esp-idf/examples/wifi
jgujarathi 6547315dde fix(esp_wifi): Stops roaming app upon application initiated disconnect
Stops roaming app when the application initiates a disconnect.
Roaming app if enabled will be restarted when the station reconnects again.
2024-09-11 11:39:43 +08:00
..
espnow feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
fast_scan feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
ftm fix(esp_wifi): Fix FTM issues in AP-STA mode 2024-09-05 16:02:27 +05:30
getting_started feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
iperf fix(wifi): enable ci build by sdkconfig.ci.esp32p4_with_extconn 2024-09-05 20:29:40 +08:00
itwt feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
power_save feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
roaming fix(esp_wifi): Stops roaming app upon application initiated disconnect 2024-09-11 11:39:43 +08:00
scan feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
smart_config feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
softap_sta feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
wifi_aware feat(examples): add local components via idf_component.yml 2023-09-19 10:38:24 +02:00
wifi_eap_fast feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
wifi_easy_connect/dpp-enrollee feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
wifi_enterprise feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
wps feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
wps_softap_registrar feat(wifi): add wifi support for esp32c61 2024-08-30 20:43:06 +08:00
.build-test-rules.yml fix(wifi): enable ci build by sdkconfig.ci.esp32p4_with_extconn 2024-09-05 20:29:40 +08:00
README.md feat(esp_wifi): Showcase roaming_app capabalities through dedicated example 2024-04-01 23:00:01 +08:00

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-C6 ESP32-S2 ESP32-S3

Wi-Fi Examples

This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.

Example Layout

The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:

  • espnow is the connectionless Wi-Fi communication protocol.
  • fast_scan shows how to use fast scan while connecting to an AP.
  • ftm is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.
  • getting_started contains the basic examples for using Wi-Fi in STA and AP mode.
  • iperf shows the common performance measurements for two ESP running this example.
  • power_save contains a how to use power save mode of Wi-Fi.
  • roaming contains 2 examples that demonstrate roaming capabilities.
  • scan shows how to scan for all the available APs.
  • smart_config shows how ESP connects to a target AP with ESPTOUCH.
  • wifi_eap_fast shows how ESP connects to AP with Wi-Fi enterprise encryption using the EAP-FAST method.
  • wifi_easy_connect shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).
  • wpa2_enterprise shows how ESP connects to AP with WPA2 enterprise encryption.
  • wps contains a how to use the Wi-Fi Protected Setup protocol.

More

See the README.md file in the upper level examples directory for more information about examples.