esp-idf/components/spi_flash/spi_flash_chip_gd.c
Michael (XIAO Xufeng) b5d04a21fb esp_flash: fix the quad issue for some GD flash chips
The GD flash with product ID 40H, is already used in Wrover-nosufix modules.
2019-11-21 12:26:15 +08:00

109 lines
3.8 KiB
C

// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdlib.h>
#include "spi_flash_chip_generic.h"
#include "spi_flash_defs.h"
#define FLASH_ID_MASK 0xFF00
#define FLASH_SIZE_MASK 0xFF
#define GD25Q_PRODUCT_ID 0x4000
#define GD25LQ_PRODUCT_ID 0x6000
#define WRSR_16B_REQUIRED(chip_id) (((chip_id) & FLASH_ID_MASK) == GD25LQ_PRODUCT_ID || \
((chip_id) & FLASH_SIZE_MASK) <= 0x15)
/* Driver for GD flash chip */
esp_err_t spi_flash_chip_gd_probe(esp_flash_t *chip, uint32_t flash_id)
{
/* Check manufacturer and product IDs match our desired masks */
const uint8_t MFG_ID = 0xC8;
if (flash_id >> 16 != MFG_ID) {
return ESP_ERR_NOT_FOUND;
}
uint32_t product_id = flash_id & FLASH_ID_MASK;
if (product_id != GD25Q_PRODUCT_ID && product_id != GD25LQ_PRODUCT_ID) {
return ESP_ERR_NOT_FOUND;
}
return ESP_OK;
}
esp_err_t spi_flash_chip_gd_set_io_mode(esp_flash_t *chip)
{
if (WRSR_16B_REQUIRED(chip->chip_id)) {
const uint32_t qe = 1<<9;
return spi_flash_common_set_io_mode(chip,
spi_flash_common_write_status_16b_wrsr,
spi_flash_common_read_status_16b_rdsr_rdsr2,
qe);
} else {
const uint32_t qe = 1<<1;
return spi_flash_common_set_io_mode(chip,
spi_flash_common_write_status_8b_wrsr2,
spi_flash_common_read_status_8b_rdsr2,
qe);
}
}
esp_err_t spi_flash_chip_gd_get_io_mode(esp_flash_t *chip, esp_flash_io_mode_t* out_io_mode)
{
/* GD uses bit 1 of SR2 as Quad Enable */
const uint8_t BIT_QE = 1 << 1;
uint32_t sr;
esp_err_t ret = spi_flash_common_read_status_8b_rdsr2(chip, &sr);
if (ret == ESP_OK) {
*out_io_mode = ((sr & BIT_QE)? SPI_FLASH_QOUT: 0);
}
return ret;
}
static const char chip_name[] = "gd";
// The issi chip can use the functions for generic chips except from set read mode and probe,
// So we only replace these two functions.
const spi_flash_chip_t esp_flash_chip_gd = {
.name = chip_name,
.probe = spi_flash_chip_gd_probe,
.reset = spi_flash_chip_generic_reset,
.detect_size = spi_flash_chip_generic_detect_size,
.erase_chip = spi_flash_chip_generic_erase_chip,
.erase_sector = spi_flash_chip_generic_erase_sector,
.erase_block = spi_flash_chip_generic_erase_block,
.sector_size = 4 * 1024,
.block_erase_size = 64 * 1024,
.get_chip_write_protect = spi_flash_chip_generic_get_write_protect,
.set_chip_write_protect = spi_flash_chip_generic_set_write_protect,
// TODO support protected regions on ISSI flash
.num_protectable_regions = 0,
.protectable_regions = NULL,
.get_protected_regions = NULL,
.set_protected_regions = NULL,
.read = spi_flash_chip_generic_read,
.write = spi_flash_chip_generic_write,
.program_page = spi_flash_chip_generic_page_program,
.page_size = 256,
.write_encrypted = spi_flash_chip_generic_write_encrypted,
.wait_idle = spi_flash_chip_generic_wait_idle,
.set_io_mode = spi_flash_chip_gd_set_io_mode,
.get_io_mode = spi_flash_chip_gd_get_io_mode,
};