esp-idf/components/app_trace/sys_view/Config/SEGGER_SYSVIEW_Conf.h
Angus Gratton a67d5d89e0 Replace all DOS line endings with Unix
Command run was:
git ls-tree -r HEAD --name-only | xargs dos2unix
2018-07-12 19:10:37 +08:00

177 lines
9.3 KiB
C

/*********************************************************************
* SEGGER Microcontroller GmbH & Co. KG *
* The Embedded Experts *
**********************************************************************
* *
* (c) 2015 - 2017 SEGGER Microcontroller GmbH & Co. KG *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER SystemView * Real-time application analysis *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* conditions are met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this list of conditions and the following disclaimer. *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice, this list of conditions and the following *
* disclaimer in the documentation and/or other materials provided *
* with the distribution. *
* *
* o Neither the name of SEGGER Microcontroller GmbH & Co. KG *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
* *
* SystemView version: V2.42 *
* *
**********************************************************************
-------------------------- END-OF-HEADER -----------------------------
File : SEGGER_SYSVIEW_Conf.h
Purpose : SEGGER SystemView configuration.
Revision: $Rev: 5927 $
*/
#ifndef SEGGER_SYSVIEW_CONF_H
#define SEGGER_SYSVIEW_CONF_H
/*********************************************************************
*
* Defines, fixed
*
**********************************************************************
*/
//
// Constants for known core configuration
//
#define SEGGER_SYSVIEW_CORE_OTHER 0
#define SEGGER_SYSVIEW_CORE_CM0 1 // Cortex-M0/M0+/M1
#define SEGGER_SYSVIEW_CORE_CM3 2 // Cortex-M3/M4/M7
#define SEGGER_SYSVIEW_CORE_RX 3 // Renesas RX
#if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)
#ifdef __ARM_ARCH_6M__
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
#elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
#endif
#elif defined(__ICCARM__)
#if (defined (__ARM6M__) && (__CORE__ == __ARM6M__))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
#elif ((defined (__ARM7M__) && (__CORE__ == __ARM7M__)) || (defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
#endif
#elif defined(__CC_ARM)
#if (defined(__TARGET_ARCH_6S_M))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
#elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
#endif
#elif defined(__TI_ARM__)
#ifdef __TI_ARM_V6M0__
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
#elif (defined(__TI_ARM_V7M3__) || defined(__TI_ARM_V7M4__))
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
#endif
#elif defined(__ICCRX__)
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX
#elif defined(__RX)
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX
#endif
#ifndef SEGGER_SYSVIEW_CORE
#define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_OTHER
#endif
/*********************************************************************
*
* Defines, configurable
*
**********************************************************************
*/
/*********************************************************************
*
* SystemView buffer configuration
*/
#define SEGGER_SYSVIEW_RTT_BUFFER_SIZE 1024 // Number of bytes that SystemView uses for the buffer.
#define SEGGER_SYSVIEW_RTT_CHANNEL 1 // The RTT channel that SystemView will use. 0: Auto selection
#define SEGGER_SYSVIEW_USE_STATIC_BUFFER 1 // Use a static buffer to generate events instead of a buffer on the stack
#define SEGGER_SYSVIEW_POST_MORTEM_MODE 0 // 1: Enable post mortem analysis mode
/*********************************************************************
*
* SystemView timestamp configuration
*/
#if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3
#define SEGGER_SYSVIEW_GET_TIMESTAMP() (*(U32 *)(0xE0001004)) // Retrieve a system timestamp. Cortex-M cycle counter.
#define SEGGER_SYSVIEW_TIMESTAMP_BITS 32 // Define number of valid bits low-order delivered by clock source
#else
#define SEGGER_SYSVIEW_GET_TIMESTAMP() SEGGER_SYSVIEW_X_GetTimestamp() // Retrieve a system timestamp via user-defined function
#define SEGGER_SYSVIEW_TIMESTAMP_BITS 32 // Define number of valid bits low-order delivered by SEGGER_SYSVIEW_X_GetTimestamp()
#endif
/*********************************************************************
*
* SystemView Id configuration
*/
//TODO: optimise it
#define SEGGER_SYSVIEW_ID_BASE 0x3F400000 // Default value for the lowest Id reported by the application. Can be overridden by the application via SEGGER_SYSVIEW_SetRAMBase(). (i.e. 0x20000000 when all Ids are an address in this RAM)
#define SEGGER_SYSVIEW_ID_SHIFT 0 // Number of bits to shift the Id to save bandwidth. (i.e. 2 when Ids are 4 byte aligned)
/*********************************************************************
*
* SystemView interrupt configuration
*/
#if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3
#define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32 *)(0xE000ED04)) & 0x1FF) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[8:0] = active vector)
#elif SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM0
#if defined(__ICCARM__)
#define SEGGER_SYSVIEW_GET_INTERRUPT_ID() (__get_IPSR()) // Workaround for IAR, which might do a byte-access to 0xE000ED04. Read IPSR instead.
#else
#define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32 *)(0xE000ED04)) & 0x3F) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[5:0] = active vector)
#endif
#else
#define SEGGER_SYSVIEW_GET_INTERRUPT_ID() SEGGER_SYSVIEW_X_GetInterruptId() // Get the currently active interrupt Id from the user-provided function.
#endif
void SEGGER_SYSVIEW_X_SysView_Lock();
void SEGGER_SYSVIEW_X_SysView_Unlock();
#define SEGGER_SYSVIEW_LOCK() SEGGER_SYSVIEW_X_SysView_Lock()
#define SEGGER_SYSVIEW_UNLOCK() SEGGER_SYSVIEW_X_SysView_Unlock()
#endif // SEGGER_SYSVIEW_CONF_H
/*************************** End of file ****************************/