esp-idf/components/spi_flash/esp32s3/flash_ops_esp32s3.c
2020-09-22 15:15:03 +08:00

121 lines
3.5 KiB
C

// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <string.h>
#include <sys/param.h>
#include "esp_spi_flash.h"
#include "soc/system_reg.h"
#include "soc/soc_memory_layout.h"
#include "esp32s3/rom/spi_flash.h"
#include "esp32s3/rom/cache.h"
#include "bootloader_flash.h"
#include "hal/spi_flash_hal.h"
#include "esp_flash.h"
#include "esp_log.h"
static const char *TAG = "spiflash_s3";
#define SPICACHE SPIMEM0
#define SPIFLASH SPIMEM1
esp_rom_spiflash_result_t IRAM_ATTR spi_flash_write_encrypted_chip(size_t dest_addr, const void *src, size_t size)
{
const spi_flash_guard_funcs_t *ops = spi_flash_guard_get();
esp_rom_spiflash_result_t rc;
assert((dest_addr % 16) == 0);
assert((size % 16) == 0);
if (!esp_ptr_internal(src)) {
uint8_t block[128]; // Need to buffer in RAM as we write
while (size > 0) {
size_t next_block = MIN(size, sizeof(block));
memcpy(block, src, next_block);
esp_rom_spiflash_result_t r = spi_flash_write_encrypted_chip(dest_addr, block, next_block);
if (r != ESP_ROM_SPIFLASH_RESULT_OK) {
return r;
}
size -= next_block;
dest_addr += next_block;
src = ((uint8_t *)src) + next_block;
}
bzero(block, sizeof(block));
return ESP_ROM_SPIFLASH_RESULT_OK;
} else { // Already in internal memory
ESP_LOGV(TAG, "calling SPI_Encrypt_Write addr 0x%x src %p size 0x%x", dest_addr, src, size);
#ifndef CONFIG_SPI_FLASH_USE_LEGACY_IMPL
/* The ROM function SPI_Encrypt_Write assumes ADDR_BITLEN is already set but new
implementation doesn't automatically set this to a usable value */
SPIFLASH.user1.usr_addr_bitlen = 23;
#endif
if (ops && ops->start) {
ops->start();
}
rc = SPI_Encrypt_Write(dest_addr, src, size);
if (ops && ops->end) {
ops->end();
}
return rc;
}
}
esp_err_t spi_flash_wrap_set(spi_flash_wrap_mode_t mode)
{
return bootloader_flash_wrap_set(mode);
}
esp_err_t spi_flash_enable_wrap(uint32_t wrap_size)
{
switch (wrap_size) {
case 8:
return bootloader_flash_wrap_set(FLASH_WRAP_MODE_8B);
case 16:
return bootloader_flash_wrap_set(FLASH_WRAP_MODE_16B);
case 32:
return bootloader_flash_wrap_set(FLASH_WRAP_MODE_32B);
case 64:
return bootloader_flash_wrap_set(FLASH_WRAP_MODE_64B);
default:
return ESP_FAIL;
}
}
void spi_flash_disable_wrap(void)
{
bootloader_flash_wrap_set(FLASH_WRAP_MODE_DISABLE);
}
bool spi_flash_support_wrap_size(uint32_t wrap_size)
{
if (!REG_GET_BIT(SPI_MEM_CTRL_REG(0), SPI_MEM_FREAD_QIO) || !REG_GET_BIT(SPI_MEM_CTRL_REG(0), SPI_MEM_FASTRD_MODE)) {
return ESP_FAIL;
}
switch (wrap_size) {
case 0:
case 8:
case 16:
case 32:
case 64:
return true;
default:
return false;
}
}