c
|
sigma_delta: add periph signal list and support esp32-s3
|
2020-10-29 11:06:28 +08:00 |
|
test_spi_bus_lock.c
|
spi: esp32s3 bringup for spi
|
2020-10-26 11:28:34 +08:00 |
|
test_spi_master.c
|
spi: esp32s3 bringup for spi
|
2020-10-26 11:28:34 +08:00 |
|
test_spi_param.c
|
spi: esp32s3 bringup for spi
|
2020-10-26 11:28:34 +08:00 |
|
test_spi_sio.c
|
global: enable build uinit test for esp32-s3
|
2020-09-22 15:15:03 +08:00 |
|
test_spi_slave_hd.c
|
spi: esp32s3 bringup for spi
|
2020-10-26 11:28:34 +08:00 |
|
test_spi_slave.c
|
spi: esp32s3 bringup for spi
|
2020-10-26 11:28:34 +08:00 |
|
test_timer.c
|
timergroup: refactor unit test to better support future chip
|
2020-11-03 18:16:50 +08:00 |
|
test_uart.c
|
driver: add diagnostic information into UART test, enable flow control
|
2020-10-02 17:33:35 +02:00 |
ff976867b3