mirror of
https://github.com/espressif/esp-idf.git
synced 2024-10-05 20:47:46 -04:00
856 lines
33 KiB
C
856 lines
33 KiB
C
/**
|
|
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** Group: lcd configuration registers */
|
|
/** Type of lcd_clock register
|
|
* LCD clock config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_clkcnt_n : R/W; bitpos: [5:0]; default: 3;
|
|
* f_LCD_PCLK = f_LCD_CLK / (reg_clkcnt_N + 1) when reg_clk_equ_sysclk is 0.
|
|
*/
|
|
uint32_t lcd_clkcnt_n:6;
|
|
/** lcd_clk_equ_sysclk : R/W; bitpos: [6]; default: 1;
|
|
* 1: f_LCD_PCLK = f_LCD_CLK. 0: f_LCD_PCLK = f_LCD_CLK / (reg_clkcnt_N + 1).
|
|
*/
|
|
uint32_t lcd_clk_equ_sysclk:1;
|
|
/** lcd_ck_idle_edge : R/W; bitpos: [7]; default: 0;
|
|
* 1: LCD_PCLK line is high when idle 0: LCD_PCLK line is low when idle.
|
|
*/
|
|
uint32_t lcd_ck_idle_edge:1;
|
|
/** lcd_ck_out_edge : R/W; bitpos: [8]; default: 0;
|
|
* 1: LCD_PCLK line is high in the first half data cycle. 0: LCD_PCLK line is low
|
|
* in the second half data cycle.
|
|
*/
|
|
uint32_t lcd_ck_out_edge:1;
|
|
/** lcd_clkm_div_num : R/W; bitpos: [16:9]; default: 4;
|
|
* Integral LCD clock divider value
|
|
*/
|
|
uint32_t lcd_clkm_div_num:8;
|
|
/** lcd_clkm_div_b : R/W; bitpos: [22:17]; default: 0;
|
|
* Fractional clock divider numerator value
|
|
*/
|
|
uint32_t lcd_clkm_div_b:6;
|
|
/** lcd_clkm_div_a : R/W; bitpos: [28:23]; default: 0;
|
|
* Fractional clock divider denominator value
|
|
*/
|
|
uint32_t lcd_clkm_div_a:6;
|
|
/** lcd_clk_sel : R/W; bitpos: [30:29]; default: 0;
|
|
* Select LCD module source clock. 0: no clock. 1: APLL. 2: CLK160. 3: no clock.
|
|
*/
|
|
uint32_t lcd_clk_sel:2;
|
|
/** clk_en : R/W; bitpos: [31]; default: 0;
|
|
* Set this bit to enable clk gate
|
|
*/
|
|
uint32_t clk_en:1;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_clock_reg_t;
|
|
|
|
/** Type of lcd_rgb_yuv register
|
|
* LCD YUV/RGB converter configuration register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
uint32_t reserved_0:20;
|
|
/** lcd_conv_8bits_data_inv : R/W; bitpos: [20]; default: 0;
|
|
* 1:invert every two 8bits input data. 2. disabled.
|
|
*/
|
|
uint32_t lcd_conv_8bits_data_inv:1;
|
|
/** lcd_conv_txtorx : R/W; bitpos: [21]; default: 0;
|
|
* 0: txtorx mode off. 1: txtorx mode on.
|
|
*/
|
|
uint32_t lcd_conv_txtorx:1;
|
|
/** lcd_conv_yuv2yuv_mode : R/W; bitpos: [23:22]; default: 3;
|
|
* 0: to yuv422. 1: to yuv420. 2: to yuv411. 3: disabled. To enable yuv2yuv mode,
|
|
* trans_mode must be set to 1.
|
|
*/
|
|
uint32_t lcd_conv_yuv2yuv_mode:2;
|
|
/** lcd_conv_yuv_mode : R/W; bitpos: [25:24]; default: 0;
|
|
* 0: yuv422. 1: yuv420. 2: yuv411. When in yuv2yuv mode, yuv_mode decides the yuv
|
|
* mode of Data_in
|
|
*/
|
|
uint32_t lcd_conv_yuv_mode:2;
|
|
/** lcd_conv_protocol_mode : R/W; bitpos: [26]; default: 0;
|
|
* 0:BT601. 1:BT709.
|
|
*/
|
|
uint32_t lcd_conv_protocol_mode:1;
|
|
/** lcd_conv_data_out_mode : R/W; bitpos: [27]; default: 0;
|
|
* LIMIT or FULL mode of Data out. 0: limit. 1: full
|
|
*/
|
|
uint32_t lcd_conv_data_out_mode:1;
|
|
/** lcd_conv_data_in_mode : R/W; bitpos: [28]; default: 0;
|
|
* LIMIT or FULL mode of Data in. 0: limit. 1: full
|
|
*/
|
|
uint32_t lcd_conv_data_in_mode:1;
|
|
/** lcd_conv_mode_8bits_on : R/W; bitpos: [29]; default: 0;
|
|
* 0: 16bits mode. 1: 8bits mode.
|
|
*/
|
|
uint32_t lcd_conv_mode_8bits_on:1;
|
|
/** lcd_conv_trans_mode : R/W; bitpos: [30]; default: 0;
|
|
* 0: YUV to RGB. 1: RGB to YUV.
|
|
*/
|
|
uint32_t lcd_conv_trans_mode:1;
|
|
/** lcd_conv_enable : R/W; bitpos: [31]; default: 0;
|
|
* 0: Bypass converter. 1: Enable converter.
|
|
*/
|
|
uint32_t lcd_conv_enable:1;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_rgb_yuv_reg_t;
|
|
|
|
/** Type of lcd_user register
|
|
* LCD config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_dout_cyclelen : R/W; bitpos: [12:0]; default: 1;
|
|
* The output data cycles minus 1 of LCD module.
|
|
*/
|
|
uint32_t lcd_dout_cyclelen:13;
|
|
/** lcd_always_out_en : R/W; bitpos: [13]; default: 0;
|
|
* LCD always output when LCD is in LCD_DOUT state, unless reg_lcd_start is cleared or
|
|
* reg_lcd_reset is set.
|
|
*/
|
|
uint32_t lcd_always_out_en:1;
|
|
/** lcd_dout_byte_swizzle_mode : R/W; bitpos: [16:14]; default: 0;
|
|
* 0: ABAB->BABA. 1: ABC->ACB. 2: ABC->BAC. 3: ABC->BCA. 4:ABC->CAB. 5:ABC->CBA
|
|
*/
|
|
uint32_t lcd_dout_byte_swizzle_mode:3;
|
|
/** lcd_dout_byte_swizzle_enable : R/W; bitpos: [17]; default: 0;
|
|
* 1: enable byte swizzle 0: disable
|
|
*/
|
|
uint32_t lcd_dout_byte_swizzle_enable:1;
|
|
/** lcd_dout_bit_order : R/W; bitpos: [18]; default: 0;
|
|
* 1: change bit order in every byte. 0: Not change.
|
|
*/
|
|
uint32_t lcd_dout_bit_order:1;
|
|
/** lcd_byte_mode : R/W; bitpos: [20:19]; default: 0;
|
|
* 2: 24bit mode. 1: 16bit mode. 0: 8bit mode
|
|
*/
|
|
uint32_t lcd_byte_mode:2;
|
|
/** lcd_update_reg : R/W/SC; bitpos: [21]; default: 0;
|
|
* 1: Update LCD registers, will be cleared by hardware. 0 : Not care.
|
|
*/
|
|
uint32_t lcd_update_reg:1;
|
|
/** lcd_bit_order : R/W; bitpos: [22]; default: 0;
|
|
* 1: Change data bit order, change LCD_DATA_out[7:0] to LCD_DATA_out[0:7] in one byte
|
|
* mode, and bits[15:0] to bits[0:15] in two byte mode. 0: Not change.
|
|
*/
|
|
uint32_t lcd_bit_order:1;
|
|
/** lcd_byte_order : R/W; bitpos: [23]; default: 0;
|
|
* 1: invert data byte order, only valid in 2 byte mode. 0: Not change.
|
|
*/
|
|
uint32_t lcd_byte_order:1;
|
|
/** lcd_dout : R/W; bitpos: [24]; default: 0;
|
|
* 1: Be able to send data out in LCD sequence when LCD starts. 0: Disable.
|
|
*/
|
|
uint32_t lcd_dout:1;
|
|
/** lcd_dummy : R/W; bitpos: [25]; default: 0;
|
|
* 1: Enable DUMMY phase in LCD sequence when LCD starts. 0: Disable.
|
|
*/
|
|
uint32_t lcd_dummy:1;
|
|
/** lcd_cmd : R/W; bitpos: [26]; default: 0;
|
|
* 1: Be able to send command in LCD sequence when LCD starts. 0: Disable.
|
|
*/
|
|
uint32_t lcd_cmd:1;
|
|
/** lcd_start : R/W/SC; bitpos: [27]; default: 0;
|
|
* LCD start sending data enable signal, valid in high level.
|
|
*/
|
|
uint32_t lcd_start:1;
|
|
/** lcd_reset : WT; bitpos: [28]; default: 0;
|
|
* The value of command.
|
|
*/
|
|
uint32_t lcd_reset:1;
|
|
/** lcd_dummy_cyclelen : R/W; bitpos: [30:29]; default: 0;
|
|
* The dummy cycle length minus 1.
|
|
*/
|
|
uint32_t lcd_dummy_cyclelen:2;
|
|
/** lcd_cmd_2_cycle_en : R/W; bitpos: [31]; default: 0;
|
|
* The cycle length of command phase. 1: 2 cycles. 0: 1 cycle.
|
|
*/
|
|
uint32_t lcd_cmd_2_cycle_en:1;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_user_reg_t;
|
|
|
|
/** Type of lcd_misc register
|
|
* LCD config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
uint32_t reserved_0:4;
|
|
/** lcd_wire_mode : R/W; bitpos: [5:4]; default: 0;
|
|
* The wire width of LCD output. 0: 8bit. 1: 16bit 2: 24bit
|
|
*/
|
|
uint32_t lcd_wire_mode:2;
|
|
/** lcd_vfk_cyclelen : R/W; bitpos: [11:6]; default: 3;
|
|
* The setup cycle length minus 1 in LCD non-RGB mode.
|
|
*/
|
|
uint32_t lcd_vfk_cyclelen:6;
|
|
/** lcd_vbk_cyclelen : R/W; bitpos: [24:12]; default: 0;
|
|
* The vertical back blank region cycle length minus 1 in LCD RGB mode, or the hold
|
|
* time cycle length in LCD non-RGB mode.
|
|
*/
|
|
uint32_t lcd_vbk_cyclelen:13;
|
|
/** lcd_next_frame_en : R/W; bitpos: [25]; default: 0;
|
|
* 1: Send the next frame data when the current frame is sent out. 0: LCD stops when
|
|
* the current frame is sent out.
|
|
*/
|
|
uint32_t lcd_next_frame_en:1;
|
|
/** lcd_bk_en : R/W; bitpos: [26]; default: 0;
|
|
* 1: Enable blank region when LCD sends data out. 0: No blank region.
|
|
*/
|
|
uint32_t lcd_bk_en:1;
|
|
/** lcd_afifo_reset : WT; bitpos: [27]; default: 0;
|
|
* LCD AFIFO reset signal.
|
|
*/
|
|
uint32_t lcd_afifo_reset:1;
|
|
/** lcd_cd_data_set : R/W; bitpos: [28]; default: 0;
|
|
* 1: LCD_CD = !reg_cd_idle_edge when lcd_st[2:0] is in LCD_DOUT state. 0: LCD_CD =
|
|
* reg_cd_idle_edge.
|
|
*/
|
|
uint32_t lcd_cd_data_set:1;
|
|
/** lcd_cd_dummy_set : R/W; bitpos: [29]; default: 0;
|
|
* 1: LCD_CD = !reg_cd_idle_edge when lcd_st[2:0] is in LCD_DUMMY state. 0: LCD_CD =
|
|
* reg_cd_idle_edge.
|
|
*/
|
|
uint32_t lcd_cd_dummy_set:1;
|
|
/** lcd_cd_cmd_set : R/W; bitpos: [30]; default: 0;
|
|
* 1: LCD_CD = !reg_cd_idle_edge when lcd_st[2:0] is in LCD_CMD state. 0: LCD_CD =
|
|
* reg_cd_idle_edge.
|
|
*/
|
|
uint32_t lcd_cd_cmd_set:1;
|
|
/** lcd_cd_idle_edge : R/W; bitpos: [31]; default: 0;
|
|
* The default value of LCD_CD.
|
|
*/
|
|
uint32_t lcd_cd_idle_edge:1;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_misc_reg_t;
|
|
|
|
/** Type of lcd_ctrl register
|
|
* LCD config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_hb_front : R/W; bitpos: [10:0]; default: 0;
|
|
* It is the horizontal blank front porch of a frame.
|
|
*/
|
|
uint32_t lcd_hb_front:11;
|
|
/** lcd_va_height : R/W; bitpos: [20:11]; default: 0;
|
|
* It is the vertical active height of a frame.
|
|
*/
|
|
uint32_t lcd_va_height:10;
|
|
/** lcd_vt_height : R/W; bitpos: [30:21]; default: 0;
|
|
* It is the vertical total height of a frame.
|
|
*/
|
|
uint32_t lcd_vt_height:10;
|
|
/** lcd_rgb_mode_en : R/W; bitpos: [31]; default: 0;
|
|
* 1: Enable LCD RGB mode. 0: Disable LCD RGB mode.
|
|
*/
|
|
uint32_t lcd_rgb_mode_en:1;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_ctrl_reg_t;
|
|
|
|
/** Type of lcd_ctrl1 register
|
|
* LCD config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_vb_front : R/W; bitpos: [7:0]; default: 0;
|
|
* It is the vertical blank front porch of a frame.
|
|
*/
|
|
uint32_t lcd_vb_front:8;
|
|
/** lcd_ha_width : R/W; bitpos: [19:8]; default: 0;
|
|
* It is the horizontal active width of a frame.
|
|
*/
|
|
uint32_t lcd_ha_width:12;
|
|
/** lcd_ht_width : R/W; bitpos: [31:20]; default: 0;
|
|
* It is the horizontal total width of a frame.
|
|
*/
|
|
uint32_t lcd_ht_width:12;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_ctrl1_reg_t;
|
|
|
|
/** Type of lcd_ctrl2 register
|
|
* LCD config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_vsync_width : R/W; bitpos: [6:0]; default: 1;
|
|
* It is the position of LCD_VSYNC active pulse in a line.
|
|
*/
|
|
uint32_t lcd_vsync_width:7;
|
|
/** lcd_vsync_idle_pol : R/W; bitpos: [7]; default: 0;
|
|
* It is the idle value of LCD_VSYNC.
|
|
*/
|
|
uint32_t lcd_vsync_idle_pol:1;
|
|
/** lcd_de_idle_pol : R/W; bitpos: [8]; default: 0;
|
|
* It is the idle value of LCD_DE.
|
|
*/
|
|
uint32_t lcd_de_idle_pol:1;
|
|
/** lcd_hs_blank_en : R/W; bitpos: [9]; default: 0;
|
|
* 1: The pulse of LCD_HSYNC is out in vertical blanking lines RGB mode. 0: LCD_HSYNC
|
|
* pulse is valid only in active region lines in RGB mode.
|
|
*/
|
|
uint32_t lcd_hs_blank_en:1;
|
|
uint32_t reserved_10:6;
|
|
/** lcd_hsync_width : R/W; bitpos: [22:16]; default: 1;
|
|
* It is the position of LCD_HSYNC active pulse in a line.
|
|
*/
|
|
uint32_t lcd_hsync_width:7;
|
|
/** lcd_hsync_idle_pol : R/W; bitpos: [23]; default: 0;
|
|
* It is the idle value of LCD_HSYNC.
|
|
*/
|
|
uint32_t lcd_hsync_idle_pol:1;
|
|
/** lcd_hsync_position : R/W; bitpos: [31:24]; default: 0;
|
|
* It is the position of LCD_HSYNC active pulse in a line.
|
|
*/
|
|
uint32_t lcd_hsync_position:8;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_ctrl2_reg_t;
|
|
|
|
/** Type of lcd_first_cmd_val register
|
|
* LCD config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_first_cmd_value : R/W; bitpos: [31:0]; default: 0;
|
|
* The LCD write command value of first cmd cycle.
|
|
*/
|
|
uint32_t lcd_first_cmd_value:32;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_first_cmd_val_reg_t;
|
|
|
|
/** Type of lcd_latter_cmd_val register
|
|
* LCD config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_latter_cmd_value : R/W; bitpos: [31:0]; default: 0;
|
|
* The LCD write command value of latter cmd cycle.
|
|
*/
|
|
uint32_t lcd_latter_cmd_value:32;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_latter_cmd_val_reg_t;
|
|
|
|
/** Type of lcd_dly_mode_cfg1 register
|
|
* LCD config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** dout16_mode : R/W; bitpos: [1:0]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout16_mode:2;
|
|
/** dout17_mode : R/W; bitpos: [3:2]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout17_mode:2;
|
|
/** dout18_mode : R/W; bitpos: [5:4]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout18_mode:2;
|
|
/** dout19_mode : R/W; bitpos: [7:6]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout19_mode:2;
|
|
/** dout20_mode : R/W; bitpos: [9:8]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout20_mode:2;
|
|
/** dout21_mode : R/W; bitpos: [11:10]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout21_mode:2;
|
|
/** dout22_mode : R/W; bitpos: [13:12]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout22_mode:2;
|
|
/** dout23_mode : R/W; bitpos: [15:14]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout23_mode:2;
|
|
/** lcd_cd_mode : R/W; bitpos: [17:16]; default: 0;
|
|
* The output LCD_CD is delayed by module clock LCD_CLK. 0: output without delayed. 1:
|
|
* delay by the positive edge of LCD_CLK. 2: delay by the negative edge of LCD_CLK.
|
|
*/
|
|
uint32_t lcd_cd_mode:2;
|
|
/** lcd_de_mode : R/W; bitpos: [19:18]; default: 0;
|
|
* The output LCD_DE is delayed by module clock LCD_CLK. 0: output without delayed. 1:
|
|
* delay by the positive edge of LCD_CLK. 2: delay by the negative edge of LCD_CLK.
|
|
*/
|
|
uint32_t lcd_de_mode:2;
|
|
/** lcd_hsync_mode : R/W; bitpos: [21:20]; default: 0;
|
|
* The output LCD_HSYNC is delayed by module clock LCD_CLK. 0: output without delayed.
|
|
* 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of LCD_CLK.
|
|
*/
|
|
uint32_t lcd_hsync_mode:2;
|
|
/** lcd_vsync_mode : R/W; bitpos: [23:22]; default: 0;
|
|
* The output LCD_VSYNC is delayed by module clock LCD_CLK. 0: output without delayed.
|
|
* 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of LCD_CLK.
|
|
*/
|
|
uint32_t lcd_vsync_mode:2;
|
|
uint32_t reserved_24:8;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_dly_mode_cfg1_reg_t;
|
|
|
|
/** Type of lcd_dly_mode_cfg2 register
|
|
* LCD config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** dout0_mode : R/W; bitpos: [1:0]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout0_mode:2;
|
|
/** dout1_mode : R/W; bitpos: [3:2]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout1_mode:2;
|
|
/** dout2_mode : R/W; bitpos: [5:4]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout2_mode:2;
|
|
/** dout3_mode : R/W; bitpos: [7:6]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout3_mode:2;
|
|
/** dout4_mode : R/W; bitpos: [9:8]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout4_mode:2;
|
|
/** dout5_mode : R/W; bitpos: [11:10]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout5_mode:2;
|
|
/** dout6_mode : R/W; bitpos: [13:12]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout6_mode:2;
|
|
/** dout7_mode : R/W; bitpos: [15:14]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout7_mode:2;
|
|
/** dout8_mode : R/W; bitpos: [17:16]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout8_mode:2;
|
|
/** dout9_mode : R/W; bitpos: [19:18]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout9_mode:2;
|
|
/** dout10_mode : R/W; bitpos: [21:20]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout10_mode:2;
|
|
/** dout11_mode : R/W; bitpos: [23:22]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout11_mode:2;
|
|
/** dout12_mode : R/W; bitpos: [25:24]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout12_mode:2;
|
|
/** dout13_mode : R/W; bitpos: [27:26]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout13_mode:2;
|
|
/** dout14_mode : R/W; bitpos: [29:28]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout14_mode:2;
|
|
/** dout15_mode : R/W; bitpos: [31:30]; default: 0;
|
|
* The output data bit $n is delayed by module clock LCD_CLK. 0: output without
|
|
* delayed. 1: delay by the positive edge of LCD_CLK. 2: delay by the negative edge of
|
|
* LCD_CLK.
|
|
*/
|
|
uint32_t dout15_mode:2;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lcd_dly_mode_cfg2_reg_t;
|
|
|
|
|
|
/** Group: cam configuration registers */
|
|
/** Type of cam_ctrl register
|
|
* CAM config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** cam_stop_en : R/W; bitpos: [0]; default: 0;
|
|
* Camera stop enable signal, 1: camera stops when DMA Rx FIFO is full. 0: Not stop.
|
|
*/
|
|
uint32_t cam_stop_en:1;
|
|
/** cam_vsync_filter_thres : R/W; bitpos: [3:1]; default: 0;
|
|
* Filter threshold value for CAM_VSYNC signal.
|
|
*/
|
|
uint32_t cam_vsync_filter_thres:3;
|
|
/** cam_update_reg : R/W/SC; bitpos: [4]; default: 0;
|
|
* 1: Update Camera registers, will be cleared by hardware. 0 : Not care.
|
|
*/
|
|
uint32_t cam_update_reg:1;
|
|
/** cam_byte_order : R/W; bitpos: [5]; default: 0;
|
|
* 1: Change data bit order, change CAM_DATA_in[7:0] to CAM_DATA_in[0:7] in one byte
|
|
* mode, and bits[15:0] to bits[0:15] in two byte mode. 0: Not change.
|
|
*/
|
|
uint32_t cam_byte_order:1;
|
|
/** cam_bit_order : R/W; bitpos: [6]; default: 0;
|
|
* 1: invert data byte order, only valid in 2 byte mode. 0: Not change.
|
|
*/
|
|
uint32_t cam_bit_order:1;
|
|
/** cam_line_int_en : R/W; bitpos: [7]; default: 0;
|
|
* 1: Enable to generate CAM_HS_INT. 0: Disable.
|
|
*/
|
|
uint32_t cam_line_int_en:1;
|
|
/** cam_vs_eof_en : R/W; bitpos: [8]; default: 0;
|
|
* 1: CAM_VSYNC to generate in_suc_eof. 0: in_suc_eof is controlled by
|
|
* reg_cam_rec_data_cyclelen.
|
|
*/
|
|
uint32_t cam_vs_eof_en:1;
|
|
/** cam_clkm_div_num : R/W; bitpos: [16:9]; default: 4;
|
|
* Integral Camera clock divider value
|
|
*/
|
|
uint32_t cam_clkm_div_num:8;
|
|
/** cam_clkm_div_b : R/W; bitpos: [22:17]; default: 0;
|
|
* Fractional clock divider numerator value
|
|
*/
|
|
uint32_t cam_clkm_div_b:6;
|
|
/** cam_clkm_div_a : R/W; bitpos: [28:23]; default: 0;
|
|
* Fractional clock divider denominator value
|
|
*/
|
|
uint32_t cam_clkm_div_a:6;
|
|
/** cam_clk_sel : R/W; bitpos: [30:29]; default: 0;
|
|
* Select Camera module source clock. 0: no clock. 1: APLL. 2: CLK160. 3: no clock.
|
|
*/
|
|
uint32_t cam_clk_sel:2;
|
|
uint32_t reserved_31:1;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_cam_ctrl_reg_t;
|
|
|
|
/** Type of cam_ctrl1 register
|
|
* CAM config register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** cam_rec_data_bytelen : R/W; bitpos: [15:0]; default: 0;
|
|
* Camera receive data byte length minus 1 to set DMA in_suc_eof_int.
|
|
*/
|
|
uint32_t cam_rec_data_bytelen:16;
|
|
/** cam_line_int_num : R/W; bitpos: [21:16]; default: 0;
|
|
* The line number minus 1 to generate cam_hs_int.
|
|
*/
|
|
uint32_t cam_line_int_num:6;
|
|
/** cam_clk_inv : R/W; bitpos: [22]; default: 0;
|
|
* 1: Invert the input signal CAM_PCLK. 0: Not invert.
|
|
*/
|
|
uint32_t cam_clk_inv:1;
|
|
/** cam_vsync_filter_en : R/W; bitpos: [23]; default: 0;
|
|
* 1: Enable CAM_VSYNC filter function. 0: bypass.
|
|
*/
|
|
uint32_t cam_vsync_filter_en:1;
|
|
/** cam_2byte_en : R/W; bitpos: [24]; default: 0;
|
|
* 1: The bit number of input data is 9~16. 0: The bit number of input data is 0~8.
|
|
*/
|
|
uint32_t cam_2byte_en:1;
|
|
/** cam_de_inv : R/W; bitpos: [25]; default: 0;
|
|
* CAM_DE invert enable signal, valid in high level.
|
|
*/
|
|
uint32_t cam_de_inv:1;
|
|
/** cam_hsync_inv : R/W; bitpos: [26]; default: 0;
|
|
* CAM_HSYNC invert enable signal, valid in high level.
|
|
*/
|
|
uint32_t cam_hsync_inv:1;
|
|
/** cam_vsync_inv : R/W; bitpos: [27]; default: 0;
|
|
* CAM_VSYNC invert enable signal, valid in high level.
|
|
*/
|
|
uint32_t cam_vsync_inv:1;
|
|
/** cam_vh_de_mode_en : R/W; bitpos: [28]; default: 0;
|
|
* 1: Input control signals are CAM_DE CAM_HSYNC and CAM_VSYNC. 0: Input control
|
|
* signals are CAM_DE and CAM_VSYNC.
|
|
*/
|
|
uint32_t cam_vh_de_mode_en:1;
|
|
/** cam_start : R/W/SC; bitpos: [29]; default: 0;
|
|
* Camera module start signal.
|
|
*/
|
|
uint32_t cam_start:1;
|
|
/** cam_reset : WT; bitpos: [30]; default: 0;
|
|
* Camera module reset signal.
|
|
*/
|
|
uint32_t cam_reset:1;
|
|
/** cam_afifo_reset : WT; bitpos: [31]; default: 0;
|
|
* Camera AFIFO reset signal.
|
|
*/
|
|
uint32_t cam_afifo_reset:1;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_cam_ctrl1_reg_t;
|
|
|
|
/** Type of cam_rgb_yuv register
|
|
* CAM YUV/RGB converter configuration register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
uint32_t reserved_0:21;
|
|
/** cam_conv_8bits_data_inv : R/W; bitpos: [21]; default: 0;
|
|
* 1:invert every two 8bits input data. 2. disabled.
|
|
*/
|
|
uint32_t cam_conv_8bits_data_inv:1;
|
|
/** cam_conv_yuv2yuv_mode : R/W; bitpos: [23:22]; default: 3;
|
|
* 0: to yuv422. 1: to yuv420. 2: to yuv411. 3: disabled. To enable yuv2yuv mode,
|
|
* trans_mode must be set to 1.
|
|
*/
|
|
uint32_t cam_conv_yuv2yuv_mode:2;
|
|
/** cam_conv_yuv_mode : R/W; bitpos: [25:24]; default: 0;
|
|
* 0: yuv422. 1: yuv420. 2: yuv411. When in yuv2yuv mode, yuv_mode decides the yuv
|
|
* mode of Data_in
|
|
*/
|
|
uint32_t cam_conv_yuv_mode:2;
|
|
/** cam_conv_protocol_mode : R/W; bitpos: [26]; default: 0;
|
|
* 0:BT601. 1:BT709.
|
|
*/
|
|
uint32_t cam_conv_protocol_mode:1;
|
|
/** cam_conv_data_out_mode : R/W; bitpos: [27]; default: 0;
|
|
* LIMIT or FULL mode of Data out. 0: limit. 1: full
|
|
*/
|
|
uint32_t cam_conv_data_out_mode:1;
|
|
/** cam_conv_data_in_mode : R/W; bitpos: [28]; default: 0;
|
|
* LIMIT or FULL mode of Data in. 0: limit. 1: full
|
|
*/
|
|
uint32_t cam_conv_data_in_mode:1;
|
|
/** cam_conv_mode_8bits_on : R/W; bitpos: [29]; default: 0;
|
|
* 0: 16bits mode. 1: 8bits mode.
|
|
*/
|
|
uint32_t cam_conv_mode_8bits_on:1;
|
|
/** cam_conv_trans_mode : R/W; bitpos: [30]; default: 0;
|
|
* 0: YUV to RGB. 1: RGB to YUV.
|
|
*/
|
|
uint32_t cam_conv_trans_mode:1;
|
|
/** cam_conv_enable : R/W; bitpos: [31]; default: 0;
|
|
* 0: Bypass converter. 1: Enable converter.
|
|
*/
|
|
uint32_t cam_conv_enable:1;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_cam_rgb_yuv_reg_t;
|
|
|
|
|
|
/** Group: Interrupt registers */
|
|
/** Type of lc_dma_int_ena register
|
|
* LCDCAM interrupt enable register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_vsync_int_ena : R/W; bitpos: [0]; default: 0;
|
|
* The enable bit for LCD frame end interrupt.
|
|
*/
|
|
uint32_t lcd_vsync_int_ena:1;
|
|
/** lcd_trans_done_int_ena : R/W; bitpos: [1]; default: 0;
|
|
* The enable bit for lcd transfer end interrupt.
|
|
*/
|
|
uint32_t lcd_trans_done_int_ena:1;
|
|
/** cam_vsync_int_ena : R/W; bitpos: [2]; default: 0;
|
|
* The enable bit for Camera frame end interrupt.
|
|
*/
|
|
uint32_t cam_vsync_int_ena:1;
|
|
/** cam_hs_int_ena : R/W; bitpos: [3]; default: 0;
|
|
* The enable bit for Camera line interrupt.
|
|
*/
|
|
uint32_t cam_hs_int_ena:1;
|
|
uint32_t reserved_4:28;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lc_dma_int_ena_reg_t;
|
|
|
|
/** Type of lc_dma_int_raw register
|
|
* LCDCAM interrupt raw register, valid in level.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_vsync_int_raw : RO/WTC/SS; bitpos: [0]; default: 0;
|
|
* The raw bit for LCD frame end interrupt.
|
|
*/
|
|
uint32_t lcd_vsync_int_raw:1;
|
|
/** lcd_trans_done_int_raw : RO/WTC/SS; bitpos: [1]; default: 0;
|
|
* The raw bit for lcd transfer end interrupt.
|
|
*/
|
|
uint32_t lcd_trans_done_int_raw:1;
|
|
/** cam_vsync_int_raw : RO/WTC/SS; bitpos: [2]; default: 0;
|
|
* The raw bit for Camera frame end interrupt.
|
|
*/
|
|
uint32_t cam_vsync_int_raw:1;
|
|
/** cam_hs_int_raw : RO/WTC/SS; bitpos: [3]; default: 0;
|
|
* The raw bit for Camera line interrupt.
|
|
*/
|
|
uint32_t cam_hs_int_raw:1;
|
|
uint32_t reserved_4:28;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lc_dma_int_raw_reg_t;
|
|
|
|
/** Type of lc_dma_int_st register
|
|
* LCDCAM interrupt status register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_vsync_int_st : RO; bitpos: [0]; default: 0;
|
|
* The status bit for LCD frame end interrupt.
|
|
*/
|
|
uint32_t lcd_vsync_int_st:1;
|
|
/** lcd_trans_done_int_st : RO; bitpos: [1]; default: 0;
|
|
* The status bit for lcd transfer end interrupt.
|
|
*/
|
|
uint32_t lcd_trans_done_int_st:1;
|
|
/** cam_vsync_int_st : RO; bitpos: [2]; default: 0;
|
|
* The status bit for Camera frame end interrupt.
|
|
*/
|
|
uint32_t cam_vsync_int_st:1;
|
|
/** cam_hs_int_st : RO; bitpos: [3]; default: 0;
|
|
* The status bit for Camera transfer end interrupt.
|
|
*/
|
|
uint32_t cam_hs_int_st:1;
|
|
uint32_t reserved_4:28;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lc_dma_int_st_reg_t;
|
|
|
|
/** Type of lc_dma_int_clr register
|
|
* LCDCAM interrupt clear register.
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lcd_vsync_int_clr : WT; bitpos: [0]; default: 0;
|
|
* The clear bit for LCD frame end interrupt.
|
|
*/
|
|
uint32_t lcd_vsync_int_clr:1;
|
|
/** lcd_trans_done_int_clr : WT; bitpos: [1]; default: 0;
|
|
* The clear bit for lcd transfer end interrupt.
|
|
*/
|
|
uint32_t lcd_trans_done_int_clr:1;
|
|
/** cam_vsync_int_clr : WT; bitpos: [2]; default: 0;
|
|
* The clear bit for Camera frame end interrupt.
|
|
*/
|
|
uint32_t cam_vsync_int_clr:1;
|
|
/** cam_hs_int_clr : WT; bitpos: [3]; default: 0;
|
|
* The clear bit for Camera line interrupt.
|
|
*/
|
|
uint32_t cam_hs_int_clr:1;
|
|
uint32_t reserved_4:28;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lc_dma_int_clr_reg_t;
|
|
|
|
|
|
/** Group: Version register */
|
|
/** Type of lc_reg_date register
|
|
* Version register
|
|
*/
|
|
typedef union {
|
|
struct {
|
|
/** lc_date : R/W; bitpos: [27:0]; default: 36712592;
|
|
* LCD_CAM version control register
|
|
*/
|
|
uint32_t lc_date:28;
|
|
uint32_t reserved_28:4;
|
|
};
|
|
uint32_t val;
|
|
} lcdcam_lc_reg_date_reg_t;
|
|
|
|
|
|
typedef struct lcdcam_dev_t {
|
|
volatile lcdcam_lcd_clock_reg_t lcd_clock;
|
|
volatile lcdcam_cam_ctrl_reg_t cam_ctrl;
|
|
volatile lcdcam_cam_ctrl1_reg_t cam_ctrl1;
|
|
volatile lcdcam_cam_rgb_yuv_reg_t cam_rgb_yuv;
|
|
volatile lcdcam_lcd_rgb_yuv_reg_t lcd_rgb_yuv;
|
|
volatile lcdcam_lcd_user_reg_t lcd_user;
|
|
volatile lcdcam_lcd_misc_reg_t lcd_misc;
|
|
volatile lcdcam_lcd_ctrl_reg_t lcd_ctrl;
|
|
volatile lcdcam_lcd_ctrl1_reg_t lcd_ctrl1;
|
|
volatile lcdcam_lcd_ctrl2_reg_t lcd_ctrl2;
|
|
volatile lcdcam_lcd_first_cmd_val_reg_t lcd_first_cmd_val;
|
|
volatile lcdcam_lcd_latter_cmd_val_reg_t lcd_latter_cmd_val;
|
|
volatile lcdcam_lcd_dly_mode_cfg1_reg_t lcd_dly_mode_cfg1;
|
|
uint32_t reserved_034;
|
|
volatile lcdcam_lcd_dly_mode_cfg2_reg_t lcd_dly_mode_cfg2;
|
|
uint32_t reserved_03c[10];
|
|
volatile lcdcam_lc_dma_int_ena_reg_t lc_dma_int_ena;
|
|
volatile lcdcam_lc_dma_int_raw_reg_t lc_dma_int_raw;
|
|
volatile lcdcam_lc_dma_int_st_reg_t lc_dma_int_st;
|
|
volatile lcdcam_lc_dma_int_clr_reg_t lc_dma_int_clr;
|
|
uint32_t reserved_074[34];
|
|
volatile lcdcam_lc_reg_date_reg_t lc_reg_date;
|
|
} lcdcam_dev_t;
|
|
|
|
|
|
#ifndef __cplusplus
|
|
_Static_assert(sizeof(lcdcam_dev_t) == 0x100, "Invalid size of lcdcam_dev_t structure");
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|